Pwm dc brushless gear

The blue line is connected to the positive pole, and the orange and white lines are connected to the negative pole motor and the yellow line is connected to the negative pole motor to reverse. If you want PWM speed control, input the 5V PWM signal on the white line. rated voltage DC 12V Idle current 100mA No-load speed 800 rpm For voltage 9-12V (600-800 rpm) Reduction ratio 1:12.5 Line length 15cm weight 58g

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Raterecognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used to control the motors at Box Pack - No Warranty

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used Box Pack - No Warranty

Features - Controlling MCU power supply 6.5-12 V or 3.5-5.5V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate 9600,19200,28400,57600,115200,128000recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate recognized a d to control the motors at the same time,more than 5 Box Pack - No Warranty

Microcontroller ATmega Operating Voltage 5V Input Voltage(recommended) 7-12V Input Voltage(limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz i have also have: -Dc gear motor ( rs) -xbee shield ( rs) -xbee 1mv and 2mv ( rs) -xbee shield for arduino ( rs) we have also many thing for sale related to arduino. price will be negotiable if you are interested to buy. text on given number. 200 rupees will be extra charge for delivery out side lahore. contact: - Box Pack - No Warranty