Ohms distortion

HighlightsConditions • 2.0 channel sound • Superior output • Usb powered • Impressive outlook • 2.0 Channel Stereo Audio Supported • Uniquely designed speakers Specification: Power output: 300W (P.M.P.O) 3W x 2 (R.M.S) Frequency Response: 120Hz~20Khz Drive Unit: 2"x2 Impendence: 4 Ohms Distortion: 0.3%1W 1Khz Power Input: 5V/1A (USB) more detail visit www.mobilesalepoint.webs.com home delivery all pakistan with extra charges Box Pack- Warranty: 1 Year

FEATURES: Audionic Alien 2 crystal clear powerful audio for your home pc. 2.5 inch drive unit. audionic Alien 2 is the best choice for every computer as it is reliable, durable and cost effective. 3.5mm headphones jack Power Output:300W (P.M.P.O.)12W (R.M.S.) Frequency Response:180Hz ~ 20Khz Drive Unit: 3" x 2 Impedance: 4 Ohms Distortion: 0.3% 1W 1KHz S/n: >60dB Input Power: AC 220v/50Hz For more info visit www.w11stop.com cash on delivery is available in Pakistan

Audionic Alien 2 crystal clear powerful audio for your home pc. 2.5 inch drive unit. audionic Alien 2 is the best choice for every computer as it is reliable, durable and cost effective. 3.5mm headphones jack Power Output:300W (P.M.P.O.)12W (R.M.S.) Frequency Response:180Hz ~ 20Khz Drive Unit: 3" x 2 Impedance: 4 Ohms Distortion: 0.3% 1W 1KHz S/n: >60dB Input Power: AC 220v/50Hz Views: 237

Audionic Metallica Alien Sound Master Dubble Speaker Specifications: OutPut Power: 300W R.M.S: 12Watts (R.M.S) Drive Unit: 3" x 2 Impedence: 4 Ohms Distortion: 0.3% 1W 1KHz S/N:: 60db Input Power: AC 220V / 50Hz Views: 3

Audionic Metallica Alien Sound Master Specifications: OutPut Power: 300W R.M.S: 12Watts (R.M.S) Drive Unit: 3" x 2 Impedence: 4 Ohms Distortion: 0.3% 1W 1KHz S/N:: 60db Input Power: AC 220V / 50Hz Whatup 03142256028 and Call Views: 7

2 Portable Digital USB Mini Stereo Wired Speaker High Frequency: U-Smart speakers is supported with high OUTPUT RMS 2.5W+2.5W High Quality Its drive unite is about 2'' x 2 Impedance is about 4 Ohms, Distortion is about 0.3% 1W1KHz,

3D-Compatible: The HDMI v.1.4 connections will accept 3D video from your 3D-ready Blu-ray player and output the video signal in 3D to your 3D-ready HDTV. Double Bass: With the double bass feature you can boost the bass output by feeding the low frequency signals from the left and right channels (when front speakers set to large) to both the front speakers and to the subwoofer. WRAT (Wide Range Amplifier Technology): This technology uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. H.C.P.S. (High Current Power Supply): The Onkyo HT-R580 is equipped with a H.C.P.S. massive high power transformer. Digital-to-Analog Converters (DACs): This receiver is equipped with 192kHz/24-bit Burr-Brown DACs to decode and playback high-resolution recordings with less jitter and clearer sound. 32-Bit Processing DSP: The Onkyo AV receiver is equipped with a powerful and highly accurate 32-bit processing DSP (Digital Signal Processor) for better surround sound reproduction. Supported Audio Formats: The HT-R580 supports the following audio formats: 2-channel Linear PCM (32-192-kHz, 16/20/24-bit/) Multichannel Linear PCM (7.1-ch, 32-192-kHz, 16/20/24-bit) Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio) Dolby Pro Logic IIx Music Settings: While listening in the Dolby Pro Logic IIx Music format, there are three further enhancements you can adjust: Panorama: Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu. Dimension: Allows you to move the sound field forward or backward. Centre Width: Allows you to adjust the width of the centre channel. PLIIz Height Gain: The Height Gain Control in Dolby Pro Logic IIz enables you to select how much gain is applied to the front-height effect speakers. There are three settings - Low, Mid, and High. Onkyo Original DSP Modes: The OnkyouTX-SR508 features its own proprietary set of DSP (Digital Signal Processing) modes to bring your movies and music more to life. Audyssey Dynamic EQ: Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the best possible frequency response and surround levels moment-by-moment as volume is changed. The result is bass response, tonal balance and surround impression that remain constant despite changes in volume. Audyssey Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution. Front L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Center 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Surround L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Subwoofer 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC)) Dynamic Power 180 W (3 ohms, Front) 160 W (4 ohms, Front) 100 W (8 ohms, Front) THD (Total Harmonic Distortion): 0.08% (1 kHz, 1 W) Damping Factor: 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance: 200 mV/47 k-ohms (Line) Output Level and Impedance: 200 mV/2.2 k-ohms (Rec out) Frequency Response: 5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass)) Tone Control ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio: 100 dB (Line, IHF-A) Speaker Impedance: 6 ohms –16 ohms Video Section Input Sensitivity/Output Level and Impedance Video 1.0 Vp–p/75 Ù (Component) 0.7 Vp–p/75 Ù (Component PB/CB, PR/CR) 1.0 Vp–p/75 Ù (Composite) Component Video Frequency Response: 5 Hz–100 MHz/0 dB, -3 dB

Brand: Accessories & Gadgets Price: 12500 Seller Type: An Individual Condition: Used Yamaha dts amplifire in mint condition Minimum RMS Output Power per Channel MAIN, 20Hz-20kHz, 0.06% THD, 8 ohms - 100W + 100W CENTER, 20Hz-20kHz, 0.06% THD, 8 ohms - 100W REAR, 20Hz-20kHz, 0.06% THD, 8 ohms - 100W + 100W Dynamic Power per Channel MAIN, 8/6/4/2 ohms - 130/150/190/240W Dynamic Headroom 8 ohms - 1.3dBDamping Factor (8 ohms, 20 Hz-20 kHz) MAIN L/R, 80 or moreInput Sensitivity/ Impedance PHONO MM - 2.5mV/47k ohmsCD, etc - 150mV/47k ohmsMaximum Input Signal Level PHONO MM, 1kHz, 0.05% THD, (Effect on) - 100mVCD, etc (Effect on) - 2.2VOutput Level/ ImpedanceREC OUT - 150mV/900 ohms SUBWOOFER(EFFECT OFF, MAIN SP:SMALL)MONO - 4.0V/1.2k ohmsHeadphone Jack Rated Output/ImpedanceCD, etc, - 400mV/560 ohms Frequency Response (10Hz-100kHz) CD, etc, MAIN L/R - +0/-3.0dBRIAA Equalization Deviation (20Hz-20kHz)PHONO MM - 0 +/- 0.5dBBASSBoost/Cut - +/-10dB (50Hz)TREBLEBoost/Cut - +/-10dB (20kHz)Bass Extension+6dB (60Hz)Filter CharacteristicsSUBWOOFER OUT: LPF - fc=90Hz, 18dB/octMAIN, CENTER, REAR SP SMALL: HPF - fc=90Hz, 12dB/octTotal Harmonic Distortion (20Hz-20kHz)PHONO MM to REC OUT (1V) - 0.02%CD, etc, to MAIN SP OUT L/R (45 Watts, 8 ohms) - 0.04%Signal-

Type Audio Midi Interfaces Product Description A 24-bit USB recording interface. The compact Alesis iO2 EXPRESS audio-recording interface is ideal for home studios and portable recording setups. The 2-channel USB interface for Mac and PC-based systems enables you to record at up to 24-bit resolution for input into virtually all DAW, recording, and performance software. The Alesis i02 EXPRESS recording interface is small enough to comfortably fit into your mobile recording rig, laptop bag, or backpack, yet it contains high-quality components and circuitry suitable for the studio. Flexible recording and playback The i02 EXPRESS interface's discrete-design preamplifiers and true 48-volt phantom power ensure that you capture microphones' complete signal. High quality analog-to-digital and digital-to-analog converters ensure that every detail of your session or performance gets recorded – and played back on your monitoring system. It's class compliant, so you can use the plug-and-play Alesis iO2 EXPRESS with virtually any computer. The iO2 EXPRESS is USB bus powered so you won't need to carry a bulky power supply, and its performance is optimized for minimal laptop battery drain so you'll be able to track long sessions and gigs remotely. Complete iO The iO2 EXPRESS has 2 input channels. Each channel has an XLR microphone input, a 1/4" TRS insert for external effects units, and a 1/4" TS jack that works with line-level sources and can accommodate direct connection of guitars. The Alesis iO2 EXPRESS sends and receives 2 audio channels on a single USB cable for simple, universal interface. You can monitor your sessions on any studio monitoring or other loudspeaker system via dual 1/4" balanced outputs. For remote tracking and alternative playback, the iO2 EXPRESS has a 1/4" TRS headphone output. The iO2 EXPRESS features traditional MIDI In and Out jacks for playing and controlling software with keyboard and pad controllers, workstations, and other MIDI-compatible instruments. Level management Each channel has a gain trim control, and there's a master level control for optimal gain staging. When monitoring on headphones, you'll appreciate the dedicated volume control. You can also visually monitor levels and operation using the tricolor, stereo metering tree and lighted status indicators. Complete the package The Alesis iO2 EXPRESS comes complete with a copy of Steinberg Cubase LE digital audio workstation (DAW) software. Cubase is one of the most popular DAWs in the world thanks to its intuitive approach to composing, recording, editing, and mixing. In addition to the included software, the Alesis iO2 EXPRESS is compatible with virtually all audio and MIDI software. Features 2-channel computer audio recording interface Record up to 24-bit/48kHz audio into virtually any software Monitor sessions with balanced studio monitor and headphone outputs High-quality A/D and D/A converters, discrete-design preamps, 48V phantom power Inputs for microphones, line-level sources, and instruments including guitars Tricolor stereo level meter and lighted status indicators for visual monitoring MIDI Input and Output jacks for playing and controlling software instruments USB bus powered – no external power supply needed Includes: iO2 EXPRESS interface USB cable iO2 Express Audio Interface Specifications: SYSTEM REQUIREMENTS Mac: OS X 10.2+ Windows: XP, Vista, or 7 USB port FREQUENCY RESPONSE MIC/LINE IN to USB OUT: ±0.1dB MIC/LINE IN to MAIN OUT (through ADC/DAC) ±0.35dB SIGNAL-TO-NOISE RATIO (SNR) MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 ohms GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 ohms GUITAR IN (unbalanced) to USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 ohms TOTAL HARMONIC DISTORTION + NOISE (THD+N) MIC/LINE IN (balanced) to INSERT OUT: GUITAR IN (unbalanced) to INSERT OUT: % Input Gain = minimum, 1KHz input signal, INSERT OUT = 5.3dBV MIC/LINE IN (balanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.3dBFS GUITAR IN (unbalanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.7dBFS MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV

Up for sale is this beast. It can run two pioneer D4 or D2 woofers The Alpine MRV-1005 V12 Expert. Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz) Per channel into 4 ohms: 150 Watts Per channel into 2 ohms: 300 Watts Bridged into 4 ohms: 600 Watts Total Harmonic Distortion:0.04% Frequency Response: 8 Hz to 60 kHz (+0, –1 dB) Signal-to-Noise Ratio: 105 dBA (referenced to rated power) Slew factor: Greater than 5 Input Sensitivity (for rated (200mV to 4.0V (1.0V at center detent) power output) Speaker Impedance: 4 or 2 ohms (Stereo), 4 ohms (Bridged) Active Dividing Network Frequency and Slope: 50 to 200 Hz, 12 dB per octave (HP/LP) Parametric EQ Frequency and Gain Adjustment This amp at 13.5 Volts has been tested to do 676 RMS so expect more power than that at 14.4 Volts when running them in the real world. They are under rated amps. Location: Peshawar Shipping ob buyer's risk / expense

McIntosh Aw. Response kHz (+dB). Distortion 0.5%. Noise & hum -85dB. Output impedance , and 600 ohms. 600 ohm balanced to ground. 4, 8 and 16 ohms isolated from ground. Damping factor 12 for 4, 8 and 16 ohms. Input impedance 500k. Input sensitivity 0.5V. MECHANICAL: Gray hammertone chassis. Octal socket powers McIntosh C-8, C-4, C104, or C-108 preamps. Connector strip for 4, 8 and 16 ohms as well as 0.5V input. Audio input. TUBES: 2-6BG6 output, 12AX7, 12AU7,-12BH7, 5U4GA Condition: - No Warranty

Type Studio Microphone Product Description Large-capsule condenser microphone. The Nova large-capsule condenser microphone from M-Audio® combines low-noise Class A electronics and an evaporated-gold diaphragm over one inch in diameter to achieve low-noise, high-fidelity recording, Nova ensures recordings that are faithful to the original source and free from distortion or unwanted coloration of the sound. The solid brass body and capsule offer protection and reliability. A hard mount and soft case are provided. Features 1.1" Diameter evaporated gold diaphragm > offers smooth, accurate sound Cardioid pickup pattern > easy to isolate from unwanted studio sounds Class A solid-state electronics > designed for low noise and minimal coloration Solid brass body and capsule > delivers protection and reliability Complete ready-to-use package > Includes hard mount, soft case, and XLR cable NOVA Specifications: Type: Large diaphragm condenser, gold evaporated Polar pattern: Cardioid Frequency response: 20Hz-18kHz Sensitivity: 16mV/Pa (-36dBV) Max. SPL for 0.5% THD: 128dB Equivalent noise level: 14dB-A weighted Output impedance: 200 ohms Recommended load impedance: > ohms Preamp topology: Class A FET preamp Power requirement: 48V phantom power Connector: 3-pin male XLR Grille and Body: Wire mesh grille and body, all brass Finishing: Nickel silver plating Size/weight: 7.3"H x 1.9"W/ 23oz

Alpine V Power Class D mono amplifier MRP-M450. Outstanding audio performance — you expect it when the amp is an Alpine. Alpine's V-Power amplifiers supply the high level of performance you want without shaking loose too much of your hard-earned cash. The MRP-M450 mono subwoofer amplifier will power your subwoofer with 220 watts of power. Add a second sub and the MRP-M450 pumps out 400 watts of power — enough to get almost any car shaking. The variable low-pass filter adjusts the frequency output to match your system, while the Bass EQ lets you dial in some extra boost on the lows. A subsonic filter eliminates inaudible, ultra-low bass notes for cleaner output. The amp's machined-metal heatsink keeps the internal parts cool and distortion low even when you're cranking the volume. Gold-plated screw terminals and RCA connections resist corrosion that can degrade signal performance. Specs: mono subwoofer car amplifier 220 watts RMS x 1 at 4 ohms (400 watts RMS x 1 at 2 ohms) variable low-pass filter (50-200 Hz, 24 dB/octave) tuned Bass EQ (0-12 dB bass boost at 50 Hz) subsonic filter (15 Hz, 24 dB/octave) STAR Topology (minimizes internal noise and prevents ground interference) speaker- and preamp-level inputs gold-plated screw terminals Excellent condition. No problems Shipping all over Pakistan on buyer's expense and risk. For more high quality branded car audio equipment feel free to contact. Thank you.

Mini Tie Clip in Pakistan Mini Tie Clip Price in Pakistan. EM400 MINI TIE CLIP MICROPHONE GENERAL DESCRIPTION: Uni-directional type microphone suitable for speech, teaching,computer recording, tour guide etc. Using black plate microphone element and low noise FET transistors. It can work continously for long period of time as basic current consumption is very low. Equipped with low noise cable to reduce distortion during transmission. Light weight moisture-resistant aluminum body. SPECIFICATION: TRANSDUCER: BACK ELECTRET CONDENSER ELEMENT FREQUENCY RESPONSE: 100Hz~16KHz PICK-UP PATTERN: CARDIOID SENSITIVITY: -72dB TO 3dB IMPEDANCE: 500 ohms HOUSING: ALUMINUM CONNECTOR: 3.5mm phone POWER SUPPLY: DC 1.35V Views: 26

Description Features: Input pre-amps have remarkably low noise levels, and the DBX noise reduction reduces tape noise without side effects. Better control is possible over equalizer to tape with a 5-band graphic than with the common 2-band Hi/Lo controls, allowing a greater range of play with your audio. The graphic bands of the MT120s are 100Hz, 400Hz, 1kHz, 5kHz and 10kHz. The mt120s also has 2 bus input sockets which means that you can add 2 new signals, more with external mixer (not included), and have a stereo effects return on mix-down. What this does is increases the flexibility of the device when used in conjunction with sequencers and computers and multi-timbral sound modules. This makes it possible to create a the most impressive, full, backing track possible without making any sacrifices. MT120S SPECIFICATIONS • Input Impedance (all inputs): 10 kOhm • Input Level: -56 dB (Gain Max) to +10 dB (Gain Min) • Output Impedance (all line outputs): 1kOhm • Output Level (all line outputs): -10 dB • Phones Output: Load impedance 8-40 Ohms, max output level 45 mW per channel • Tape Speed: 9.5 cm/s, 4.8 cm/s • Varispeed: +/- 10% approx. • Wow and Flutter: less than 0.12% WRMS (4.8 cm/s) • Frequency Response: 40Hz-18kHz (dbx out, 9.5 cm/s +3/-5 dB) 40Hz-13kHz (dbx out, 4.8 cm/s, +3/-5 dB) • Distortion: 1.0% (400 Hz, -13 dB Rec level, dbx on) • S/N ratio (3% THD level): 85dB (dbx on, IHF-A) • Channel separation: Better than 65dB at 1kHz • Erasure ratio: Better than 70dB at 1kHz • Record/play head type: 4-channel Permalloy • Erase head type: 4-channel 

Sparingly used and in genuine condition scratch-less Power rating: 50W RMS x 2 [20Hz - 20kHz, Total harmonic distortion [25W, 8 ohms]: Phono: 0.007% LINE: 0.005% Signal to noise: Phono MC / MM: > 76dB / 92dB CD / TUNER / TAPE / LD-TV / VCR: > 100dB Dimensions [W x H x D]: 435 x 113 x 330mm Weight: 7.0kg NOTE: ONLY CALLS WILL BE RESPOND

Sony STR-D911 in very good condition, never repaired. Original Remote. 110V (converter not included). 200 Watts - 4 and 8 OHMS Selector Switch. 5 Channel Surround Sound. Very Nice Display. 100% working condition Original Pictures attached. Dont call, only sms. *Delivery All Over Pakistan* Buyer Will Bear The Shipping Cost SPECS.- 8-ohm load, both channels driven, from 20-20,000Hz, rated 100watts per channel minimum RMS power, with no more than 0.1% total harmonic distortion from 250 milliwatts to rated output. Surround sound- front 80watt per channel, Center 80watts, Rear 25watts. dynamic power output 200w+200w (4ohms) 0r 150w+150w (8ohms) Features: AM/FM digital tuner Dolby Pro Logic Surround Digital Signal Processor Inputs: PHONO, CD, DAT, TAPE1, TAPE2, VIDEO1, VIDEO2, VIDEO3 (front) Outputs: DAT, TAPE1, TAPE2, VIDEO1, MONITOR Motorized master volume control Built-in AC Outlet (to drive other components) Speaker outputs (5.0): Front Left/Right (A, B), Rear Left/Right, Center Audio modes: PRO LOGIC, DOLBY SURROUND, THEATER, LIVE, HALL, DANCE, SIMULATED, ACOUSTIC Surround modes: PHANTOM, 3 CH LOGIC, NORMAL, WIDE No foolish offers, price is almost final. #Amplifier #Deck #Speaker #Remote #Music Views: 4

Music power 94W (4 ohms, 1kHz) THD (at the time of an Output power) Main Amp: 0.1% or less Cross modulation distortion Main Amp: 0.1% or less (70Hz:7kHz=4:1, SMPTE) Power Band Width (IHF) 5Hz - 40kHz (8 ohm, one-side-channel operation) Frequency characteristic (at the time of 1W output) Phono1, 2:30Hz-15kHz±0.5dB (RIAA deflection) Aux: 10Hz-30kHz±1.0dB Main Amp: 10Hz-40kHz±1.0dB Dumping factor 40 (8ohm) Input sensitivity/impedance (1kHz) Phono1:2.5mV/50kohm Phono2:2.5mV/50kohm Tuner, Aux, 4ch adaptor, and Tape monitor(pin/din):100mV /, 50kohm Main Amp: 800mV / 40kohm Phono maximum permissible input 300mV (less than THD 0.5%) Output voltage (1kHz) Tape Rec(Pin/Din):100mV/30mV 4ch Adaptor:100mV Pre Amp: 0.8V (less than THD 0.08%) 4.0V (a maxima and less than THD 0.5%) A hum and a noise (IHF) Phono1, 2:70dB or more Tuner, AUX: 80dB or more Main Amp: 100dB or more Tone control Bass: ±15dB (50Hz) Treble:±15dB (15kHz) loudness (Volume-30dB o'clock) + 10dB (50Hz) and +8dB (15kHz) A low filter - 12dB (50Hz, 6 dB/oct) A high filter - 12dB (10kHz, 6 dB/oct) Muting -20dB Power dissipation (maxima) 65W(125VA) Dimensions Width 440x height 140x depth of 322mm Weight 11.5kg