Usb db9

usb to serial converter calbe through the usb port with a different communication between communication devices, such as pc pc, pc digital cameras, pc pda. development board. stc download. led control card support, and also supports usb1.1 and usb2.0. hl340 is usb serial converter chip, ideal design for connecting with the pc via and usb port closly and no longer through the rs232 conversion, so that the pc and peripheral connections faster and concise. mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. this series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. support system: win. xp. win.win8. vista," Box Pack - No Warranty

USB TO SERIAL CONVERTER CALBE through the USB port with a different communication between communication devices, such as PC-PC, PC-digital cameras, PC-PDA. Development board. STC download. LED control card support, and also supports USB1.1 and USB2.0. HL340 is USB-serial converter chip, ideal design for connecting with the PC via and USB port closly! and no longer through the RS232 conversion, so that the PC and peripheral connections faster and concise. Mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. This series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. Support System: WIN. XP. WIN.WIN8. Vista, Box Pack - No Warranty

USB TO SERIAL CONVERTER CALBE through the USB port with a different communication between communication devices, such as PC-PC, PC-digital cameras, PC-PDA. Development board. STC download. LED control card support, and also supports USB1.1 and USB2.0. HL340 is USB-serial converter chip, ideal design for connecting with the PC via and USB port closly. and no longer through the RS232 conversion, so that the PC and peripheral connections faster and concise. Mobile system and embedded systems ideal for its small package can embed any connectors and handheld devices. This series of chips at work and sleep modes have very low power consumption, ideal for bus powered occasions. Support System: WIN. XP. WIN.WIN8. Vista" Facebook page;ElectronicsArena.com

Cable Length:80cm Color:As the picture show Size:6.7 x 3.5 x 1.5cm USB specification 2.0 compliant. Support Rs232 serial interface DB9. Support over1 Mbps data transfer rate. SupportWindows 98/2000/XP/8/10 and Mac OS9.0/OSX/Linux Support remote wake-up and power management. Suitable for PDA and Modem. Available for USB port. Low power consumption Product Weight:60g/pcs

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

Package Contents: Package Type: Blister Dimension: 68 x 55 x 22 mm USB to Serial Adapter (DB9) x 1 USB Type A Male to Type B Cable x 1 CD-ROM (Driver and User Guide)

UPS Communications Cable Smart Signalling 6'/2m - DB9 to RJ45UPS Cables that provide dedicated connections between APC UPSs and desktops, workstations, and serversAPC Genuine UPS SMX SMT Series Serial Cable RS-232 to RJ-50 940-0625AGenuine APC 940-0625a UPS Serial to Rj45 Communication CableConnector A: RJ45 (10 Pins)Connector B: SUB-D 9 (Smart signaling)Net Weight: 0.14KGRoHS: CompliantCord Length: 2metersKey FeaturesUPS Communications Cable Smart Signalling 6'/2m - DB9 to RJ45UPS Cables that provide dedicated connections between APC UPSs and desktops, workstations, and serversAvailabilityExtension CableProvides availability and reliability to let your UPS send signals over longer distances.Communication Computer Interface CableUPS cable provides dedicated serial/USB communication between the UPS and the server, independent of the network.

1.8M 6 ft Cisco USB - RJ45 Console cable Connect from a USB port on your laptop directly to a Cisco console port. No adapters needed Fully capable of sending a break key sequence. Embedded FTDI chip Windows 7 and 8 will automatically install drivers, no need for additional drivers or install CDs no CD included. Drivers available for download for all versions of Windows including Windows 8, Mac OS, Linux, and Android. Connecting Point 1-CTS,2-DSR,3-RXD,4-GND,5-GND,6-TXD,7-DTR,8-RTS Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog3.5 Support FTDI VCP driver and D2XX driver upgrading for cisco DB9 RJ45 console cable

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Laptop Core 2 Duo Acer GHz, 2GB RAM, 250GB HDD, Super Drive, 15.4" LCD (For Sale) In Excellent working condition Key Features: Core 2 Duo 2.5GHz 2GB RAM 250GB HDD Super Drive 15.4 Inch LCD Interface: 1 x Speaker 1 x Headphone 1 x Mic 1 x SD/SDHC Card Slot 1 x VGA Port 1 x S-Video 1 x DVI-D 1 x IEEE Port 3 x USB Port 1 x RJ45 1 x RJ11 1 x DB9 Contact:

Features: Core 2 Duo 2.5GHz 2GB RAM 250GB HDD Super Drive 15.4 Inch LCD Interface: 1 x Speaker 1 x Headphone 1 x Mic 1 x SD/SDHC Card Slot 1 x VGA Port 1 x S-Video 1 x DVI-D 1 x IEEE Port 3 x USB Port 1 x RJ45 1 x RJ11 1 x DB9 Contact: Condition: - No Warranty

Compact all-in-one terminal with footprint no larger than a standard receipt printer Built-in 3” thermal printer Optional built-in MSR, smartcard reader, finger print sensor and RFID reader Intel Pineview D525 dual core CPU, 1.8GHz 12” LCD display with resistive touch 5 x USB, 3 x Serial (2 x DB9 + 1 x RJ45), 1 x CR, 1 x LAN, PS/2 & Paralle Box Pack- Warranty: 1 Year

PIC16F877 development board features: can be powerd by USB or 6-12V DC power 8 leds are provided.show I/O status 4*1 Independent buttons are provided 1 RS232 port communication for connection with PC or other devices with a DB9 connector 1 JTAG Port 1x PIC16F877or PIC16F877A Power Switch Reset Switch ICSP Program Emulator Interface All pins are taken out on IDC connectors to make them available for further connections. Box Open - Never Used - No Warranty

Laptop Core 2 Duo Acer GHz, 2GB RAM, 250GB HDD, Super Drive, 15.4LCD Key Features Core 2 Duo 2.5GHz 2GB RAM 250GB HDD Super Drive 15.4 Inch LCD Interface 1 x Speaker 1 x Headphone 1 x Mic 1 x SDSDHC Card Slot 1 x VGA Port 1 x S-Video 1 x DVI-D 1 x HDMI Port 3 x USB Port 1 x RJ45 1 x RJ11 1 x DB9 Pick upDelivery We can ship by cargo next day delivery. Please call for bank details upon verifying payment we will ship via a cargo for next day traceable delivery. Delivery charges you will pay at your end. Delivery Cost around Rs in case you are not in Lahore or you dont like to come to pick up the item. Condition: - No Warranty

Laptop Core 2 Duo Acer GHz, 2GB RAM, 160GB HDD, Super Drive, 15.4LCD Key Features Core 2 Duo 2.5GHz 2GB RAM 160GB HDD Super Drive 15.4 Inch LCD Interface 1 x Speaker 1 x Mic 1 x SDSDHC Card Slot 1 x VGA Port 1 x S-Video 1 x DVI-D 1 x HDMI Port 3 x USB Port 1 x RJ45 1 x RJ11 1 x DB9 1 x Headphone Pick upDelivery We can ship by cargo next day delivery. Please call for bank details upon verifying payment we will ship via a cargo for next day traceable delivery. Delivery charges you will pay at your end. Delivery Cost around Rs in case you are not in Lahore or you dont like to come to pick up the item. Condition: - No Warranty

Supports RS232 serial interface DB9. Transmission rate up to 1Mbps. Plug Play. Supports remote wake-up mode and power management. Easily convert USB interface to standard RS232 interface.

Standard Features • Open ACCESS™ design for easy media loading • 4.09”” print width • 203 dpi print resolution (8 dots/mm) • 4 ips maximum print speed • Direct Thermal (LP) and Direct Thermal/Thermal Transfer (TLP) printing of bar codes, text and graphics • EPL2 programming language and Line Mode support (LP only) • 512KB of flash memory • 128KB SRAM – enables printing of up to 11” long labels • Serial RS232 (DB9) and USB (V 1.1) OR Parallel (with Centronics connector) interfaces – configurable at time of order • Head-up sensor • Reflective and transmissive media sensing • Metal tear edge • 5” outside diameter media capability • Fan-fold media feed slot • 5 resident expandable bitmap fonts (USA, European) • Multiple DOS and Windows codepage support • Windows drivers • Printer utilities • Linear & 2-D bar code symbologies