Obstacle

1. Induction to the object output 0,Not induction when output:1,then can be directly connected to the microcontroller IO port 3v and 5v. 2. The induction distance 2 to 40 cm, distance, good anti-interference ability. (note: the infrared sensor is not all objects can be the same, the distance of the objects of different colors on the reflectivity of different light, the deeper the closer it gets to the black by the color of the object detection distance is shorter, the sensor 2 to 40 cm is measured against the white walls) 3. The speed is quick, is suitable for smart car obstacle avoidance, black and white line tracking, prevent fall, counter products, line cutting, liquid level detection, etc. Box Pack - No Warranty

1. induction to the object output 0,not induction when output:1,then can be directly connected to the microcontroller io port 3v and 5v. 2. the induction distance 2 to 40 cm, distance, good anti interference ability. note: the infrared sensor is not all objects can be the same, the distance of the objects of different colors on the reflectivity of different light, the deeper the closer it gets to the black by the color of the object detection distance is shorter, the sensor 2 to 40 cm is measured against the white walls 3. the speed is quick, is suitable for smart car obstacle avoidance, black and white line tracking, prevent fall, counter products, line cutting, liquid level detection, etc. " Box Pack - No Warranty

The sensor module is adaptable to ambient light and is not affected by outside light. 2. The board has a multi loop precision adjustable potentiometer, which can be adjusted according to the use environment. The adjustment range is from 3cm-100cm. 3. Because it is a reflection principle, with a reflection of specific objectives, can adjust according to the situation. 4. There is a green LED on the circuit board. When the obstacle is detected, the luminescent OUT output continues to be low, and the barrier free is the continuous high level of the OUT output. Features: 1. Super micro, and design the mechanical installation hole. 2. Less power consumption, wide working voltage range. Use modulation signal transmitting, distance, anti-interference performance is good, can work under outdoor not direct sunlight (distance will be shorter). 3. Range from 3cm to 100cm. 4. The obstacle avoidance using the window technology, avoid the problem of critical region, sensors work is stable, the user directly using the output signal, signal jitter don’t need to consider. 5. The sensor is active infrared reflection detection, so the reflectivity and shape of the target is the key to detect distance. 6. The black detection distance is the smallest, the white is the largest, the small area objects are small distance and the large area distance is large. Specifications: Mechanical rigidity: Flexibility Number of layers: single side Base material: Copper Working voltage: 3.8V-5.5V Working current (5V): typical current is 6mA Obstacle detection time (effective detection range from the non-obstructing target to the presence of an obstacle, or the obstruction to the obstacle course to disappear): Detection range (test environment, room, maximum power, voltage 5v, power consumption 6.5 mA) White walls: approx. 100cm IBM black computer cover: approx. 20cm/7.87” One finger: approx.18cm/7.08” Palm: approx.30cm/11.81” A transparent original bead pen: approx.20cm/7.87” How does it work? The sensor fires infrared light, which is detected by reflected light, and if it detects an obstacle, the OUT foot outputs 0, otherwise 1. Module Interface: 1. VCC external DC3.8V-5.5V power source (can be directly with 5V single chip). 2. GND external DC3.8V-5.5V power supply anode. 3. OUT small digital output interface (0 and 1). Package Content: 1 x Infrared Digital Obstacle Avoidance Sensor Module 1 x M2 Screws Set

Description: This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to the requirements. The sensor has a detection distance, visible interference by small, cheap, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, and many other automation products pipeline piece. Electrical characteristics: U: 5VDC I: 100mA Sn:3-80CM Size: Diameter: 17MM Sensor Length: 45MM Lead Length: 45CM Applications: 1, the production line of automatic counting equipment goods 2, multi-reminder 3, Maze Robot 4, Kitchen Automation Systems 5, security alarm systems, etc. "

Description: This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to the requirements. The sensor has a detection distance, visible interference by small, cheap, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, and many other automation products pipeline piece. Electrical characteristics: U: 5VDC I: 100mA Sn:3-80CM Size: Diameter: 17MM Sensor Length: 45MM Lead Length: 45CM Applications: 1, the production line of automatic counting equipment goods 2, multi-reminder 3, Maze Robot 4, Kitchen Automation Systems 5, security alarm systems, etc. " Facebook page;ElectronicsArena.com Box Pack - No Warranty

Description: This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to the requirements. The sensor has a detection distance, visible interference by small, cheap, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, and many other automation products pipeline piece. Electrical characteristics: U: 5VDC I: 100mA Sn:3-80CM Size: Diameter: 17MM Sensor Length: 45MM Lead Length: 45CM Applications: 1, the production line of automatic counting equipment goods 2, multi-reminder 3, Maze Robot 4, Kitchen Automation Systems 5, security alarm systems, etc. " Facebook page;ElectronicsArena.com

Description: This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to the requirements. The sensor has a detection distance, visible interference by small, cheap, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, and many other automation products pipeline piece. Electrical characteristics: U: 5VDC I: 100mA Sn:3-80CM Size: Diameter: 17MM Sensor Length: 45MM Lead Length: 45CM Applications: 1, the production line of automatic counting equipment goods 2, multi-reminder 3, Maze Robot 4, Kitchen Automation Systems 5, security alarm systems, etc. " Box Pack - No Warranty

description: this is a set of transmitter and receiver in one of the photoelectric sensor. detection distance can be adjusted according to the requirements. the sensor has a detection distance, visible interference by small, cheap, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, and many other automation products pipeline piece. electrical characteristics: u: 5vdc i: 100ma sn:3 80cm size: diameter: 17mm sensor length: 45mm lead length: 45cm applications: 1, the production line of automatic counting equipment goods 2, multi reminder 3, maze robot 4, kitchen automation systems 5, security alarm systems, etc. " Box Pack - No Warranty

Object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected. Sensing distance 2-40 cm, distance, good anti-jamming capability. Note The infrared sensor can not detect all objects get the same distance, objects of different colors of light reflectance of different objects closer darker black shorter distance detected, the sensor 2-40 cm is measured against the white wall of Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters, cutting lines, liquid level detection. This sensor is made with black and white lines tracing the car ran without black line on white paper, available in concrete The yellow complex environment such as the black line patrol track. As long as the black line around the slightly lighter color than black can, Box Pack - No Warranty

Object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected. Sensing distance 2-40 cm, distance, good anti-jamming capability. Note The infrared sensor can not detect all objects get the same distance, objects of different colors of light reflectance of different objects closer darker black shorter distance detected, the sensor 2-40 cm is measured against the white wall of Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters, cutting lines, liquid level detection. This sensor is made with black and white lines tracing the car ran without black line on white paper, available in concrete The yellow complex environment such as the black line patrol track. As long as the black line around the slightly lighter color than black can, eliminating the traditional moves, so that environmental layout easier. The sensor 3 to 6V supply, Box Pack - No Warranty

Object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected. Sensing distance 2-40 cm, distance, good anti-jamming capability. Note The infrared sensor can not detect all objects get the same distance, objects of different colors of light reflectance of different objects closer darker black shorter distance detected, the sensor 2-40 cm is measured against the white wall of Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters, cutting lines, liquid level detection. This sensor is made with black and white lines tracing the car ran without black line on white paper, available in concrete The yellow complex environment such as the black line patrol track. As long as the black line around the slightly lighter color than black can, eliminating the traditional moves, so that environmental layout easier. The sensor 3 to 6V supply, wide range, suitable

It is a Wall Avoidance Robot equipped with IR sensors and have Arduino Feedback. Power full Turnigy Nano-Tech Batteries and they are unused right now. Robot have a 2 drive motors.Motors are of "Dong Shong". Robot is equipped with Ball Throwing Mechanism power my cam motor. All other details can be discussed on call.

Improves parking safety. Detection in all directions without dead angle. Minimize bumper damage. Totally built-in installation without impair overall appearance. Indicates object distance with different beeping frequencies. The sensor antenna activates 3 types of acoustic signals during approaching an obstacle at different distances. A continuous sound of Beep approximately between 0-0.3m A short interval sound of Beep approximately between m A long interval sound of Beep approximately between m Simple and concealed installation. The sensor antenna is entirely installed inside the bumper without any drilling work. Maintenance free, no cleaning or washing is required. Fit for any car, truck, RV or mini-van. Peel & Stick Antenna foil tape sensor for vehicles bumpers. Wires to Reverse Lamp (12 Volts DC) High output Piezo buzzer alert you with a beeping sound Detects object at 3 feet or less PD1 Rear parking sensor provides your car with full rear bumper protection when parking and reversing, alerting you to approaching objects via an audible speaker. When reverse gear is engaged the PD1 Rear parking sensor provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your rear bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones (Zones) alerting you of your proximity in relation to surrounding objects! The full length of your bumper (including the sides) is protected with an ever increasing beeping sound. As you reverse, Zone 1 (furthest away from your vehicle) detects the approaching object first. Zone 1: 80 to 50 cm in length - The 1st tone signals with a slow "be-be-be" sound Zone 2: 50 to 25 cm in length - The 2nd tone is a faster "be-be-be" sound Zone 3: 25cm and less - the 3rd tone is a constant "beeeeeep" sound Installation: The Universal Parking Dynamics PD1 is compatible with any Car, Vehicle, Van, 4x4, MPV, SUV and Motor home that has a plastic bumper and as 99.9% of cars and vehicles have plastic bumpers, you have no need to be concerned, even if your bumper appears part metal the PD1 will work. If you are in any doubt please contact us. The PD1 antenna is easy to fit and requires no bumper adjustments or holes ensuring a damage free installation. The antenna is cost effective to replace should you wish to move the sensor to a new car in the future or simply require a replacement. Mounting the Electronic Control Unit (ECU): The Rear ECU can be installed in various locations such as inside of the boot behind the trim or inside your rear bumper with the included adhesive mount. The Front ECU can be installed inside of the engine bay or behind the glove box, dashboard or trim with the included adhesive mount. Mounting the Speaker: Mount the parking sensor speaker using the included adhesive mount. The volume is loud enough to provide a good warning even if mounted behind your vehicles interior trim. This connects to the ECU by push fit connection. Can be extended up to 15M and will mount in any location. Mounting the Antenna: Mount the adhesive metallic parking sensor antenna onto the inner side of the front and/or rear bumper (depending upon which sensor option you choose) making sure the bumper surface is clean before attaching. Ensure the terminal connector is on the side where you have located the ECU. When the antenna has been attached, covering the whole of the bumper from left to right (leaving approx 15cm from the edges); the excess length is cut off. Place a piece of the included adhesive material or tape at either end of the antenna to ensure a secure installation onto the bumper. Its recommended (but not essential) to cover antenna length with a black anti-rust protection paint that is applied to the underneath of a car chassis or similar to protect from the elements. It is important that the antenna is installed at the highest part from the ground that corresponds to the furthest distance from the vehicle body as a precaution to prevent any interference from nearby metal parts. The recommended position of the parking sensor antenna is at least 40cm from ground level, with 50cm being optimum. Once the bumper is removed, if your vehicle has a metal crash protection bar and the antenna will be within 3 cm's of this metal bar (once the bumper is re-fitted) you can install a 2nd Antenna (included with all PD1 sensors) to prevent any reduction in detection range or insulate the metal crash bar. Courier TO Any CIty Avalable Box Pack - No Warranty

mart Robot Car Chassis Kit Speed Encoder Battery Box For Arduino Feature Smart car chassis tracing car Robot car chassis with code disk Ideal for DIY Mechanical structure is simple, it is easy to install This car is the tachometer encoder With a 4 AA battery box batteries not included Can be used for distance measurement, velocity Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control Size 20 x 14cm L x W Wheel size 6.5 x 2.7cm Dia. x H Note Motor power supply is 3V 6V. All the parameter above is tested without load. The car Chassis is transparent, you need to tear out protective paper. Package included 1 x Car chassis 2 x Gear motor 2 x Car tire 2 x Speed encoder 2 x Fastener 1 x Universal wheel 1 x Screwdriver 1 x Battery boxbatteries not included All necessary screw and nut Call Now - Box Pack - No Warranty

Description Price: Rs 1,990.00 Date: 16/04/2020 Accessories: Mobile Location: Office No. 6 Commercial Area, Alpha Society, Lahore. PRODUCT SPECIFICATIONS: Operating range: up to 10 meters (without obstacle) Frequency range: 20-20 kHz Product size: 8*3*11 cm Weight: The net weight of the product is about 30g Standby Time: 40 hours. Talking Time: 2-2.5 hours. Wireless Version: V5.0+EDR Charging Box Capacity: 380mAh    

--It adopts BR8041A02, which ruly complies with Bluetooth 5.0 echnical specifications, dual-mode ransmission.. --Longer ransmission distance, 10m-20m -long ransmission distance (no obstacle), strong signal.. --More stable ransmission rate, bps ransmission rate, providing high-speed file and audio data ransmission..

Highlight: Frequency range: 2.4GHz Charging voltage: DC4.8~5.4v Transmission distance: 20 meters without barriers Human obstacle distance: about 7 meters Microphone: digital microphone Working hours: 10H Signal-to-noise ratio: 64 dBm Start-up current: 1.5~6mA Charging interface: TYPE-C Transmission: 9MS Standby current 4.3~5.5mA Sensitivity (microphone): -26dB Battery capacity: button battery 90mAH Antenna type: ceramic antenna Charging current: 65mA Frequency response range: 20-20KHZ Description: Lavalier microphones can be used with smartphones. Plug and Play-Automatic Pairing: Wireless microphones for Mobile Phone is Professional and unique. They will automatically connect, no need to download an APP and Bluetooth. Our equipment includes a transmitter and a receiver (the maximum working range is 65ft), just plug the receiver into the device and turn on the microphone power to start recording. Say goodbye to messy cables, make your live streaming more relaxed and enjoyable Portable and Durable: Clip on a microphone built-in 90MA battery, the Mobile Phone microphone can record continuously for up to 10 hours, no external battery is needed, Unexpectedly exquisite and compact, simple shape, The design with a lapel clip is more convenient to wear Smart Noise Reduction 48KHz: Recording microphone with built-in noise reduction chip, provide professional full frequency audio 48KHz stereo CD quality, strong anti-interference ability, and the effective recognition of the original sound, in a noisy environment can still record the details of each sound Real-Time Radio-No: Built-in omnidirectional microphone, wireless microphone system stable signal and quick response, getting rid of the trouble of frequent re-recording. Features: 1. 9ms ultra-low latency,20 m barrier-free reception, it can use outdoor live broadcasts and take a small video. 2. It doesn’t need an APP, plug-and-play, or one-click connection, easy to wear. 3. Intelligent noise reduction, long endurance of 10 hours, easy to cope with all kinds of noisy environments, worry-free shooting, meet your needs for a day. 4. 360 full pointing pick up, record every detail of the sound. 5. Small and convenient, it is compatible with various devices. What’s in the box: Lavalier Microphone x 1 Receiver x 1 Charging Cable x 1 User Manual x 1 Type: Type C, iPhone SKU: 211114053119-Type C 211114053119-iPhone