Ultrasonic distance sensor mounting

Thickness:2.8-3.1mm Fixing Hole Diameter: 3.8MM Material: Acrylic

HCSR04 Ultrasonic module 4PIN Module main technical parameters: 1.Working Voltage : 5V(DC) 2.Static current: Less than 2mA. 3.Output signal: Electric frequency signal, high level 5V, low level 0V. 4.Sensor angle: Not more than 15 degrees. 5.Detection distance: 2cm-450cm. for complete spec visit our web site http://www.matrixelectronic.com/Development-tools/distance-sensor-module/ULTRASONIC-MODULE Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping))) ultrasonic distance sensor. Signal can be read from the 4-pin interface (Vcc,Trig,Echo,Gnd). As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface Vcc,Trig,Echo,Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface Vcc,Trig,Echo,Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Box Pack - No Warranty

Product feature: HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm—400cm., and the range accuracy is up to 2mm; the module includes ultrasonic transmitter, receiver and control circuit. Electric parameter: HC-SR04 ultrasonic module Operating voltage DC 5V Operating current 15 mA Operating frequency 40 Hz Utmost range 4 m Nearest range 2cm Measure angel 15° Input trigger signal 10uS TTL pluse Output echo signal Output TTL level signal, proportional to the range specification mm" Box Pack - No Warranty

Product feature HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm400cm., and the range accuracy is up to 2mm the module includes ultrasonic transmitter, receiver and control circuit. Electric parameter HC-SR04 ultrasonic module Operating voltage DC 5V Operating current 15 mA Operating frequency 40 Hz Utmost range 4 m Nearest range 2cm Measure angel 15 Input trigger signal 10uS TTL pluse Output echo signal Output TTL level signal, proportional to the range specification 452015 mm

Description The module performance is stable, measure the distance accurately Feature Voltage DC5V Static current less than 2mA Level output high-5V Level output the end of 0V Sensor angle not more than 15 degrees Detection distance 2cm-450cm High precision up to 0.3cm Connection VCC, trig control side, echo receiving end, GND

Improves parking safety. Detection in all directions without dead angle. Minimize bumper damage. Totally built-in installation without impair overall appearance. Indicates object distance with different beeping frequencies. The sensor antenna activates 3 types of acoustic signals during approaching an obstacle at different distances. A continuous sound of Beep approximately between 0-0.3m A short interval sound of Beep approximately between m A long interval sound of Beep approximately between m Simple and concealed installation. The sensor antenna is entirely installed inside the bumper without any drilling work. Maintenance free, no cleaning or washing is required. Fit for any car, truck, RV or mini-van. Peel & Stick Antenna foil tape sensor for vehicles bumpers. Wires to Reverse Lamp (12 Volts DC) High output Piezo buzzer alert you with a beeping sound Detects object at 3 feet or less PD1 Rear parking sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker. When reverse gear is engaged the PD1 Rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones (Zones) alerting you of your proximity in relation to surrounding objects! The full length of your bumper (including the sides) is protected with an ever increasing beeping sound. As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first. Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound Installation: The Universal Parking Dynamics PD1 is compatible with any Car, Vehicle, Van, 4x4, MPV, SUV and Motor home that has a plastic bumper and as 99.9% of cars and vehicles have plastic bumpers, you have no need to be concerned, even if your bumper appears part metal the PD1 will work. If you are in any doubt please contact us. The PD1 antenna is easy to fit and requires no bumper adjustments or holes ensuring a damage free installation. The antenna is cost effective to replace should you wish to move the sensor to a new car in the future or simply require a replacement. Mounting the Electronic Control Unit (ECU): The Rear ECU can be installed in various locations such as inside of the boot behind the trim or inside your rear bumper with the included adhesive mount. The Front ECU can be installed inside of the engine bay or behind the glove box, dashboard or trim with the included adhesive mount. Mounting the Speaker: Mount the parking sensor speaker using the included adhesive mount. The volume is loud enough to provide a good warning even if mounted behind your vehicles interior trim. This connects to the ECU by push fit connection. Can be extended up to 15M and will mount in any location. Mounting the Antenna: Mount the adhesive metallic parking sensor antenna onto the inner side of the front and/or rear bumper (depending upon which sensor option you choose) making sure the bumper surface is clean before attaching. Ensure the terminal connector is on the side where you have located the ECU. When the antenna has been attached, covering the whole of the bumper from left to right (leaving approx 15cm from the edges); the excess length is cut off. Place a piece of the included adhesive material or tape at either end of the antenna to ensure a secure installation onto the bumper. Its recommended (but not essential) to cover antenna length with a black anti-rust protection paint that is applied to the underneath of a car chassis or similar to protect from the elements. It is important that the antenna is installed at the highest part from the ground that corresponds to the furthest distance from the vehicle body as a precaution to prevent any interference from nearby metal parts. The recommended position of the parking sensor antenna is at least 40cm from ground level, with 50cm being optimum. Once the bumper is removed, if your vehicle has a metal crash protection bar and the antenna will be within 3 cm's of this metal bar (once the bumper is re-fitted) you can install a 2nd Antenna (included with all PD1 sensors) to prevent any reduction in detection range or insulate the metal crash bar. Courier TO Any CIty Avalable Box Pack - No Warranty

AR842A+ SMART SENSOR Infrared Thermometer AR842A+ Temperature Range -50C to 600C -58F to 1112F Accuracy ±1.5% or ±1.5C Distance Spot Ratio 12:1 Emissivity 0.1 to 1.0 adjustable Resolution 0.1 C or 0.1 F Response Time & Wavelengh 500ms & (8-14)um Repeatability ±1% or ±1C Triopod Mounting √ Average And Difference Function √ Max And Min Function √ High Low Temperature Alarm Setup √ Data Store/Recall Function √ C/ F Selection √ Data Hold Function √ Laser Target Pointer Selection √ Backlight Display Selection √ Auto Power Shut Off √ Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

AR842A+ SMART SENSOR Infrared Thermometer AR842A+ Temperature Range -50C to 600C -58F to F Accuracy ±1.5% or ±1.5C Distance Spot Ratio 12:1 Emissivity 0.1 to 1.0 adjustable Resolution 0.1 C or 0.1 F Response Time & Wavelength 500ms & (8-14)um Repeatability ±1% or ±1C Triopod Mounting √ Average And Difference Function √ Max And Min Function √ High Low Temperature Alarm Setup √ Data Store/Recall Function √ C/ F Selection √ Data Hold Function √ Laser Target Pointer Selection √ Backlight Display Selection √ Auto Power Shut Off √ Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Box Pack - No Warranty

Features: Multifunctional, includes all vital functions. Easy to read, big four-line backlit LCD display. With touch button, easy to control. With mounting accessories for firm installation. Easy installation, no tools required. Powered by 2 * CR battery. Durable and water-resistant for use in all conditions. Ideal companion for your riding. Functions: 1.SPD CURRENT SPEED 2.ODO ODOMETER 3.DST TRIPDISTANCE 4.MXS MAXIMUM SPEED 5.AVS AVERAGE SPEED 6.TTM TOTAL TRIP TIME 7.TM TRIP TIME 8.RAT RIDING ALL TIME 9.CLK CLOCK?12H/24H? 10.SW STOPWATCH 11.TEMPERATURE (-.TM UP TRIP TIME UP 13.TM DN TRIP TIME DOWN 14.TRIP UP TRIP DISTANCE UP 15.TRIP DN TRIP DISTANCE DOWN 16.“+”“-”COMPAPATOR 17.MAINTENANCE ALERT 18.CARE REMINDER 19.OVER-SPEED REMINDER 20.LOW BATTREY INDICATOR 21.SETTING TYRE CIRCUMFERENCE?0mm?mm? 22.SETTING THE LAST VALUE OF ODOMETER / ODO 23.SETTING THE LAST VALUE OF TOTAL TIME 24.FREEZE FRAME MEMORY 25.LCD BACKLIGHT 26.WIRED REMOTE CONTROL 27.SMART BACK LIGHT 28.AUTO ON/OFF 29.WIRELESS TRANSMISSION Specifications: Color: Black Power source: 2 x CR battery Dimensions: 7.3 x 4.4 x 1.6cm / 2.9 x 1.7 x 0.6in LCD Screen: 5.1 x 3.7cm / 2.0 x 1.5in Net weight: 45g / 1.6oz Package size: 14 x 7 x 4cm / 5.5 x 2.8 x 1.6in Package weight: 112g / 4oz Package List: 1 * LCD Bicycle Computer 1 * Sensor Transmitter 1 * Mounting Shoe 1 * Wheel Magnet 1 * Set of Cable Ties 1 * User Manual(English)