Pwm dc 6v 12v

This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load. Main technical parameters: Input supply voltage:6V-28VDC The maximum output power: 80W The maximum continuous output current:3A Duty Cycle adjustable:0%-100% Operating instruction: 1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer. Views: 4

DC Motor Speed Control Switch 13KHz 12V-40V 10A Pulse Width Modulation PWM now in Faisalabad Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Package Include: 1 x DC Motor Speed Control Switch Working Voltage: DC 12V – DC 40V Control Power:0.01 – 400W. Static Current:0.02 A (Standby). PWM Duty Cycle:10% -100%. PWM Frequency:13 KHz. Material: Plastic, metal. Size:6cm x 5.5cm x 2.8cm Views: 3

Specifications: Operating voltage: DC12V circuit load capacity: maximum current output per 5A, current up to bus 9A output range: first channel 20% -100%, or 40% -100% (TFL = ON) second channel and second Three channels 10% -100% (Note: The above range only the PWM range, the fan varies depending on the actual control effect.) Temperature probe parameters: 50k B = 3950 thermostat temperature zone error: probe depending on error temperature, Generally 3-5% stall alarm minimum speed: 700-800 rpm function setting switch Description: TFL (No. 1): minimum temperature channel PWM setting, when the state FAN1 PWM minimum 40%, OFF minimum PWM FAN1 is 20%. TP1 TP2 (No.2, 3): Temperature channel control temperature zone should be interpreted as follows in use temperature probe): TP1 TP2 acceleration temperature full speed temperature off 35 ° C 45 ° C off 40 ° C 55 ° C Off 50 ° C 70 ° C 60 ° C A temperature lower than 90 ° C Accelerated temperature, minimum rotation speed at the output; more than all temperature, always full speed at the output. BF1 BF2 (No. 4, 5): Supported FAN1 FAN2 Stall alarm function switch, open channel fan disassembled when supported, controller soundand and light (operate with the puzzle), automatically excluded fan rotation recovered. BF1 and BF2 both open (ON), FAN1, FAN2 or one or both stop, the controller is alarm! Package included: 1x speed controller 1x temperature probe Magnetic buzzer Views: 5

Price: Seller Type: An Individual Condition: Used Feature: The most important feature of this solar charge controller is simple PWM design, low cost, heavy duty microcontroller based design, available BOOST / trickle charging to control the voltage & current according to batteries: a)    Solar Charger Micro-controller intelligent Fully automatic system b)   Day/Night switch for Street light OR Auto ON/OFF system in day (means LOAD OFF in a full day due to sun light power detector system) or night (means LOAD ON in a full Night or sun light power not available in this time). c)    Flout & Boost charging option d)    BOOST Flout: Charging option 14.2 for boost & Flout for % full battery charging. e)    LBCO Low Battery Cut OFF; disconnect the load when battery potential low. f)     Low Battery protection: Low battery cut-off for safe to load 10.5VDC for 12V battery. g)    Reverse diode protection. h)    Charging indicator show the battery charging & battery potential gradually increases. i)     When Solar connect in a day or sun rise SOLAR ON indicator glow. Means sufficient power available for battery charging. j)     Available from single battery 12VDC to 32-Battery bank system 384VDC, with all full options. k)    Compact Design fits Your Working Environment Open circuit voltages as compare to desire charging for a Battery 12V max open circuit voltages = 19VDC/20VDC Applications: This solar charger suitable for following types of solar applications: a)    Street Light. b)   Solar home light/ garden light. c)    Battery Charging from the P.V Solar module. d)    Low Battery protection, may be used for sensitive equipment like medical, I.T related computer base systems & etc… Indicator: (Picture 1) start from left to right. Day/Night mode means select a street light auto on/off function, when solar panels generate the power means sun light available then load automatically off. When sun light not available or solar panels not generating the power the load/street light automatically on. Load indicator, bright indicate there is output, Load could work, “off” indicate there is not output, and Load can not work. This is normal phenomenon. When the battery voltage recovers to 12.6V or (25.2v), the Load will be automatically working, at this time the indicator is off. 3. Charger Indicator cct, red; bright indicate the voltage of the battery is require to charge OR Charger circuit ready to charge the battery in solar available. Charging Indicator, green, bright indicate the battery need to charge OR on charging, flickering means float charging, off means charge has stop. Solar indicator means solar energy available. Available at Karachi Pakistan pls call or visit at ARDL (Anosha Research & Development electronics Lab): Lab-2 LS-43 Bolck-15 Dastagir Society Karachi-, ,

Specification: Brand: new Material: Nylon + Plastic + Metal Color: Black (As the pictures shown) Length(approx.): 39.5cm/15.55in Item Type: 5-Port Fan Hub Connector A: 1 – TX4 4-pin Female Connector B: 1 – TX4 4-pin Male for CPU fan (including Detect tach pin) Voltage: DC 12V It is designed for enthusiasts with need for controlling numerous system fans. Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM function, speed control, satisfy your control needs. Compatible with 3-pin / 4-pin fans (Due to 3 pins no PWM controller, 3-pin fans would run in full speed.) Support cable management. Comes with self-stick for easy installation and options to hide the PCB itself. Since only one RPM signal can be read by one motherboard connector, only CPU Fan channel of the PWM splitter carries an RPM signal; Thus the motherboard will only read the RPM signal of the PWM device that is connected to channel 1 of the splitter. Like our page Electronics Panga Views: 2

Bluetooth 5.0 Large Color LCD Screen Handsfree Mic Call & Recording Supply: DC 5V 12V/DC 6V 12V Built-in 2 * 25W Amplifier Size: 92*41MM

This super capacity battery box performs little resistance, Over-charge super storing capacity,multi-recyclable times and non-memory. With its multi-protective device, the inner circuit prevents the box from over-recharging or over-discharging.Under the monitor of our computer, the quality can be assured. This Rechargeable battery is a 12V 6800mah Li-ion Battery and it is specially designed for powering the system device which uses 12V DC power. You can use this battery to power our powerful wireless transmitter, CCTV camera, PTCL modems and so on. Suitable for your need. Features: Battery type: Rechargeable Li-on battery Capacity: 6800mAh Input voltage: 12.6V Output voltage: 12.6-10.8V DC Specially designed for the system devices which use 12V power Built-in ON/OFF switch to save power usage Super storage capacity Large mah value means long battery Over charge/discharge protection With working indicator Suitable for all 12V devices Views: 6

20 digital input / output port RX, TX, D2 ~ D13, A0 ~ A5 8 analog input ports A0 ~ A7 1 checks the TTL level serial port transceiver RX / TX 6 two PWM ports, D3, D5, D6, D9, D10, D11 Using Atmel Atmega328P-AU MCU Supports serial download Support for external 3.8V ~ 12V DC power supply Support 12V and below battery-powered Clock frequency of 16MHz Size: 33.3 * 18.0 (mm) Views: 5

Arduino Nano Arduino Nano technical parameters 1.12 Digital input output port D2 D analog input ports A0 A7 3.1 pairs of ports TTL level serial transceiver RX TX 4.6 PWM ports, D3, D5, D6, D9, D10, D11 5. Microcontroller with Atmel Atmega328P-AU 6. supports USB download and power supply 7. Support for external 5V 12V DC power supply 8. 9V battery-powered support 9. Support ISP Downloads Now Buy Online Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 w w w.matrixelectronic. com Email sales matrixelectronic. com Email info matrixelectronic. com Box Pack