Microcontroller projects
Top sales list microcontroller projects
Rawalpindi (Punjab)
Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – Two 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable gain at 1x, 10x or 200x – Byte-oriented Two-wire Serial Interface – Two Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP • Operating Voltages – V for ATmegaP • Speed Grades – 0 - 4 MHz @ V – 0 - 10 MHz @ V – 0 - 20 MHz @ V • Power Consumption at 1 MHz, 1.8V, 25°C – Active: 0.4 mA – Power-down Mode: 0. 1 µA – Power-save Mode: 0.7 µA (Including 32 kHz RTC) Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.000
See product
Rawalpindi (Punjab)
Arduino Due Specifications Microcontroller: AT91SAM3X8E Operating voltage: 3.3V Recommended input voltage: 7-12V Input voltage limits: 6-20V Digital I/O pins: 54 (of which 12 provide PWM output) Analog input pins: 12 Analog outputs pins: 2 (DAC) Total DC output current on all I/O lines: 130mA DC current for 3.3V pin: 800mA DC current for 5V pin: 800mA Flash memory: 512KB all available for the user applications SRAM: 96KB (two banks: 64KB and 32KB) DataFlash: 2Mb (250KB) Clock speed: 84MHz Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 3.000
See product
Rawalpindi (Punjab)
• Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – Two 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable gain at 1x, 10x or 200x – Byte-oriented Two-wire Serial Interface – Two Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP • Operating Voltages – 1.8 - 5.5V for ATmega1284P • Speed Grades – 0 - 4 MHz @ 1.8 - 5.5V – 0 - 10 MHz @ 2.7 - 5.5V – 0 - 20 MHz @ 4.5 - 5.5V • Power Consumption at 1 MHz, 1.8V, 25°C – Active: 0.4 mA – Power-down Mode: 0. 1 µA – Power-save Mode: 0.7 µA (Including 32 kHz RTC) Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.000
See product
Rawalpindi (Punjab)
Arduino Due Specifications Microcontroller: AT91SAM3X8E Operating voltage: 3.3V Recommended input voltage: 7-12V Input voltage limits: 6-20V Digital I/O pins: 54 (of which 12 provide PWM output) Analog input pins: 12 Analog outputs pins: 2 (DAC) Total DC output current on all I/O lines: 130mA DC current for 3.3V pin: 800mA DC current for 5V pin: 800mA Flash memory: 512KB all available for the user applications SRAM: 96KB (two banks: 64KB and 32KB) DataFlash: 2Mb (250KB) Clock speed: 84MHz Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 3.000
See product
Rawalpindi (Punjab)
Features • Compatible with MCS®-51 Products • 20K Bytes of Reprogrammable Flash Memory • Endurance: Write/Erase Cycles • 4V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes • Interrupt Recovery from Power-down Mode • Hardware Watchdog Timer • Dual Data Pointer • Power-off Flag • Green (Pb/Halide-free) Packaging Option Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 460
See product
Rawalpindi (Punjab)
Manufacturer: NXP Core: ARM Cortex M0 Processor Series: LPC111x Data Bus Width: 32 bit Maximum Clock Frequency: 50 MHz Program Memory Size: 32 KB Data RAM Size: 4 KB On-Chip ADC: Yes Operating Supply Voltage: 1.8 V to 3.6 V Operating Temperature Range: - 40 C to + 85 C Package / Case: DIP-28 Mounting Style: Through Hole Program Memory Type: Flash Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 750
See product
Rawalpindi (Punjab)
Manufacturer: NXP Product Category: Microcontrollers (MCU) Core: ARM Cortex M0 Processor Series: LPC11 Data Bus Width: 32 bit Program Memory Size: 32 KB Data RAM Size: 8 KB On-Chip ADC: Yes Operating Supply Voltage: 1.8 V to 3.6 V Package / Case: HVQFN-33 Mounting Style: SMD/SMT Interface Type: I2C, SPI, UART Maximum Operating Temperature: + 85 C Minimum Operating Temperature: - 40 C Number of Programmable I/Os: 28 Program Memory Type: Flash Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 350
See product
Rawalpindi (Punjab)
Features • Compatible with MCS®51 Products • 4K Bytes of Reprogrammable Flash Memory – Endurance: Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial UART Channel • Direct LED Drive Outputs • On-chip Analog Comparator • Low-power Idle and Power-down Modes • Brown-out Detection • Power-On Reset (POR) • Green (Pb/Halide-free/RoHS Compliant) Packaging Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 260
See product
Rawalpindi (Punjab)
Features • Compatible with MCS®-51 Products • 20K Bytes of Reprogrammable Flash Memory • Endurance: 10,000 Write/Erase Cycles • 4V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes • Interrupt Recovery from Power-down Mode • Hardware Watchdog Timer • Dual Data Pointer • Power-off Flag • Green (Pb/Halide-free) Packaging Option Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 460
See product
Rawalpindi (Punjab)
Features • Compatible with MCS®51 Products • 4K Bytes of Reprogrammable Flash Memory – Endurance: 10,000 Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial UART Channel • Direct LED Drive Outputs • On-chip Analog Comparator • Low-power Idle and Power-down Modes • Brown-out Detection • Power-On Reset (POR) • Green (Pb/Halide-free/RoHS Compliant) Packaging Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 260
See product
Rawalpindi (Punjab)
Manufacturer: NXP Core: ARM Cortex M0 Processor Series: LPC111x Data Bus Width: 32 bit Maximum Clock Frequency: 50 MHz Program Memory Size: 32 KB Data RAM Size: 4 KB On-Chip ADC: Yes Operating Supply Voltage: 1.8 V to 3.6 V Operating Temperature Range: - 40 C to + 85 C Package / Case: DIP-28 Mounting Style: Through Hole Program Memory Type: Flash Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 750
See product
Rawalpindi (Punjab)
Manufacturer: NXP Product Category: Microcontrollers (MCU) Core: ARM Cortex M0 Processor Series: LPC11 Data Bus Width: 32 bit Program Memory Size: 32 KB Data RAM Size: 8 KB On-Chip ADC: Yes Operating Supply Voltage: 1.8 V to 3.6 V Package / Case: HVQFN-33 Mounting Style: SMD/SMT Interface Type: I2C, SPI, UART Maximum Operating Temperature: + 85 C Minimum Operating Temperature: - 40 C Number of Programmable I/Os: 28 Program Memory Type: Flash Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 350
See product
Rawalpindi (Punjab)
STM32L100RCT6 microcontroller featuring 256 KB of Flash memory, 16 KB of RAM in an LQFP64 package On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) Board power supply: through USB bus or from an external 5 V supply voltage External application power supply: 3 V and 5 V Four LEDs: LD1 (red) for 3.3 V power on LD2 (red/green) for USB communication LD3 (green) for PC9 output LD4 (blue) for PC8 output Two push buttons (user and reset) Extension header for all LQFP64 I/Os for quick connection to prototyping board and easy probing Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.200
See product
Rawalpindi (Punjab)
Discovery Kit Features STM32F100RBT6B microcontroller 128K Program memory Self powered by USB cable between PC and STM32 Value line Discovery Can supply target application with 5 V and 3 V On-board ST-Link with USB interface for programming and debugging, selection mode switch to use the kit as a standalone ST-Link (with SWD connector) Extension header for all QFP64 I/Os Large number of free, downloadable ready-to-use software examples Discovery Kit Benefits Discover STM32 with STM32 Value line, including 128-Kbyte Flash, 8-Kbyte RAM in a 64-pin LQFP Immediate plug-and-play demonstration Adapts the demo to the future application environment Non-intrusive debug with the in-circuit debugger present on STM32 Value line Discovery. The kit can be used as an ST-link for your own board. Ideal for prototyping and easy probing. Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.600
See product
Rawalpindi (Punjab)
eatures • STM32F429ZIT6 microcontroller featuring 2 MB of Flash memory, 256 KB of RAM in an LQFP144 package • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone • ST-LINK/V2 (with SWD connector for programming and debugging) • Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage • 2.4" QVGA TFT LCD • SDRAM 64 Mbits • L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope • Six LEDs: – LD1 (red/green) for USB communication – LD2 (red) for 3.3 V power-on – Two user LEDs: LD3 (green), LD4 (red) – Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current) • Two pushbuttons (user and reset) • USB OTG with micro-AB connector • Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 5.000
See product
Rawalpindi (Punjab)
JOLTAIO WIFI DEVELOPMENT BOARD is esp8266 based multi zone controlling plug and play smart Wi-Fi board.This board can control electrical appliances and devices from smart phone even from another city. You may be a researcher, student, hobbyist or business man; this development board will provide you WIFI based smart control for rapid development of smart home, intelligent lighting, hotel multi-room control, smart industrial system, engineering projects and products. Features:- Multi devices controller Open-source Programmable by Arduino IDE 10 IN/OUT pins, analog, I^2C and SPI pins to control any external device or circuitry No need of external breadboard Includes all the features of ESP8266 Quick communication with JOLTAIO Wi-Fi DEVELOPMENT BOARD APP Supported by JOLTAIO WIFI SENSOR MODULES SERIES (35 WIFI modules) Timer control Custom setting Online support, guideline and tutorial with demos 10 LED’s for On Board testing purpose. Low cost & simple No need of External Microcontroller Efficient and cost effective plug and play solution for wifi Automation Website http://www.joltaio.com
See product
Rawalpindi (Punjab)
JOLTAIO WIFI DEVELOPMENT BOARD is esp8266 based multi zone controlling plug and play smart Wi-Fi board.This board can control electrical appliances and devices from smart phone even from another city. You may be a researcher, student, hobbyist or business man; this development board will provide you WIFI based smart control for rapid development of smart home, intelligent lighting, hotel multi-room control, smart industrial system, engineering projects and products. Features:- Multi devices controller Open-source Programmable by Arduino IDE 10 IN/OUT pins, analog, I^2C and SPI pins to control any external device or circuitry No need of external breadboard Includes all the features of ESP8266 Quick communication with JOLTAIO Wi-Fi DEVELOPMENT BOARD APP Supported by JOLTAIO WIFI SENSOR MODULES SERIES (35 WIFI modules) Timer control Custom setting Online support, guideline and tutorial with demos 10 LED’s for On Board testing purpose. Low cost & simple No need of External Microcontroller Efficient and cost effective plug and play solution for wifi Automation
See product
Rawalpindi (Punjab)
eatures • STM32F429ZIT6 microcontroller featuring 2 MB of Flash memory, 256 KB of RAM in an LQFP144 package • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone • ST-LINK/V2 (with SWD connector for programming and debugging) • Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage • 2.4" QVGA TFT LCD • SDRAM 64 Mbits • L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope • Six LEDs: – LD1 (red/green) for USB communication – LD2 (red) for 3.3 V power-on – Two user LEDs: LD3 (green), LD4 (red) – Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current) • Two pushbuttons (user and reset) • USB OTG with micro-AB connector • Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 5.000
See product
Rawalpindi (Punjab)
Discovery Kit Features STM32F100RBT6B microcontroller 128K Program memory Self powered by USB cable between PC and STM32 Value line Discovery Can supply target application with 5 V and 3 V On-board ST-Link with USB interface for programming and debugging, selection mode switch to use the kit as a standalone ST-Link (with SWD connector) Extension header for all QFP64 I/Os Large number of free, downloadable ready-to-use software examples Discovery Kit Benefits Discover STM32 with STM32 Value line, including 128-Kbyte Flash, 8-Kbyte RAM in a 64-pin LQFP Immediate plug-and-play demonstration Adapts the demo to the future application environment Non-intrusive debug with the in-circuit debugger present on STM32 Value line Discovery. The kit can be used as an ST-link for your own board. Ideal for prototyping and easy probing. Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.600
See product
Rawalpindi (Punjab)
STM32L100RCT6 microcontroller featuring 256 KB of Flash memory, 16 KB of RAM in an LQFP64 package On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) Board power supply: through USB bus or from an external 5 V supply voltage External application power supply: 3 V and 5 V Four LEDs: LD1 (red) for 3.3 V power on LD2 (red/green) for USB communication LD3 (green) for PC9 output LD4 (blue) for PC8 output Two push buttons (user and reset) Extension header for all LQFP64 I/Os for quick connection to prototyping board and easy probing Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D
Rs 2.200
See product
Visit our blog
Share on Facebook
Share on Twitter