Pwm dc

This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load. Main technical parameters: Input supply voltage:6V-28VDC The maximum output power: 80W The maximum continuous output current:3A Duty Cycle adjustable:0%-100% Operating instruction: 1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer. Views: 4

DC Motor Speed Control Switch 13KHz 12V-40V 10A Pulse Width Modulation PWM now in Faisalabad Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Package Include: 1 x DC Motor Speed Control Switch Working Voltage: DC 12V – DC 40V Control Power:0.01 – 400W. Static Current:0.02 A (Standby). PWM Duty Cycle:10% -100%. PWM Frequency:13 KHz. Material: Plastic, metal. Size:6cm x 5.5cm x 2.8cm Views: 3

Specifications: Operating voltage: DC12V circuit load capacity: maximum current output per 5A, current up to bus 9A output range: first channel 20% -100%, or 40% -100% (TFL = ON) second channel and second Three channels 10% -100% (Note: The above range only the PWM range, the fan varies depending on the actual control effect.) Temperature probe parameters: 50k B = 3950 thermostat temperature zone error: probe depending on error temperature, Generally 3-5% stall alarm minimum speed: 700-800 rpm function setting switch Description: TFL (No. 1): minimum temperature channel PWM setting, when the state FAN1 PWM minimum 40%, OFF minimum PWM FAN1 is 20%. TP1 TP2 (No.2, 3): Temperature channel control temperature zone should be interpreted as follows in use temperature probe): TP1 TP2 acceleration temperature full speed temperature off 35 ° C 45 ° C off 40 ° C 55 ° C Off 50 ° C 70 ° C 60 ° C A temperature lower than 90 ° C Accelerated temperature, minimum rotation speed at the output; more than all temperature, always full speed at the output. BF1 BF2 (No. 4, 5): Supported FAN1 FAN2 Stall alarm function switch, open channel fan disassembled when supported, controller soundand and light (operate with the puzzle), automatically excluded fan rotation recovered. BF1 and BF2 both open (ON), FAN1, FAN2 or one or both stop, the controller is alarm! Package included: 1x speed controller 1x temperature probe Magnetic buzzer Views: 5

Specifications: – Size: Approx. 96 x 61 x 34mm/3.78 x 2.40 x 1.34” – Input Voltage Range: DC6V-60V – Output Voltage: Linear with load – Output Current: 0A-30A – Continuous Current: 20A – Speed Range: 0% to 100% – Regulation Method: Potentiometer – Regulation Type: Regulating Current – Control Frequency: 15KHz – Wiring Type: Screw terminal Features: – Speed controller is made with high quality circuit board which ensures a longer service life. – This simple and easy-to-use DC motor speed controller has an stable performance. – Designed with a digital display that shows the rate in percentage of actual speed to maximum speed. – This motor speed controller uses screw terminals for convenient and quick wiring. – Comes with a momentary start/stop switch and a speed control potentiometer. Package Included: – 1 x Speed Controller Like our Page Electronics Panga Views: 2

Specifications: Input Voltage: DC6V-60V Output Voltage: Linear with load(voltage drop at motor 2 terminals) Output Current: 0A-30A Continuous Current: Views: 1

Specification: Brand: new Material: Nylon + Plastic + Metal Color: Black (As the pictures shown) Length(approx.): 39.5cm/15.55in Item Type: 5-Port Fan Hub Connector A: 1 – TX4 4-pin Female Connector B: 1 – TX4 4-pin Male for CPU fan (including Detect tach pin) Voltage: DC 12V It is designed for enthusiasts with need for controlling numerous system fans. Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM function, speed control, satisfy your control needs. Compatible with 3-pin / 4-pin fans (Due to 3 pins no PWM controller, 3-pin fans would run in full speed.) Support cable management. Comes with self-stick for easy installation and options to hide the PCB itself. Since only one RPM signal can be read by one motherboard connector, only CPU Fan channel of the PWM splitter carries an RPM signal; Thus the motherboard will only read the RPM signal of the PWM device that is connected to channel 1 of the splitter. Like our page Electronics Panga Views: 2

1. operating voltage: DC 5V-36V; 2. The trigger source: digital high-low (DC3.3V-20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal can be supported frequency range 0–20KHZ. 3. Output capacity: DC 5V-36V, at room temperature, DC 15A, power 400W! 4. Application: High power equipment, motors, bulbs, LED lights, DC motors, micro-pumps, solenoid valve; control the speed of the motor, lamp brightness. 5. life: unlimited-off; 6. Operating temperature: -40-85 °; 7. Size: 3.4 * 1.7 * 1.2cm Views: 3

Introduction H801WiFi communicates with Android cell phone via WiFi to achieve the adjustment function. Router can be set as an access point, you can connect the phone and H801WiFi to the same router. once phone and H801WiFi are connected to the router, you can also set H801WiFi as a wireless access point so that another H801WiFi can connect to it, this way, multiple H801WiFi can be connected wirelessly to extend the distance control and increase the number of the controller. 2. Features (1). Connect and control lamps easily by LED Dimmer. (2). RGBWW output, 5 PWM data paths, each route max 4A. (3). Update frequency is 500HZ. (4). Support 802.11 b / g / n. (5). Fast transmission, the sensitive response. (6). H801WiFi can be controlled separately. (7). More phones can control H801WiFi at the same time. (8). Built-in dozens of effects. 3. Specifications Input voltage: DC5 ~ 24V Consumption: 0.5 W dimensions: 93mm x 46mm x 20mm like our page Electronics Panga Views: 2

Product Description Overview The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Comparison with Arduino UNO: Digital IOs: Arduino Nano and Arduino UNO have exactly same number of Digital IOs (i.e. 14) PWM Channels: Arduino Nano and Arduino UNO have exactly same numbers of PWM Channels (i.e. 6) Clock: Arduino Nano and Arduino UNO have exactly same clock frequency ( MHZ) Flash Memory: Arduino Nano and Arduino UNO have exactly same amount of flash Memory (i.e. 32KB) Data Memory: Arduino Nano and Arduino UNO have exactly same amount of Data Memory / RAM (i.e. 2KB) EEPROM Memory: Arduino Nano and Arduino UNO have exactly same amount of EEPROM Memory / RAM (i.e. 1KB) Box Pack - No Warranty

ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look int type page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz

Product Description It contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. The output enable of the L293D is directly connected to PWM outputs of the Arduino. Can drive 4 DC motors or 2 stepper motors or 2 Servo Up to 4 bi-directional DC motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC Pull down resistors keep motors disabled during power-up reset button 2 external terminal power interface, for seperate logic/motor supplies Tested compatible for Mega, Diecimila & Duemilanove

Price: Seller Type: An Individual Condition: Used Price is Final as Battery is with 2 months backup time warranty. UPS is equipped with advanced features like: Intelligent charging system. PWM output Control. Overload Protection Charges battery even at 170 Volts WAPDA Digital DC volt display Battery / Consumption bar Single UPS or Battery can be purchased separately

Product Description Tis Techstream J Automotive OBD Diagnostic Cable Mini Vci For Toyota Specifications Mini VCI For Toyota Tis Techstream J *Support OEM diagnostic software *Support Diagnostics and Active Tests *good quality Mini VCI Mini-VCI is a high performance diagnostics and reprogramming interface, compatible wit SAEJ (Pass-Thru), provide high speed communication to most of vehicles. Connect to PC with high speed USB 2.0. Mini-VCI can be used with major car factory online diagnostic and ECU reproramming applications, and support a rich third-party applications. Features: Support Toyota TIS OEM diagnostic software Cost-effective, the price of product is only one-third of similar foreign products. High performance with ARM cpu inside. High reliability of products using SMD chip, and certified by CE and FCC. Support all the diagnostic communication protocols needed for Toyota (since ). Upgrade the firmware via to improve product. not only provides commonly used J connector, but also provides the old 22pin connector for Toyota. Using online feedback function for technical support. Supported Protocols: K-Line ISO KWP ISO SAE J PWM SAE J VPW CAN 2.0B ISO CAN ISO Specifications: *Operating Temperature: -20 to 70 ºC (-4 to 158 ºF) *Storage Temperature: -40 to 85 ºC (-40 to 185 ºF) *Diagnostic Interface: 16 PIN *USB Interface: USB 2.0 *Power: DC 5 V - 36 V *Consumption: 0.3 W *Dimensions: 76 mm(2.99)L x 43 mm(1.69)W x 19 mm(0.75)H *Net Weight: 62 g *Gross Weight: 103 g Package includes: - Functional cable - Driver CD: Includes user manual, drivers, and etc Box Pack

Summary Warning: Don't power the LilyPad Arduino with more than 5.5 volts, or plug the power in backwards: you'll kill it. Microcontroller ATmega328V Operating Voltage V Input Voltage V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA Flash Memory 32 KB (of which 2 KB used by bootloader) SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz

Specifications: Microcontroller Atmel ATmega328 Operating Voltage (logic level) 5 V Input Voltage (recommended) 7-12 V Input Voltage (limits) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Dimensions 0.73" x 1.70"

Product Description Tis Techstream J Automotive OBD Diagnostic Cable Mini Vci For Toyota Specifications Mini VCI For Toyota Tis Techstream J *Support OEM diagnostic software *Support Diagnostics and Active Tests *good quality Mini VCI Mini-VCI is a high performance diagnostics and reprogramming interface, compatible wit SAEJ (Pass-Thru), provide high speed communication to most of vehicles. Connect to PC with high speed USB 2.0. Mini-VCI can be used with major car factory online diagnostic and ECU reproramming applications, and support a rich third-party applications. Features: Support Toyota TIS OEM diagnostic software Cost-effective, the price of product is only one-third of similar foreign products. High performance with ARM cpu inside. High reliability of products using SMD chip, and certified by CE and FCC. Support all the diagnostic communication protocols needed for Toyota (since ). Upgrade the firmware via to improve product. not only provides commonly used J connector, but also provides the old 22pin connector for Toyota. Using online feedback function for technical support. Supported Protocols: K-Line ISO KWP ISO SAE J PWM SAE J VPW CAN 2.0B ISO CAN ISO Specifications: *Operating Temperature: -20 to 70 ºC (-4 to 158 ºF) *Storage Temperature: -40 to 85 ºC (-40 to 185 ºF) *Diagnostic Interface: 16 PIN *USB Interface: USB 2.0 *Power: DC 5 V - 36 V *Consumption: 0.3 W *Dimensions: 76 mm(2.99)L x 43 mm(1.69)W x 19 mm(0.75)H *Net Weight: 62 g *Gross Weight: 103 g Package includes: - Functional cable - Driver CD: Includes user manual, drivers, and etc Box Pack - No Warranty

Arduino Nano Arduino Nano technical parameters 1.12 Digital input output port D2 D analog input ports A0 A7 3.1 pairs of ports TTL level serial transceiver RX TX 4.6 PWM ports, D3, D5, D6, D9, D10, D11 5. Microcontroller with Atmel Atmega328P-AU 6. supports USB download and power supply 7. Support for external 5V 12V DC power supply 8. 9V battery-powered support 9. Support ISP Downloads Now Buy Online Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 w w w.matrixelectronic. com Email sales matrixelectronic. com Email info matrixelectronic. com Box Pack

Solar Charge Controller, 30 Amp. Connect your Solar Panel direct with DC appliances, and make your electricity for free. - LCD Display, giving full display. - PWM battery charging - All necessary protections Equipped. - Adjustable controlling parameter of the system. - Easy to install & use. *Total package also available with installation. Views: 13

Description: supports the FAT file system SD carrier supports playback 4Bit ADCPM file format recognition of the voice files automatically support a micro-processor and the control keys can be called any item timbre preservation of operational data when power is turned off voice SD card loading without the help of software support for the combination of playing files (including a combination of dumb) memory contents are classified file specifications: capacity: 32 M to1G capacity SD card; downloadable sampling frequency of 6 kHz to 32 kHz, 36 kHz sampling frequency of audio AD4 6 KHz to 16 KHz audio sampling frequency WAV audio output 16 and bitDAC PWM maximum voice storage 512 votes operating voltage: DC 2.6 to 3.6 V quiescent current: 16 uA (SD card is not inserted) Note: The above product is without delivery charges. Delivery charges will be applicable depending on the city.

20 digital input / output port RX, TX, D2 ~ D13, A0 ~ A5 8 analog input ports A0 ~ A7 1 checks the TTL level serial port transceiver RX / TX 6 two PWM ports, D3, D5, D6, D9, D10, D11 Using Atmel Atmega328P-AU MCU Supports serial download Support for external 3.8V ~ 12V DC power supply Support 12V and below battery-powered Clock frequency of 16MHz Size: 33.3 * 18.0 (mm) Views: 5

Panasonic Ups inverter 1.2 kva 6 Fans 12 led saver 1 Led TV Inverter with built-in pulse width modulation (PWM) solar charge controller Free AC & DC cables Innovative charging system especially designed to suit Pakistani type batteries and local weather conditions Built-in intelligent 3-stage charger control for efficient charging and preventing overcharge User-friendly LCD+LED indications Multiple protections: low battery alarm, low battery shutdown, overload protection, over temperature protection, short circuit protection Views: 13