Rs232 db9

Supports all standard DB9 serial ports / connectors Fully shielded Molded connectors Thumbscrews Wires are stright-through Wire gauge: 28 AWG Length: 6 feet

USB TO SERIAL CONVERTER CALBE through the USB port with a different communication between communication devices, such as PC-PC, PC-digital cameras, PC-PDA. Development board. STC download. LED control card support, and also supports USB1.1 and USB2.0. HL340 is USB-serial converter chip, ideal design for connecting with the PC via and USB port closly! and no longer through the RS232 conversion, so that the PC and peripheral connections faster and concise. Mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. This series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. Support System: WIN. XP. WIN.WIN8. Vista, Box Pack - No Warranty

USB TO SERIAL CONVERTER CALBE through the USB port with a different communication between communication devices, such as PC-PC, PC-digital cameras, PC-PDA. Development board. STC download. LED control card support, and also supports USB1.1 and USB2.0. HL340 is USB-serial converter chip, ideal design for connecting with the PC via and USB port closly. and no longer through the RS232 conversion, so that the PC and peripheral connections faster and concise. Mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. This series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. Support System: WIN. XP. WIN.WIN8. Vista" Facebook page;ElectronicsArena.com

usb to serial converter calbe through the usb port with a different communication between communication devices, such as pc pc, pc digital cameras, pc pda. development board. stc download. led control card support, and also supports usb1.1 and usb2.0. hl340 is usb serial converter chip, ideal design for connecting with the pc via and usb port closly and no longer through the rs232 conversion, so that the pc and peripheral connections faster and concise. mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. this series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. support system: win. xp. win.win8. vista," Box Pack - No Warranty

DB9 male adapter, RS232 Serial DB9 9 pin to 9 Position Screw Terminal Block Connector.The signal line was all lead out, name and number clearly labeled.12-24AWG wire range, 5.08mm pitch, 2.5mm screw diameter, you need use the 2.5mm width slot screwdriver.All-copper DB9 Socket, anti-oxidation, contact better.

DESCRIPTION Compatibility: EIA/TIA RS232C standard and RS485/RS422 standard Interface RS232 side: DB9 female connector Interface RS485/RS422 side: DB9 male connector with optional (included) terminal board Transmission rate: 300 to 115,200bps Transmission distance: RS422 maximum 1200m, RS232 side maximum 5m Working modes: asynchronous, duplex, and differential transmission Working environment: 0 to 70°C Relative humidity: 5 to 95% Dimensions: 95 x 33 x 17mm Item Code: AS45 Other related products are also available, Delivery across all over Pakistan. Mention that you found this ad on DealMarkaz.pk when you call.

pecification:Cable Color: White / BlackConnector 1: 9 Pin DB9 MaleConnector 2: 9 Pin DB9 FemaleSerial FeMale to FeMale cable.DB9 Pin Extension Cable with great technology can satisfy your daily demand.High-fidelity design, anti-interference ability, to reduce transmission signal attenuation, have a good effect. RS232 (9-pin Female) Cable 100% Brand New and high quality. DB9 female connectors on each end Straight through (not a null modem cable) Most used digtal satellite receivers upgrading. Support the RS 232 serial interface

Cable Length:80cm Color:As the picture show Size:6.7 x 3.5 x 1.5cm USB specification 2.0 compliant. Support Rs232 serial interface DB9. Support over1 Mbps data transfer rate. SupportWindows 98/2000/XP/8/10 and Mac OS9.0/OSX/Linux Support remote wake-up and power management. Suitable for PDA and Modem. Available for USB port. Low power consumption Product Weight:60g/pcs

Connects Your Dish Receiver Connects Your Modems, Switches & Routers. Connect Your Serial Devices And Transfer Your Files Can be used for PC-PC File transfer Connects a nine-pin PC serial port to a serial device Enables serial products to connect together Designed to provide a reliable, long-lasting connection High quality shielding prevents EMI interference Molded connectors with strain relief Two DB9 female connectors

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

The TP-Link TL-R488T Load Balancing Router features four WAN ports, which allows four connections to the Internet at the same time, provides you with quad-bandwidth access, and gives you the ability to enjoy more Internet sources from different ISPs. With fail-over and automatic load balancing, no manual work should ever be required. Key Features Shares data and Internet access for Stations, connecting Internet through PPPoE on demand and disconnecting when idle Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Provides quad-bandwidth and supports Load Balancing Backups connections automatically for each other Specifies priority channels according to source or destination IP addresses, distributing flexibly Internet resource and services from different ISPs Built-in NAT and DHCP server supporting static IP address distributing Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering Supports Virtual Server, Special Application, and DMZ host Supports UPnP, Static Routing, VPN pass-through Supports connecting/disconnecting Internet on a specified time of day Supports access control based on time of day, parents and network administrators can establish restricted access policies for children or staff Supports Flow Statistics Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter Supports web-based firmware upgrade Supports Remote and Web management Desktop or rack-mountable steel case Quad-WAN for Multiple ISP Support The TP-Link TL-R488T features four WAN ports, which allow four connections to the Internet at the same time, provides you quadruple-bandwidth access, and gives the ability to enjoy more Internet sources from different ISPs. ISP server addresses can be added by hand and support direct introduction of text format of address table. Lines of the same ISP divert automatically. The internal automatic line diversion strategy can distribute data streams according to the bandwidth proportion and occupancy rate to raise the utilization rate of dual-line broadband. Enhanced Features & Intel IXP Processors The TP-Link TL-R488T incorporates the Intel IXP network range of processors, with a main frequency up to 533MHz and a multi-CPU distributed architecture to ensure high performance and high availability. The 6-layer PCB, the built-in high-redundancy power module features a new architecture that dramatically stretches the performance of the router and ensures a stable connection. Additionally, the TP-Link TL-R488T provides all normal settings of broadband router, it features much more advanced functions, such as Port Mirror, Port VLAN, UPnP, VPN Pass-through, Firewall and System Log. Easy to Use and Setup The TP-Link TL-R488T Load Balancing Router provides a friendly configuration interface for easy use. With multiple functions, high-reliability, and high-security, it is ideal for SMB (Small and Medium Business), Internet cafe, broadband community, and school network use. SPECIFICATIONS Software Specification Standards and Protocols IEEE u, z, ab, x, x, TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DNS Basic Function DHCP Server DHCP Client MAC Address Modify/Clone VPN Pass-through Static Routing Dynamic DNS QoS IP-Based QoS Port Bandwidth Control IP Connection Session Control IP Bandwidth Control Connection Session List Port Settings Flow Statistics LAN and WAN Port Setting Forwarding Rules Virtual Server Special Application Static Routing DMZ Host UPnP Firewall Function Firewall Rules Setting MAC Address Filtering Domain Name Filtering IP/MAC Address Binding Ignore Ping Packet From WAN Port DoS Protection Scan Protection IP Packets Containing Options Suspicious Package Detection System Function Remote Management System Log Configuration File Uploading and Downloading Web Upgrade HTTPS Configuration New Dual-WAN Function Flow Statistics WAN Load Balancing Bandwidth Occupancy WAN IP Tracing WAN Bandwidth Percentage Display LAN IP Statistics Detecting Online ICMP Detecting DNS Detecting TCP Connecting Test Hardware Specification Intel IXP Network Processor, Multi-CPU distributed processing, main frequency up to 533MHz Ports LAN M Auto-Negotiation RJ45 ports (Auto MDI/MDIX) WAN M Auto-Negotiation RJ45 ports (Auto MDI/MDIX) 1 Console (RS232 DB9 Male) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-¦¸ STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-¦¸ STP (maximum 100m) LED Indicators LAN/WAN Link/Act, 100Mbps Else Power, M1, M2 Dimensions(W*D*H) in.( mm) Environment Operating Temperature: ¨H~104¨H) Storage Temperature: -¨H~158¨H) Operating Humidity: % non-condensing Storage Humidity: 5%~90% non-condensing Power and Consumption Input: VAC; Hz Consumption: 4.1W (Max) Box Pack- Warranty: 8 Months

Standard Features • Open ACCESS™ design for easy media loading • 4.09”” print width • 203 dpi print resolution (8 dots/mm) • 4 ips maximum print speed • Direct Thermal (LP) and Direct Thermal/Thermal Transfer (TLP) printing of bar codes, text and graphics • EPL2 programming language and Line Mode support (LP only) • 512KB of flash memory • 128KB SRAM – enables printing of up to 11” long labels • Serial RS232 (DB9) and USB (V 1.1) OR Parallel (with Centronics connector) interfaces – configurable at time of order • Head-up sensor • Reflective and transmissive media sensing • Metal tear edge • 5” outside diameter media capability • Fan-fold media feed slot • 5 resident expandable bitmap fonts (USA, European) • Multiple DOS and Windows codepage support • Windows drivers • Printer utilities • Linear & 2-D bar code symbologies

5FT DB9 RS232 MALE TO MALE SERIAL CABLE M-M 5FT Connectors: DB9 Male to DB9 MaleFully shielded to prevent EMI/RFI interferenceAll lines wired straight throughLength: 5ft Available Ex-stock - Quantity 2 Pcs. Delivery anywhere in pakistan Payment upon delivery in Islamabad/Rawalpindi/Lahore. Price mentioned is per piece & net cash.. Box Open - Never Used - No Warranty

Supports RS232 serial interface DB9. Transmission rate up to 1Mbps. Plug Play. Supports remote wake-up mode and power management. Easily convert USB interface to standard RS232 interface.

PIC16F877 development board features: can be powerd by USB or 6-12V DC power 8 leds are provided.show I/O status 4*1 Independent buttons are provided 1 RS232 port communication for connection with PC or other devices with a DB9 connector 1 JTAG Port 1x PIC16F877or PIC16F877A Power Switch Reset Switch ICSP Program Emulator Interface All pins are taken out on IDC connectors to make them available for further connections. Box Open - Never Used - No Warranty

mPort Serial features RS232 serial connectivity through a standard DB9 serial port. Once a machine is connected through the serial interface, the mPort Serial can attach to the IP network using built-in WiFi or Ethernet. From there, a terminal screen can be launched through the mFi controller software to control the connected machine. The mPort Serial also features an external antenna connector to support longer range industrial applications. httpdreamsnw.commport-serial Avalaible at Dreams Network Technology Pvt Ltd. Contact LHR 04235784892 KHI 02134710763, 02134711677, 02134721416

mPort Serial features RS232 serial connectivity through a standard DB9 serial port. Once a machine is connected through the serial interface, the mPort Serial can attach to the IP network using built-in WiFi or Ethernet. From there, a terminal screen can be launched through the mFi controller software to control the connected machine. The mPort Serial also features an external antenna connector to support longer range industrial applications. http://dreamsnw.com/mport-serial Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)