Worldcall antenna approx

Brand new best for PTCL evo 3G wingle charji cloud worldcall usb 3G 4g sim dongles. 24dBi powerful performance in weak coverage areas as u can see in screenshots. Feel free to contact and for more info call now

NRF24LGHz Antenna Wireless Transceiver Module Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in hardware CRC error detection, Multipoint communication address control Standard DIP Pitch Interface for embedded applications Low-power V, only 1uA on Power down mode Built-in 2.4GHz antenna Color: Black Size: Approx. 2.5 x 1.5 x 1cm (LxWxH) " Box Pack - No Warranty

NRF24L01 2.4GHz Antenna Wireless Transceiver Module Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Available software to set the address, only received local Address when output dataProvide interrupt instruction, can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in hardware CRC error detection, Multipoint communication address control Standard DIP Pitch Interface for embedded applications Low-power 1.9 - 3.6V, only 1uA on Power down mode Built-in 2.4GHz antenna Color Black Size Approx. 2.5 x 1.5 x 1cm LxWxH

Slightly used evo 24dbi antenna coverage strength approx 20 to 25kilometers from tower. with 50 ft wire and connector

Improves parking safety. Detection in all directions without dead angle. Minimize bumper damage. Totally built-in installation without impair overall appearance. Indicates object distance with different beeping frequencies. The sensor antenna activates 3 types of acoustic signals during approaching an obstacle at different distances. A continuous sound of Beep approximately between 0-0.3m A short interval sound of Beep approximately between m A long interval sound of Beep approximately between m Simple and concealed installation. The sensor antenna is entirely installed inside the bumper without any drilling work. Maintenance free, no cleaning or washing is required. Fit for any car, truck, RV or mini-van. Peel & Stick Antenna foil tape sensor for vehicles bumpers. Wires to Reverse Lamp (12 Volts DC) High output Piezo buzzer alert you with a beeping sound Detects object at 3 feet or less PD1 Rear parking sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker. When reverse gear is engaged the PD1 Rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones (Zones) alerting you of your proximity in relation to surrounding objects! The full length of your bumper (including the sides) is protected with an ever increasing beeping sound. As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first. Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound Installation: The Universal Parking Dynamics PD1 is compatible with any Car, Vehicle, Van, 4x4, MPV, SUV and Motor home that has a plastic bumper and as 99.9% of cars and vehicles have plastic bumpers, you have no need to be concerned, even if your bumper appears part metal the PD1 will work. If you are in any doubt please contact us. The PD1 antenna is easy to fit and requires no bumper adjustments or holes ensuring a damage free installation. The antenna is cost effective to replace should you wish to move the sensor to a new car in the future or simply require a replacement. Mounting the Electronic Control Unit (ECU): The Rear ECU can be installed in various locations such as inside of the boot behind the trim or inside your rear bumper with the included adhesive mount. The Front ECU can be installed inside of the engine bay or behind the glove box, dashboard or trim with the included adhesive mount. Mounting the Speaker: Mount the parking sensor speaker using the included adhesive mount. The volume is loud enough to provide a good warning even if mounted behind your vehicles interior trim. This connects to the ECU by push fit connection. Can be extended up to 15M and will mount in any location. Mounting the Antenna: Mount the adhesive metallic parking sensor antenna onto the inner side of the front and/or rear bumper (depending upon which sensor option you choose) making sure the bumper surface is clean before attaching. Ensure the terminal connector is on the side where you have located the ECU. When the antenna has been attached, covering the whole of the bumper from left to right (leaving approx 15cm from the edges); the excess length is cut off. Place a piece of the included adhesive material or tape at either end of the antenna to ensure a secure installation onto the bumper. Its recommended (but not essential) to cover antenna length with a black anti-rust protection paint that is applied to the underneath of a car chassis or similar to protect from the elements. It is important that the antenna is installed at the highest part from the ground that corresponds to the furthest distance from the vehicle body as a precaution to prevent any interference from nearby metal parts. The recommended position of the parking sensor antenna is at least 40cm from ground level, with 50cm being optimum. Once the bumper is removed, if your vehicle has a metal crash protection bar and the antenna will be within 3 cm's of this metal bar (once the bumper is re-fitted) you can install a 2nd Antenna (included with all PD1 sensors) to prevent any reduction in detection range or insulate the metal crash bar. Courier TO Any CIty Avalable Box Pack - No Warranty

Features:New antenna, SMA interface omnidirectional antenna.2.4G/5G dual-band wireless router / wireless network card antenna 5db SMA omnidirectional antenna.This antenna can be used for wireless routers and wireless network cards of the SMA interface.For ASUS wireless router RT-AC68U AC66U, dual-band wireless routing USB-AC56 high-end dual-frequency network card original antenna.Metal SMA antenna interface, internal pure copper antenna core, RG178 cable, reflects the superior performance of the antenna.Specification:Supported bands: 2.4 Ghz ~ 5.8 GhzGain: 5dBiRadiation: OmniInterface: RP-SMASuitable for wireless LAN and WiFi router adapter16cm fully extended and 14.5 cm foldedCompliant with IEEE 802.11a, 802.11b, 802.11g, 802.11n wireless LANs.Finish: Matte BlackSize: approx. 16.5 * 1.5 * 1cm / 6.5 * 0.59 * 0.39inPackage list:1 * Antenna

upports Evo,Nitro,Worldcall and DSL..backup upto 6 hours.,free home delivery,6 month warranty,Out of city delivery free via OCS.. Features Supports -bit WEP, complies with 128 bit WPA standard(TKIP/AES) Provides Bridge(AP/Client) mode Wireless speed up to 150Mbps when connected to 11n device Wireless security encryption easily at a push of ?WPS? button Seamlessly compatible with b and g devices Internal Antenna Range: Indoors up to 100 meters, Outdoors up to 300 meters power back up 4-6 Hours Supports LAN access control over internet connection Supports WDS wireless network extension Box Pack- Warranty: 6 Months

This 1watt Amplifier only 2 months used and works perfectly just because of wind up business because of partnership broken This Amplifier is Made ins Taiwan and import from UK General Specifications Operating Range MHz Operating Mode Bi-directional, Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode. Connectors N-Female Indicators TX and RX LEDs on both the amplifier and the DC power injector Lightning Protection Direct DC ground at antenna connector and in the DC injector DC Surge Protection 600 Watt TVS at 12 VDC input from transmission cable Transmit Amplifier Specifications Transmit Gain 25 dB Frequency Response +/-1 dB over operating range Max Transmit Output Power 1 Watt with 25 mW input at input Transmit Input Power 3.2 mW minimum, 100mW maximum Receiver Low Noise Amplifier Specifications Receive Gain 16 dB typical Frequency Response +/-1 dB over operating range Noise Figure 3.5 dB typical Environmental/Mechanical Specifications Temp. Range -20° C to +60° C Power 11 to 14VDC @ 900 ma peak 500 ma avg. Amplifier Dimensions 4.53” x 2.55” x 1.20” DC Power Injector Dimensions 4.42” x 2.40” x 1.22” Mounting Bracket For Amplifier Accommodates pole/mast diameters from 3/4” to 3” Kit Weight Approx. 1.5 lb. with U-bolts Condition: 9/10 - No Warranty

Plz CONTACT ME, MEET ME PERSONALLY. I am confident that you will not find price lower than this anywhere in Pakistan, for this ultra modern Quadcopter. It has camera stand, (this item do not include camera), but has frame to mount camera. Ideal for areal photography and video making. (it is on par with dji phantom). Spare parts like propellers, landing gears, frame cover etc... will be available. Description: Product Name: CX-20 Auto-Path Finder Size: (CM) Battery: Li-po battery Mah Flight Time: Approx 15 Minutes Radio Control Distance: 300meters Built in 5.8G Antenna GPS One Key Auto Pilot Return To Home and Land GPS Lost Signal Auto Pilot Return To Home and Land GPS One Key Altitude Height Position Hold IOC Head Lock Function Low Voltage Protection ATTRACTIVE AND HIGHLY INTEGRATED DESIGN A compact and highly integrated design means that it is easier for you to pack it into your backpack. The streamlined design brilliantly reflects the aesthetics of its futuristic design and the fantastic visual effects allows you to become the focus of the crowd. Moreover, you can mount a Go Pro or other light and handy cameras on your Auto-Path finder to shoot some footage from the air which will bring you a brand new flying experience. READY TO FLY DESIGN The hardware mounting and software tuning are all done prior to delivery. The Auto-Path finder is ready to fly the moment you unpack it, you just need to attach propellers, charge the Li-Po and install the transmitter batteries before use. REMOTE CONTROL UNIT Auto-Path finder contains a remote controller and receiver, which help the user to completely avoid the inconvenience of purchasing such things. The only thing you need to do is to add TX batteries (4x AA). The 2.4 G ISM frequency makes the effective control distance up to 1.5km. The frequency hopping anti-interference design allows multiple remote controllers to work at the same time, and provides a reliable remote communications link. STABLE, YET AGILE PERFORMANCE, EASY TO FLY Auto-Path finder has an integrated flight dynamics system, the MX + GPS multi-rotor autopilot system, as well as the dedicated remote controller and receiver. Flight parameters and functions have been set up before delivery, so you can fly your Auto-Path finder the moment you receive it. The proven stability of the MX autopilot system allows you to easily achieve great flight performance. TWO FLIGHT CONTROL MODES, INCLUDING POSITION HOLD With the built-in MX autopilot system plus a GPS module, the Auto-Pathfinder has GPS Attitude and Attitude Control Mode. Pilots can switch between the two modes to achieve a particular flight experience. INTELLIGENT ORIENTATION CONTROL (IOC) Auto-Path finder also has the Intelligent Orientation Control (IOC) function of the MX autopilot system. Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor FAIL SAFE & AUTO GO HOME/LANDING Auto-Path finder also has the fail safe function of the MX autopilot system. This means when the communication between the Mx Controller and the transmitter is disconnected, the out puts of all command sticks from controller will go to the centre position, the GPS system will automatically trigger Return To Home and will land safely.

"HI-TARGET" (China) Dual Frequency GNSS RTK System Model V30, with Pacific Crest (USA) Motherboard, Internal Memory 64 MB, RTK Accuracy 8mm + 1PPM, IP67, key features as follow Multi Constellation Tracking (220 Tracking Channels) Support GPS, GLONASS, GALILEO, BDS, SBAS NGS Approved GNSS Antenna Intelligent Operation Diversify RTK Application Long Battery Back up approx 15 hours Rugged & unique design Qmini MP Field Controller Controlled & Field Software Post Processing Software Accessories Included; o Base with Internal Radio o Rover with Internal Radio o Data Controller Getec o Field Software o Tripod for Base o Tribrach with adopter and optical plummet o Fiber Pole for Rover Warranty 2 Years