Microcontroller serial

Product Description Description HC-06 wireless Bluetooth serial pass through transceiver module can be used for replacing RS232 cable between a microcontroller and PC. The module also can be used for connecting the Cell Phones with Bluetooth Peripheral to Embedded Boards or Machines using standard Bluetooth SPP Profile. Usage Default serial port setting: , N, 8, 1 Pairing code: Running in slave role: Pair with BT dongle and master module Applications Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices GPS receiver Industrial control MCU projects Pinout KEY: according to the data sheet, pull-up this pin while power-on-reset of the module to enforce AT mode. VCC is indicated in the range of 3.6V-6V. GND: Ground TXD: serial output of the module, to be connected to RX of the microcontroller. Note that this signal is using 3.3V logic level RXD: serial input of the module, to be connected to the TX of the microcontroller. Note that this signal is using 3.3V logic levels. STATE: connected to LED2 (Pin32) of the module, Related Information: Supported Android Apps The HC-06 although supports several android applications but following is a list of applications that were tested to work with this module: microController Arduino Bluetooth Please visit our website for more details.

Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – Two 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable gain at 1x, 10x or 200x – Byte-oriented Two-wire Serial Interface – Two Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP • Operating Voltages – V for ATmegaP • Speed Grades – 0 - 4 MHz @ V – 0 - 10 MHz @ V – 0 - 20 MHz @ V • Power Consumption at 1 MHz, 1.8V, 25°C – Active: 0.4 mA – Power-down Mode: 0. 1 µA – Power-save Mode: 0.7 µA (Including 32 kHz RTC) Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU datasheet. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins of which 12 can be used as PWM outputs, 12 analog inputs, 4 UARTs hardware serial ports, a 84 MHz clock, an USB OTG capable connection, 2 DAC digital to analog, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU datasheet. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins of which 12 can be used as PWM outputs, 12 analog inputs, 4 UARTs hardware serial ports, a 84 MHz clock, an USB OTG capable connection, 2 DAC digital to analog, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button." Facebook page;ElectronicsArena.com

salam I am offering PIC Microcontroller Course. This course is the ideal introduction for students of engineering & technicians of DAE. We'll teach you Microcontroller with; Interfacing a Seven segment Interfacing an LCD Interfacing Sensors Flashing LEDs Serial Communication with Computer Relays & driving motor Course duration 6 to 8 weeks Course fee is Full Hardware Training Contact for more details Engineer Yasir

Netduino is an open source electronics platform using the.NET Micro Framework. Featuring a 32-bit microcontroller and a rich development environment. Suitable for engineers and hobbyists alike. Input! Output! Interface with switches, sensors, LEDs, serial devices, and more. Netduino offers 20 GPIOs combined with SPI, I2C, 2 UARTs (1 RTS/CTS), 4 PWM channels and 6 ADC channels. Code! Debug! Repeat!.NET Micro Framework combines the ease of high-level coding and the raw features of microcontrollers. Enjoy event-based programming, multi-threading, line-by-line debugging, breakpoints and more. To get a glimpse of how its done, check out the basic 'getting started' guide You can even now use the Netduino on Linux & Mac computer using open source Mono instead of.NET And its very expandable just like the Arduino! 3rd-party accessories offer pre-built functionality like GPS location, servo control and battery power. Netduino is also pin-compatible with Arduino shields. 3rd-party drivers are required for some Arduino shields. Design files included. Netduino is an open source electronics platform. All design files and source code are included. Learn from the designs. Remix, and enjoy the freedom of open source. Box Open - Never Used - No Warranty

Lower Price Smaller size (8 pin chip vs 16 pin chip on a breakout board) 6 I/O Pins(3 Analog + 2 Digital + 1 Reset) vs 20 I/O Pins (6 Analog + 14 Digital) 8KB flash memory vs 32KB flash memory (ATtiny can hold smaller programs) 512 bytes of RAM vs 2KB of RAM (ATtiny can store less data) The ATtiny has no hardware serial port or I2C port (Wire library), making communication trickier. (There are workarounds, like the SoftwareSerial library or the TinyWire library which are less robust and flexible.) External Crystal vs Crystal on Arduino UNO board Core Processor: AVR Core Size: 8-Bit Max Clock Frequency: 20MHz Connectivity: Universal Serial Interface Extra Features: Brown-out Detect/Reset, POR, PWM, WDT Number of I /O: 6 Program Memory Size: 8KB (4K x 16) Program Memory Type: FLASH EEPROM Size: 512 x 8 RAM Size: 512 x 8 Operating Supply Voltage: 2.7 V - 5.5 V Data Converters: A/D 4x10b Oscillator Type: Internal Operating Temperature: -40°C ~ 85°C IC Package: 8-DIP Other types of programmers and IC are also available on our web with delivery to any city in Pakistan. Website http://electronicspanga.com

Features • Compatible with MCS®-51 Products • 20K Bytes of Reprogrammable Flash Memory • Endurance: Write/Erase Cycles • 4V to 5.5V Operating Range • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes • Interrupt Recovery from Power-down Mode • Hardware Watchdog Timer • Dual Data Pointer • Power-off Flag • Green (Pb/Halide-free) Packaging Option Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

Features • Compatible with MCS®51 Products • 4K Bytes of Reprogrammable Flash Memory – Endurance: Write/Erase Cycles • 2.7V to 6V Operating Range • Fully Static Operation: 0 Hz to 24 MHz • Two-level Program Memory Lock • 128 x 8-bit Internal RAM • 15 Programmable I/O Lines • Two 16-bit Timer/Counters • Six Interrupt Sources • Programmable Serial UART Channel • Direct LED Drive Outputs • On-chip Analog Comparator • Low-power Idle and Power-down Modes • Brown-out Detection • Power-On Reset (POR) • Green (Pb/Halide-free/RoHS Compliant) Packaging Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

Features Compatible with MCS-51 Products 8K Bytes of In-System Reprogrammable Flash Memory Endurance WriteErase Cycles Fully Static Operation 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-bit Internal RAM 32 Programmable IO Lines Three 16-bit TimerCounters Eight Interrupt Sources Programmable Serial Channel Low-power Idle and Power-down Modes Description The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8K bytes of Flash programmable and erasable read only memory PEROM. The device is manufactured using Atmels high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 and 80C52 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By Box Pack - No Warranty

Features Compatible with MCS-51 Products 8K Bytes of In-System Reprogrammable Flash Memory Endurance WriteErase Cycles Fully Static Operation 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-bit Internal RAM 32 Programmable IO Lines Three 16-bit TimerCounters Eight Interrupt Sources Programmable Serial Channel Low-power Idle and Power-down Modes Description The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8K bytes of Flash programmable and erasable read only memory PEROM. The device is manufactured using Atmels high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 and 80C52 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputer which provides a highly-flexible and cost- Box Pack - No Warranty

Features Compatible with MCS-51 Products 8K Bytes of In-System Reprogrammable Flash Memory Endurance 1,000 WriteErase Cycles Fully Static Operation 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-bit Internal RAM 32 Programmable IO Lines Three 16-bit TimerCounters Eight Interrupt Sources Programmable Serial Channel Low-power Idle and Power-down Modes Description The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8K bytes of Flash programmable and erasable read only memory PEROM. The device is manufactured using Atmels high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 and 80C52 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputer which provides

IMPORTED FROM SINGAPORE Key Features ARM® 32-bit Cortex® -M3 CPU Core 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division Memories 64 or 128 Kbytes of Flash memory 20 Kbytes of SRAM Clock, reset and supply management 2.0 to 3.6 V application supply and I/Os POR, PDR, and programmable voltage detector (PVD) 4-to-16 MHz crystal oscillator Internal 8 MHz factory-trimmed RC Internal 40 kHz RC PLL for CPU clock 32 kHz oscillator for RTC with calibration Low-power Sleep, Stop and Standby modes VBAT supply for RTC and backup registers 2 x 12-bit, 1 μs A/D converters (up to 16 channels) Conversion range: 0 to 3.6 V Dual-sample and hold capability Temperature sensor DMA 7-channel DMA controller Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs Up to 80 fast I/O ports 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode Serial wire debug (SWD) & JTAG interfaces 7 timers Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 16-bit, motor control PWM timer with dead-time generation and emergency stop 2 watchdog timers (Independent and Window) SysTick timer 24-bit downcounter Up to 9 communication interfaces Up to 2 x I2 C interfaces (SMBus/PMBus) Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) Up to 2 SPIs (18 Mbit/s) CAN interface (2.0B Active) USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK®

Features • High-performance, Low-power AVR® 8-bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz • High Endurance Non-volatile Memory segments – 64K Bytes of In-System Self-programmable Flash program memory – 2K Bytes EEPROM – 4K Bytes Internal SRAM – Write/Erase cyles: Flash/ EEPROM(1)(3) – Data retention: 20 years at 85°C/100 years at 25°C(2)(3) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security • JTAG (IEEE std. Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable gain at 1x, 10x or 200x – Byte-oriented Two-wire Serial Interface – One Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF • Speed Grades – ATmega644V: 0 - 4MHz @ V, 0 - 10MHz @ V – ATmegaMHz @ V, 0 - 20MHz @ V • Power Consumption at 1 MHz, 3V, 25°C for – Active: 240 µA @ 1.8V, 1MHz – Power-down Mode: 0.1 µA @ 1.8V Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 4K Bytes of In-System Self-programmable Flash program memory – 256 Bytes EEPROM – 512 Bytes Internal SRAM – Write/Erase cyles: Flash/ EEPROM – Data retention: 20 years at 85°C/100 years at 25°C() – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel 10-bit ADC in TQFP and QFN/MLF package – 6-channel 10-bit ADC in PDIP Package – Programmable Serial USART – Master/Slave SPI Serial Interface – Byte-oriented 2-wire Serial Interface (Philips I2C compatible) – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – DebugWIRE On-Chip Debug System – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated Oscillator – External and Internal Interrupt Sources – Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby • I/O and Packages – 23 Programmable I/O Lines – 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF • Operating Voltage: – V for ATmega48V/88V/168V – V for ATmega • Temperature Range: – -40°C to 85°C • Speed Grade: – ATmega48V/88V/168V: 0 - 4 MHz @ V, 0 - 10 MHz @ V – ATmega MHz @ V, 0 - 20 MHz @ V • Low Power Consumption – Active Mode: 250 µA at 1 MHz, 1.8V 15 µA at 32 kHz, 1.8V (including Oscillator) – Power-down Mode: 0.1µA at 1.8V Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

product description the arduino uno is a microcontroller board based on the atmega328 datasheet. it has 14 digital input output pins of which 6 can be used as pwm outputs, 6 analog inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button. it contains everything needed to support the microcontroller simply connect it to a computer with a usb cable or power it with a ac to dc adapter or battery to get started. the uno differs from all preceding boards in that it does not use the ftdi usb to serial driver chip. instead, it features the atmega16u2 atmega8u2 up to version r2 programmed as a usb to serial converter." Box Pack - No Warranty

Overview The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button." Box Pack - No Warranty

Features • 8-bit Microcontroller Compatible with MCS ® 51 Products • Enhanced Architecture – Single Clock Cycle per Byte Fetch – Up to 20 MIPS Throughput at 20 MHz Clock Frequency – Fully Static Operation: 0 Hz to 20 MHz – On-chip 2-cycle Hardware Multiplier – 128 x 8 Internal RAM – 4-level Interrupt Priority • Nonvolatile Program Memory – 2K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: Minimum Write/Erase Cycles – Serial Interface for Program Downloading – 32-byte Fast Page Programming Mode – 64-byte User Signature Array – 2-level Program Memory Lock for Software Security • Peripheral Features – Two 16-bit Enhanced Timer/Counters – Enhanced UART with Automatic Address Recognition and Framing Error Detection (AT89LP214 Only) – Enhanced Master/Slave SPI with Double-buffered Send/Receive – Programmable Watchdog Timer with Software Reset – Analog Comparator with Selectable Interrupt and Debouncing – 8 General-purpose Interrupt Pins • Special Microcontroller Features – Two-wire On-chip Debug Interface – Brown-out Detection and Power-on Reset with Power-off Flag – Internal 8 MHz RC Oscillator – Low Power Idle and Power-down Modes – Interrupt Recovery from Power-down Mode • I/O and Packages – Up to 12 Programmable I/O Lines – Configurable I/O with Quasi-bidirectional, Input, Push-pull Output, and Open-drain Modes – 5V Tolerant I/O – 14-lead PDIP • Operating Conditions – 2.4V to 5.5V VCC Volt age Range – -40° C to 85°C Temperature Range Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

overview the arduino due is a microcontroller board based on the atmel sam3x8e arm cortex m3 cpu datasheet. it is the first arduino board based on a 32 bit arm core microcontroller. it has 54 digital input output pins of which 12 can be used as pwm outputs, 12 analog inputs, 4 uarts hardware serial ports, a 84 mhz clock, an usb otg capable connection, 2 dac digital to analog, 2 twi, a power jack, an spi header, a jtag header, a reset button and an erase button." Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6~​​6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. Box Open - Never Used - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. "

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3 3V LDO, input voltage: 3 6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3 3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc " Box Pack - No Warranty

SUPERRO 610p programmer SUPERRO 610p programmer Features: Fastest Cheapest Programmer: With ARM7 MCU it gives ultra-fast programming experience. Programs devices with Vcc as low as 1.2V Built-in 48 universal pin drivers CE and ROHS Compliant Detailed Features: Supports IC devices from 169 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 64Mb EEPROM in 43 seconds. Built with 48 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages. The programmer operates in either PC hosted mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (%) enhances programming reliability. Provides over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows 7 & Vista & XP bit Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip insertion in Production Mode. The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. The Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. A Log file provides quality tracking. SUPERRO 610p programmer Speed Comparison Device Program + Verify (Sec) Compare with SPU Type AT28C64B 0.8(P)+0.1(V)= 0.9(s) 1.2(P)+0.8(V)= 2.0(s) 64Kb EEPROM 24AA(P)+1.8(V)= 4.5(s) 5.0(P)+4.0(V)= 9.0(s) 128Kb EEPROM QB25F640S33B(P)+14.4(V)= 43.4(s) 55.2(P)+41.4(V)= 96.6(s) 64Mb EEPROM AT89C55WD 2.5(P)+0.4(V)= 2.9(s) 3.3(P)+1.0(V)= 4.3(s) 20KB FLASH MCU S25FL064A 43.9(P)+14.7(V)= 58.6(s) 72.8(P)+41.4(V)= (s) 64Mb SPI EEPROM PIC16F876A 10.1(P)+0.8(V)= 10.9(s) 22.1(P)+06.2(V)= 28.3(s) PIC18F(P)+1.1(V)= 6.2(s) 13.6(P)+06.7(V)=20.3(s) SUPERRO 610p programmer Device Updates XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. Warranty Support Standard 2 Years Warranty: Included with purchase of SuperPro 500P. Covers device update and repair. Xeltek pays Fedex GND when shipping product back to customer for US only. It doesn't apply for international customers. Programmer is warranted to be free of manufacturing or workmanship defects for two years from the date of purchase. For technical support, you may use ticketing system, live chat or forum; you may also give us a call during our business hours Monday through Friday, from 8:00am to 4:30pm (PST). Hardware & Electrical Specifications Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,… PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 90V- 250V, Hz; DC Output: 12V/2A; power 15W Main unit: Dimensions 70mm (L) * 52mm (W) * 15mm (H) Weight 0.85 lbs (0.4Kg) Package: Dimensions 150mm (L) * 120mm (W) * 30mm (H) Weight 3 lbs (1.4Kg) Items Included SuperPro 610p Programmer with a DIP48 Adapter AC adapter Software CD Optional Accessories: Adapter in various packages USB 2.0 Interfaced, ultra-high speed economy universal device programmer

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage: 3.6 6v, unpaired current: about 30 ma, paired: about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance: 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just search and key passcode. running in slave role: pair with bt dongle and master module,simply establish connection between device with bluetooth function gps, pc,pda,psp phone,industrial control,etc. " Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage 3.66V, Unpaired current about 30 MA, Paired about 10 MA, input voltage cannt exceed 7V Interface level 3.3V, can be directly connected the various SCM 51, AVR, PIC, ARM, MSP430, etc., the microcontroller can also be directly connected without MAX232 Effective distance 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage 3.6 6v, unpaired current about 30 ma, paired about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just search and key Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage 3.6 6v, unpaired current about 30 ma, paired about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just s

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching. Connect to any microcontroller or system with TTL serial,..more detail given below For more detail about prducts please contact us on: Engr.Sajid Zaman Our Office address is: Office# FF-753, Deans Trade Center Peshawar Cantt. Our website also available please contact us for the website address through SMS. Thank you!