Microcontroller ic

PIC16F877 features 256 bytes of EEPROM data memory, self programming, an ICD, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 additional timers, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications. Views: 4

PIC16F877 features 256 bytes of EEPROM data memory, self programming, an ICD, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 additional timers, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications. Views: 9

Microcontroller Programmer With New Feature Auto IC Detection Now Buy Online Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 w w w.matrixelectronic. com Email sales matrixelectronic. com Email info matrixelectronic. com PICKIT 2 PICKIT 2 MICROCONTROLLER PROGRAMMER IS A COMPLETE DEVELOPMENT SYSTEM IN A BOX, PROVIDING PROGRAMMING, EVALUATION AND DEVELOPMENT IN ONE SIMPLE DESIGN. THE PICKIT 2 TAKES ADVANTAGE OF MICROCHIPS FULL-SPEED USB DEVICE TO SPEED UP DEVELOPMENT PROGRAMMING. Box Pack

Product Description This 16×2 character LCD module only uses 2 wire I2C interface. The I2C Interface Board is basically an IO expander board that helps minimize microcontroller / Arduino IO usage pin count. With this module, attached to the back of 16×2 character LCD Module, you can use only two pins (SDA and SCL) to write to LCD module. The typical operating voltage for these display modules is 5.0V. (The i2c backpack module can also be purchased separately. Please following this link) Technical Specifications Gross Weight (kg): Connection: Pin Header Display Format: 16×2 Character Outline Dimension: 80.0(W)x36.0(H)x11.5(T)mm Visual Area: mm Active Area: mm Character Size: mm Dot (Pixel) Size: mm Dot Pitch: mm IC Package: COB IC or Equivalent: AIP, HD, KS, SPLC780, ST Interface -bit Parallel, -bit Parallel Display Type: STN-LCD Blue Viewing Direction: 6:00 Appearance: White on Blue Backlight Color: White Color Backlight Current (Typ) 15mA Power Supply(Typ) 5V Supply Current for LCM (Max) uA Operating Temp -℃ Storage Temperature -℃

Price: Seller Type: An Individual Condition: Used Hardware & Electrical Specifications: Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic.. Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, CSP, SCSP,... PC interface: USB2.0 Stand-alone Feature: None. Electrical spec. of the AC adapter: AC input 90V to 250V, Hz, DC output 12V/2A; power:15W Mechanical parameter: Main unit: Size: mm Weight: -Kg. Packing Box: Size mm Weight: 1.8 Kg. Features: Support devices with Vcc from 1.2V to 5V. Extremely fast speed. Built with 48 universal pin-drivers. PC hosted mode and stand-alone mode. Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip. ISP/ICP programming capability available via ISP/ICP adaptor. Only IC manufacturer approved programming algorithms are used for high reliability. (5%~-5%) and (%) Vcc verification enhances programming reliability. Advanced and powerful functions. Production mode start chip operation at the moment the chip is inserted in the socket properly. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one touch step. Password can be set for project files and production volume control Batch command combines device operations like program, verify, security into a single command at any sequence. Serial numbers generators are available as standard or customer-specific functions. Log file is useful for quality tracking. Over-current and over-voltage protection for safety of the chip and programmer hardware. WINDOWS XP/Vista compatibility Contact: Auto EFI electronics Tariq Shahzad skype: tarryq Contact: -

The KK2 is next big evolution of the first generation KK flight control boards. The KK2 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built-in software make install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts! The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for onboard soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board. The KK2 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labelled and the voltage sense line colour has been changed to red for easy identification, making installation and connections a snap. If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy. Specifications: Size: 50.5mm x 50.5mm x 12mm Weight: 21 gram (Include Piezo buzzer) IC: Atmega644 PA Gyro/Acc: 6050MPU InvenSense Inc. Auto-level: Yes Input Voltage: 4.8-6.0V AVR interface: standard 6 pin. Signal from Receiver: 1520us (5 channels) Signal to ESC: 1520us Firmware Version: 1.6+ Built-in aeroplane mode: Dualcopter Tricopter Y6 Quadcopter + Quadcopter X Hexacopter + Hexacopter X Octocopter + Octocopter X X8 + X8 X H8 H6 V8 V6 Aero 1S Aileron Aero 2S Aileron Flying Wing Singlecopter 2M 2S Singlecopter 1M 4S Views: 3

The KK2 is next big evolution of the first generation KK flight control boards. The KK2 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built-in software make install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts! The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for onboard soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board. The KK2 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labelled and the voltage sense line colour has been changed to red for easy identification, making installation and connections a snap. If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy. Specifications: Size: 50.5mm x 50.5mm x 12mm Weight: 21 gram (Include Piezo buzzer) IC: Atmega644 PA Gyro/Acc: 6050MPU InvenSense Inc. Auto-level: Yes Input Voltage: 4.8-6.0V AVR interface: standard 6 pin. Signal from Receiver: 1520us (5 channels) Signal to ESC: 1520us Firmware Version: 1.6+ Built-in aeroplane mode: Dualcopter Tricopter Y6 Quadcopter + Quadcopter X Hexacopter + Hexacopter X Octocopter + Octocopter X X8 + X8 X H8 H6 V8 V6 Aero 1S Aileron Aero 2S Aileron Flying Wing Singlecopter 2M 2S Singlecopter 1M 4S Views: 1