Pic microcontroller

For learning micro controller or Hardware Programming. best for professional or students. 1 USB wire computer interfacing. 1 adapter power supply 5 jumping wires. Compact and Ready to use design. High Quality Two layer PTH PCB. Board Supports PIC 16F877/18F4520/4580 Micro controllers. Includes PIC18F4550 Micro controller with built in USB Peripheral. Screw terminal for External power Supply (with Jumper Select Option). ULN2803 for high power using. External Power Supply range of 7V to 20V. Adaptor (any standard 9-12V power supply) option. RS-232 Interface (For direct connection to PC’s serial port). On board Two Line LCD Display (2×16). On board I2C EEPROM (4K-AT24C04). Three multiplexed 7-Segment LED Display. Built in Matrix keyboard (16 keys). Built in 8 LED Interface to test I/O. On Board External Interrupt and Reset buttons. Built in Pot interface to ADC. On Board Buzzer Interface. On Board PICKIT2 Connector for Debugging/Programming. On Board 20 MHz Crystal Oscillator. On Board Power LED Indicator. All Port Pins available at IDC (2×5) Connector. Can be used as main board for developing applications. Power Supply Reverse Polarity Protection. On Board 1 Amp Voltage Regulator. 7805 voltage regulator for smooth voltage. HEX codes included for testing of board features. Example codes included. Views: 6

Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions) The seat supports the following programming microcontroller: PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Views: 3

Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat cannot be programmed the chip is programmed functions) The seat supports the following programming microcontroller: PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Views: 5

MCD2 Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 w w w.matrixelectronic. com Email: sales @ matrixelectronic. com Email: info @ matrixelectronic. com Description: MCD2 MPLAB ICD2 PIC Debugger/Programmer+Programming Module Description New design Enhanced USB ICD2 PIC debugger and programmer for Microchip's PIC and dsPIC digital signal controllers. Using the powerful user interface of the MPLAB IDE (Intergrated Development Environment). USB ICD2 In-circuit Debugger and Programmer: -USB (Full Speed 2 M bits/s) / RS-232 interface to host PC -Real time background debugging -MPLAB IDE GUI (free copy included) -Built in over-voltage/short circuit monitor -Firmware upgradeable from PC -Totally enclosed -Supports low voltage to 2.0 volts. (2.0 to 6.0 range) -Diagnostic LEDs (Power, Busy, Error) -Reading/Writing memory space and EEDATA areas of target microcontroller

MCD2 Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com Description: MCD2 MPLAB ICD2 PIC Debugger/Programmer+Programming Module Description New design Enhanced USB ICD2 PIC debugger and programmer for Microchip s PIC and dsPIC digital signal controllers. Using the powerful user interface of the MPLAB IDE (Intergrated Development Environment). USB ICD2 In-circuit Debugger and Programmer: -USB (Full Speed 2 M bits/s) / RS-232 interface to host PC -Real time background debugging -MPLAB IDE GUI (free copy included) -Built in over-voltage/short circuit monitor -Firmware upgradeable from PC -Totally enclosed -Supports low voltage to 2.0 volts. (2.0 to 6.0 range) -Diagnostic LEDs (Power, Busy, Error) -Reading/Writing memory space and EEDATA areas of target microcontroller

PICKIT3 Programmer Description: USB (Full speed 12 Mbits/s interface to host PC) Real-time execution MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 2.0 volts (2.0v to 6.0v range) Diagnostic LEDs (power, busy, error) Read/write program and data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-Go The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). Universal Programmer Seat Description: Instructions for use: Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions) The seat supports the following programming microcontroller: PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Views: 5

PICKIT3 Programmer Description: USB (Full speed 12 Mbits/s interface to host PC) Real-time execution MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 2.0 volts (2.0v to 6.0v range) Diagnostic LEDs (power, busy, error) Read/write program and data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-Go The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). Universal Programmer Seat Description: Instructions for use: Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position. The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions) The seat supports the following programming microcontroller: PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX) Views: 3

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module

Price: 550 Seller Type: An Individual Condition: New "This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LEDâ??s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module" Call me at: .

Product Description This product is a 1-channel opto-isolated relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V. Features Imported high quality double sided compact PCB. Opto-Isolated input This relay module is 5V active low. It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipment with large current. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use. Widely used for all MCU control, industrial sector, PLC control, smart home control. Technical Specifications TTL Control Signal: 5V-12V Relay Voltage: 5V Channels: 1 channel Optical Isolation: Yes Power supply indicator LED Control indicator LED Item size: approx. (L,W,H) cm Item weight: 14.5g

Product Description This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V. Features Imported high quality double sided compact PCB. Opto-Isolated inputs, means your digital electronics is safe and noise free. This relay module is 5V active low. It is an 2-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipment with large current. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Red working status indicator lights are conducive to the safe use. Widely used for all MCU control, industrial sector, PLC control, smart home control. Technical Specifications Working voltage: 5V Channel: 2 channel Item size: approx. cm / in Item weight: 29g / 1.01oz Package weight: 32g / 1.12oz

Product Description This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V. Features Imported high quality double sided compact PCB. Non Opto-Isolated input This relay module is 5V active low. It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipment with large current. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use. Widely used for all MCU control, industrial sector, PLC control, smart home control. Technical Specifications Working voltage: 5V Channel: 1 channel Item size: approx. (L,W,H) cm Item weight: 14.5g

2.4 inch TFT LCD module with touch screen controller and a SD card cage. It is suitable for embedded systems which require display high quality colorful image or video with interactive control and storage purpose. Features: SSD1289 touch panel controller. 3.3v voltage regulator PCB adapter for LCK One Standard SD card socket Support 16 bit RGB565 format, can connect any 16 bit data bus. 2×20 Pin 2.54mm double row pin header interface for connecting MCU. Can be driven by 8051 / AVR / PIC and other low power controllers. Display content: 240RGB x 320 Dots. Resolution: 240 x 320 Dots. Screen: 262K Colors. Size: Approx. 72 x 55cm (L*W) Package Includes: New 2.4 inch TFT LCD module Display with touch panel SD card 240×320 bardi zabardast hay Arduino kay liay. Microcontroller PIC kay sath bhi interface kea jaa sakta hay. Views: 10

PICkit 3 Features USB (Full speed 12 Mbits/s interface to host PC) Real-time execution MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 2.0 volts (2.0v to 6.0v range) Diagnostic LEDs (power, busy, error) Read/write program and data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-Go The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).

Brand: Accessories & Gadgets Price: 3620 Seller Type: An Individual Condition: New PICkit 3 Features USB (Full speed 12 Mbits/s interface to host PC) Real-time execution MPLAB IDE compatible (free copy included) Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 2.0 volts (2.0v to 6.0v range) Diagnostic LEDs (power, busy, error) Read/write program and data memory of microcontroller Erase of program memory space with verification Freeze-peripherals at breakpoint Program up to 512K byte flash with the Programmer-to-Go The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). Pakcage List: 1x PICKIT3 1x USB cable 1x 6pin cable 1x CD For details, call us or please visit our web-site.