Ohms connections

3D-Compatible: The HDMI v.1.4 connections will accept 3D video from your 3D-ready Blu-ray player and output the video signal in 3D to your 3D-ready HDTV. Double Bass: With the double bass feature you can boost the bass output by feeding the low frequency signals from the left and right channels (when front speakers set to large) to both the front speakers and to the subwoofer. WRAT (Wide Range Amplifier Technology): This technology uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. H.C.P.S. (High Current Power Supply): The Onkyo HT-R580 is equipped with a H.C.P.S. massive high power transformer. Digital-to-Analog Converters (DACs): This receiver is equipped with 192kHz/24-bit Burr-Brown DACs to decode and playback high-resolution recordings with less jitter and clearer sound. 32-Bit Processing DSP: The Onkyo AV receiver is equipped with a powerful and highly accurate 32-bit processing DSP (Digital Signal Processor) for better surround sound reproduction. Supported Audio Formats: The HT-R580 supports the following audio formats: 2-channel Linear PCM (32-192-kHz, 16/20/24-bit/) Multichannel Linear PCM (7.1-ch, 32-192-kHz, 16/20/24-bit) Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio) Dolby Pro Logic IIx Music Settings: While listening in the Dolby Pro Logic IIx Music format, there are three further enhancements you can adjust: Panorama: Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu. Dimension: Allows you to move the sound field forward or backward. Centre Width: Allows you to adjust the width of the centre channel. PLIIz Height Gain: The Height Gain Control in Dolby Pro Logic IIz enables you to select how much gain is applied to the front-height effect speakers. There are three settings - Low, Mid, and High. Onkyo Original DSP Modes: The OnkyouTX-SR508 features its own proprietary set of DSP (Digital Signal Processing) modes to bring your movies and music more to life. Audyssey Dynamic EQ: Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the best possible frequency response and surround levels moment-by-moment as volume is changed. The result is bass response, tonal balance and surround impression that remain constant despite changes in volume. Audyssey Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution. Front L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Center 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Surround L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Subwoofer 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC)) Dynamic Power 180 W (3 ohms, Front) 160 W (4 ohms, Front) 100 W (8 ohms, Front) THD (Total Harmonic Distortion): 0.08% (1 kHz, 1 W) Damping Factor: 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance: 200 mV/47 k-ohms (Line) Output Level and Impedance: 200 mV/2.2 k-ohms (Rec out) Frequency Response: 5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass)) Tone Control ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio: 100 dB (Line, IHF-A) Speaker Impedance: 6 ohms –16 ohms Video Section Input Sensitivity/Output Level and Impedance Video 1.0 Vp–p/75 Ù (Component) 0.7 Vp–p/75 Ù (Component PB/CB, PR/CR) 1.0 Vp–p/75 Ù (Composite) Component Video Frequency Response: 5 Hz–100 MHz/0 dB, -3 dB

Hello Everyone! I am selling my personal Home Theater System (a few months old) which is in an immaculate, spotless condition and nearly as good as new! No blemishes, scratches, stains, spots whatsoever. This is a personally owned system, sparingly used over the weekends and taken great care of.This Home Theater system is one-of- a kind! Reason for selling: Moving to a smaller place where one wouldn't be able to use it properly. This Ultimate Package includes the A/V receiver plus 5 Speakers and a Sub-Woofer: (1) The "Award-winning” YAMAHA RX-V 675 A/V Receiver SPECIFICATIONS & FEATURES: - 95 Watts per channel at 8 Ohms (High Current Amp) - 7.2 Channels - 4K Passthrough and Upscaling and 3D Video Compatibilty - Dolby TrueHD and DTS-HD Master Audio; Dolby Digital Plus and DTS-HD High Resolution Audio - Ethernet Network Connection - AirPlay Support - Discrete amp configuration - Powered Zone 2 - 6 HDMI Ports - 1 MHL (Mobile High Definition Link) compliant input port - Ipod Port and a USB input which supports FLAC and WAV files. - Analog audio/video connections as well as 1 component and 2 each digital optical and coaxial. - Internet Radio streaming options like vTuner radio and Napster, via Apple AirPlay (for streaming from an Apple device) and DLNA support (for streaming from a networked hard drive), to traditional AM and FM tuners. ACCESSORIES INCLUDE: - Remote Control -Antenna and YPAO Mic (For Sound Calibration purposes) -Yamaha CD Manual SPEAKERS: - A pair of JBL Northridge N26 Book shelf speakers as Front Left and Right Speakers. Northridge is a professional elite series of JBL especially designed to bring in the professional cinema quality sound to home theater setups. (125 watts RMS continuous each at 8 ohms).Do not get fooled by their size! They are larger than your standard book shelf speakers with the main driver the size of 6 and a quarter inch. - Polk Audio Tsx- 150C Centre Channel Speaker (125 watts RMS at 8 ohms).This powerful center channel speakers does not distort even at the highest volumes! -A pair of Polk Audio Tsi 100 Book Shelf Speakers for Surrounds (100 RMS watts at 8 ohms). - Polk Audio PSW110 10"inch Active Powered Sub-Woofer. The most snappiest, tighest and punchiest deep bass subwoofer for its size in the market! No boomy distorted bass! The price offered is a bang for buck! Slightly negotiable only for serious buyers and true audiophiles who interested in buying this outstanding system. Do not simply call to negotiate as such customers may not be entertained! A demo may be arranged upon request.But only for those who are interested in buying,others may pass. . In addition the reference grade 'MONSTER CABLES' being used with the system will be provided for free! Original Carton Boxes for the AVR, Centre and Surround Speakers are available. I will be available to be contacted between 12 pm to 10 pm

Please call me for details. No match for quality in the price.. 4-Channel Picasso Series Amplifier Full MOSFET Circuitry RMS Power Rating: 80 Watts x 4 Channels at 4 Ohms 130 Watts x 4 Channels at 2 Ohms 260 Watts x 2 Channel at 4 Ohms (Bridged) PWM Circuitry 4 Gauge Power / Ground Connections Tri-Guard Protection Circuit IDI (Inetlligent Distress Indicator) Protection LED Platinum RCA Inputs and Outputs Bi-Linear Selectable 12dB Crossovers for Inputs and Outputs (Hi / Full / Low) Variable Subwoofer Equalizer: 0 - 18 dB Phase Inversion Switch: ° OEM Floating Ground Input Tri-Mode Operation Line Outputs Frequency Response: 10 Hz - 30 kHz Damping Factor: >200 Variable Input Sensitivity: 0.5 - 4V Dimensions: 9-1/2" L x 14" W x 2-1/2" H

Item is in Sukkar, Sindh but can be shipped anywhere in Pakistan.. Please call me for details. No match for SQ in the price.. 4-Channel Picasso Series Amplifier Full MOSFET Circuitry RMS Power Rating: 80 Watts x 4 Channels at 4 Ohms 130 Watts x 4 Channels at 2 Ohms 260 Watts x 2 Channel at 4 Ohms (Bridged) PWM Circuitry 4 Gauge Power / Ground Connections Tri-Guard Protection Circuit IDI (Inetlligent Distress Indicator) Protection LED Platinum RCA Inputs and Outputs Bi-Linear Selectable 12dB Crossovers for Inputs and Outputs (Hi / Full / Low) Variable Subwoofer Equalizer: 0 - 18 dB Phase Inversion Switch: 0° - 180° OEM Floating Ground Input Tri-Mode Operation Line Outputs Frequency Response: 10 Hz - 30 kHz Damping Factor: >200 Variable Input Sensitivity: 0.5 - 4V Dimensions: 9-1/2" L x 14" W x 2-1/2" H

RS15M HD If you need a wedge monitor with more power and clear, precise audio, the RS15M HD is an ideal monitor for almost any live application. A custom designed 15-inch woofer handles the low frequencies while a titanium compression driver offers precise, lucid performance on the top end. The RS15M HD provides 600 watts peak/300 watts RMS power handling at eight ohms, so you have ample power for any performance. Two-way passive wedge monitor enclosure 600 watt peak/300 watt RMS power handling at 8 ohms Custom designed 15-inch low frequency driver 1-inch throat horn 1.5-inch titanium compression driver Dual-port tuned enclosure Dual 1/4-inch and Speakon® connections

Alpine V Power Class D mono amplifier MRP-M450. Outstanding audio performance — you expect it when the amp is an Alpine. Alpine's V-Power amplifiers supply the high level of performance you want without shaking loose too much of your hard-earned cash. The MRP-M450 mono subwoofer amplifier will power your subwoofer with 220 watts of power. Add a second sub and the MRP-M450 pumps out 400 watts of power — enough to get almost any car shaking. The variable low-pass filter adjusts the frequency output to match your system, while the Bass EQ lets you dial in some extra boost on the lows. A subsonic filter eliminates inaudible, ultra-low bass notes for cleaner output. The amp's machined-metal heatsink keeps the internal parts cool and distortion low even when you're cranking the volume. Gold-plated screw terminals and RCA connections resist corrosion that can degrade signal performance. Specs: mono subwoofer car amplifier 220 watts RMS x 1 at 4 ohms (400 watts RMS x 1 at 2 ohms) variable low-pass filter (50-200 Hz, 24 dB/octave) tuned Bass EQ (0-12 dB bass boost at 50 Hz) subsonic filter (15 Hz, 24 dB/octave) STAR Topology (minimizes internal noise and prevents ground interference) speaker- and preamp-level inputs gold-plated screw terminals Excellent condition. No problems Shipping all over Pakistan on buyer's expense and risk. For more high quality branded car audio equipment feel free to contact. Thank you.

Resound HD As a company of musicians, Samson always tries to be in touch with the needs of artists. The revamped Resound HD line is a perfect example of our design meeting the demands of musicians. We've re-imagined our incredibly popular Resound line of passive PA speakers to provide increased power handling and great versatility from a variety of different enclosure options. Beefier woofers and upgraded compression drivers give the new Resound HD series all the style and performance you would expect from professional-grade PA speakers. Two-way passive PA speaker cabinet 300 watt peak/150 watts RMS power handling at 8 ohms Custom designed 10-inch low frequency driver 1-inch throat horn 1.5-inch titanium compression driver Dual-port tuned enclosure Dual 1/4-inch and Speakon® connections

Speaker Ring foam +tweeter change sound 100&perfectly WHARFEDALE VALDUS 400 SPEAKERS SPECIFICATIONS Power handling: 150 watts Sensitivity: 92 dB Impedance: 8 ohms Magnetically shielded? No HxWxD (mm) / Weight: 800 x 250 x 290 Frequency response: 40-20,000 Hz Biwireable? No Connections: 4mm banana plug/binding post Bass port? Front ported Drivers: HF: 28mm dome, LF: 2 x 200mm mid & bass Extra: Removeable grill. Views: 2

Description: This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from stainless steel fibers (as opposed to plated silver) and doesn’t have a Nylon core. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Also, it’s somewhat ‘hairy’ and can be slightly more difficult to work with in close, fine conditions than the other thread. Our resident E-Textiles expert suggests waxing the thread for hand sewing, as this should take care of any ‘hairy thread’ issues. Since waxing is impractical in machine sewing applications, avoid sewing close connections by machine as the ‘hairs’ could potentially short across small distances. Features: Made from Stainless Steel Fibers Resistance: 28 Ohms/ft

The Bass Traveler from M-Audio is a two-channel, rechargeable headphone amplifier capable of powering two sets of headphones, while ensuring crisp clear sound. The unit also features an integrated "Boost" switch offering flat, medium, and high settings to optimize the sound for any headphone. The rechargeable Lithium-polymer battery offers up to 8-hours of use from a single charge. The TRRS connections are compatible with most popular in-line remote control headphones. The Bass Traveler also ships with a TRRS connection cable and a micro-USB charging cable. Battery-powered amplifier can drive two sets of headphones Long-lasting (approx. 8 hours) rechargeable Lithium polymer battery LED indicator for power on, battery charge, low battery Two 1/8" / 3.5mm stereo headphone jacks Rotary on/off/volume control Selectable 2-position boost switch optimizes sound for any headphone Compatible with headphones from 16 to 100 ohms Micro-USB port for battery charging One 1/8" / 3.5mm stereo input jack Compatible with most popular in-line remote control headphones

Klipsch Handphone S4A. Original pics and screen shot of klipsch Products verification QR Code is attached. Selling 4,000 Less then Market price. Box packed. Specification: Style: In-ear Driver Design: Dual Magnet, Dynamic Moving Coil Micro Speaker Driver Components: Full Range KG 25A Frequency Response: 10Hz - 19kHz Sensitivity: 110dB (1m/W) Impedance: 18 ohms (No need of Headphone Amplifier) Noise Isolation: -16 Input Connections: 3.5mm Weight: 14.7 grams

Product description This is a breakout board for the very handy 16-Channel Analog Multiplexer This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx). It works with both digital and analogue signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”). Features: 1.2V to 6V operation 2.”On” resistance: 70 Ohms @ 4.5V 3.6ns break-before-make @ 4.5V 4.Wide operating temperature range: -55’C to 125’C Packing List: 1 *16CH Analog Digital MUX Breakout Board CD74HC4067 Precise Compatible Arduino Views: 4