ONKYO HT R580 7.1 CHANNEL 1200 WATT A/V RECEIVER IN PAKISTAN

3D-Compatible: The HDMI v.1.4 connections will accept 3D video from your 3D-ready Blu-ray player and output the video signal in 3D to your 3D-ready HDTV. Double Bass: With the double bass feature you can boost the bass output by feeding the low frequency signals from the left and right channels (when front speakers set to large) to both the front speakers and to the subwoofer. WRAT (Wide Range Amplifier Technology): This technology uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. H.C.P.S. (High Current Power Supply): The Onkyo HT-R580 is equipped with a H.C.P.S. massive high power transformer. Digital-to-Analog Converters (DACs): This receiver is equipped with 192kHz/24-bit Burr-Brown DACs to decode and playback high-resolution recordings with less jitter and clearer sound. 32-Bit Processing DSP: The Onkyo AV receiver is equipped with a powerful and highly accurate 32-bit processing DSP (Digital Signal Processor) for better surround sound reproduction. Supported Audio Formats: The HT-R580 supports the following audio formats: 2-channel Linear PCM (32-192-kHz, 16/20/24-bit/) Multichannel Linear PCM (7.1-ch, 32-192-kHz, 16/20/24-bit) Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio) Dolby Pro Logic IIx Music Settings: While listening in the Dolby Pro Logic IIx Music format, there are three further enhancements you can adjust: Panorama: Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu. Dimension: Allows you to move the sound field forward or backward. Centre Width: Allows you to adjust the width of the centre channel. PLIIz Height Gain: The Height Gain Control in Dolby Pro Logic IIz enables you to select how much gain is applied to the front-height effect speakers. There are three settings - Low, Mid, and High. Onkyo Original DSP Modes: The OnkyouTX-SR508 features its own proprietary set of DSP (Digital Signal Processing) modes to bring your movies and music more to life. Audyssey Dynamic EQ: Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the best possible frequency response and surround levels moment-by-moment as volume is changed. The result is bass response, tonal balance and surround impression that remain constant despite changes in volume. Audyssey Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution. Front L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Center 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Surround L/R 130 W/Ch (6 ohms, 1 kHz, 1%, 1 channel driven, FTC) Subwoofer 130 W (6 ohms, 1 kHz, 1%, 1 channel driven, FTC)) Dynamic Power 180 W (3 ohms, Front) 160 W (4 ohms, Front) 100 W (8 ohms, Front) THD (Total Harmonic Distortion): 0.08% (1 kHz, 1 W) Damping Factor: 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance: 200 mV/47 k-ohms (Line) Output Level and Impedance: 200 mV/2.2 k-ohms (Rec out) Frequency Response: 5 Hz–100 kHz/+1 dB, -3 dB (DSP bypass)) Tone Control ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio: 100 dB (Line, IHF-A) Speaker Impedance: 6 ohms –16 ohms Video Section Input Sensitivity/Output Level and Impedance Video 1.0 Vp–p/75 Ù (Component) 0.7 Vp–p/75 Ù (Component PB/CB, PR/CR) 1.0 Vp–p/75 Ù (Composite) Component Video Frequency Response: 5 Hz–100 MHz/0 dB, -3 dB