Ultrasonic distance ping

HCSR04 Ultrasonic module 4PIN Module main technical parameters: 1.Working Voltage : 5V(DC) 2.Static current: Less than 2mA. 3.Output signal: Electric frequency signal, high level 5V, low level 0V. 4.Sensor angle: Not more than 15 degrees. 5.Detection distance: 2cm-450cm. for complete spec visit our web site http://www.matrixelectronic.com/Development-tools/distance-sensor-module/ULTRASONIC-MODULE Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping))) ultrasonic distance sensor. Signal can be read from the 4-pin interface (Vcc,Trig,Echo,Gnd). As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface. i,e Vcc,Trig,Echo and Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface Vcc,Trig,Echo,Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com Box Pack - No Warranty

The HC-SR04 ultrasonic sensor is a distance sensor similar to Parallax's Ping ultrasonic distance sensor. Signal can be read from the 4-pin interface Vcc,Trig,Echo,Gnd. As compared to Parallax ping sensor, one pin is used to trigger the signal and another one is reading the echo. This distance sensor offers both accuracy and stable readings that is not affected by sunlight or black material. Perfect for collision avoidance on your next robotic project. Features Ranging distance: 2 cm to 400 cm Ranging accuracy: 3 mm Supply Voltage: 5V Current: 15mA Frequency: 40Hz Measuring angle: 15 degrees Ping distance sensor or Arduino ultrasonic sensor category Included hardware 1x sensor module" Facebook page;ElectronicsArena.com

Product feature: HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm—400cm., and the range accuracy is up to 2mm; the module includes ultrasonic transmitter, receiver and control circuit. Electric parameter: HC-SR04 ultrasonic module Operating voltage DC 5V Operating current 15 mA Operating frequency 40 Hz Utmost range 4 m Nearest range 2cm Measure angel 15° Input trigger signal 10uS TTL pluse Output echo signal Output TTL level signal, proportional to the range specification mm" Box Pack - No Warranty

Product feature HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm400cm., and the range accuracy is up to 2mm the module includes ultrasonic transmitter, receiver and control circuit. Electric parameter HC-SR04 ultrasonic module Operating voltage DC 5V Operating current 15 mA Operating frequency 40 Hz Utmost range 4 m Nearest range 2cm Measure angel 15 Input trigger signal 10uS TTL pluse Output echo signal Output TTL level signal, proportional to the range specification 452015 mm

Thickness:2.8-3.1mm Fixing Hole Diameter: 3.8MM Material: Acrylic

Description The module performance is stable, measure the distance accurately Feature Voltage DC5V Static current less than 2mA Level output high-5V Level output the end of 0V Sensor angle not more than 15 degrees Detection distance 2cm-450cm High precision up to 0.3cm Connection VCC, trig control side, echo receiving end, GND

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 5GHz 300Mbps 13dBi Outdoor Access Point (CPE510) with express shipping all over Pakistan.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.   5GHz 300Mbps 13dBi Outdoor CPE  CPE510 • Built-in 13dBi Dual-polarized • Directional Antenna • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes • 6KV Lightning Protection • Weather Proof Enclosure • 15KV ESD Protection • Passive PoE Adapter   Specification: HARDWARE FEATURES Processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   Features: • Built-in 13dBi 2x2 dual-polarized directional MIMO antenna • Adjustable transmission power from 0 to 23dBm/200mw • System-level optimization for more than 15km long range wireless transmission • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications • Centralized Management System – Pharos Control • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.   Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference   15km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+, tested in the field.   TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE510 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. What it does O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. 5km+ transmission Range O3 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km. Auto-bridge For Two Device O3 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O3 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Professional Outdoor Design Equipped with IP64 waterproof enclouse and high quality hardware design, O3 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. P2MP Link Link multi AP in a network, all the associated client can communicate with each other. Easy to Setup and Manage O3 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Assistant.   Specifications: Mode                                                                                                 O3 Dimension 270*94.86*67.5mm Deployment Pole Mount Application Scenarios WISP CPE, Data transmission and Long range video surveillance Frequency 2.4GHz Maximum wireless speed 150Mbps Interface 2*10/100Mbps Ethernet Port Antenna 12dbi Antenna Beamwidth Horizontal: 60° Elevation: 30° Reset Button 1 GND Terminal 1 Power Consumption 4.3W Waterproof Level IP64 LED indicator PoE/LAN,LED1,LED2,LED3 Power Method 12V1A Passive PoE Lightning Protection 6000V Passive PoE power supply Passive power over ethenet via PoE/LAN (4,5pins -7,8pins) Voltage range: 11-13.8V DC Reception Sensitivity MCS0: -96dbm MCS7: -72dbm Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router Standard&Protocol IEEE 802.11b/g/n Enable/Disable Wireless Radio Support SSID Hidden Support Wireless Client isolation Support SSID Isolation Support Client Limitation For SSID Support Wireless Access Control Support Weak Signal Client Limitation Support Transmit Power Adjustable power by 1dBm WMM Capable Support APSD Capable Support Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmission Media Support VLAN Tagging for SSID Support DHCP Server Support VPN Pass-through PPTP,L2TP Remote Web access Support Schedule Reboot Support Page Timeout Support Ping Watchdog Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Time&Date Setting Support Firmware Upgrade Support Backup/Restore Configuration Support Username Managerment Support Syslog Support Managed By Controller PC Software -- CPE Assistant Package Content 1*5km Point to Point Outdoor CPE 1*Power Adapter 1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide Temperature Operating Temperature:-30℃ ~ 60℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings Default login IP:192.168.2.1 Default Login Username:admin Default Login Password:admin Certification FCC/CE/RoHS

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.