Motor control unit

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Bosch Control Unit With DAFS & Recorder (CCSD-CURD) with express shipping all over Pakistan.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser interface control for advanced configuration and control • Built‑in MP3 recorder with internal memory and USB recording • Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility • On-board support for automatic HD camera control   Specifications: Supply voltage Adaptor 100 to 240 VAC, 50/60 Hz Current Consumption voltage Adaptor 1.9 A (100 VAC) to 1 A 240 (VAC) DC voltage Control Unit 24 V, 6.0 A Maximum number of Discussion Devices for Control Unit (without Extension Unit) 40 Discussion Devices per trunk 80 Discussion Device in total 24 V, Max 5.2 A (short-circuited protected) Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Frequency response 30 Hz to 20 kHz Ethernet speed 1 Gb/s Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 16 kHz (acoustical) Gain range Mute -10.5 to +12 dB SanDisk USB memory stick Formatted with FAT32 file system. Maximum size: 128 GB. Bite rate Internal memory size/hours, USB memory stick size/hours 225 MB 16 GB, 32 GB, 64 GB, 128 GB 64 8 hrs, 500 hrs, 1000 hrs, 2000 hrs, 4000 hrs 96 5 hrs, 350 hrs, 700 hrs, 1400 hrs, 2800 hrs 128 4 hrs, 250 hrs, 500 hrs, 1000 hrs, 2000 hrs 256 * 2 hrs, 125 hrs, 250 hrs, 500 hrs, 1000 hrs Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in) 19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop or 19 “ rack Material (top and base) Painted metal Color (top and base) Traffic black (RAL 9017) matt-gloss Rim front panel Pearl light grey (RAL 9022) matt-gloss Weight (CCSD‑CURD) Approx. 3.4 kg (7.5 lb) Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit Conference System with express shipping all over Pakistan.   Central control unit for use with DDS 5900 (standard) or DCS 6000 microphone units (requires optional Feature License). In standard DDS 5900 mode, powers up to 60 microphone units and supports up to 250 units. Also supports 2 languages and 32 interpreters. Two analog audio inputs for external sources such as wireless microphones, and 8 analog audio outputs for connection to videoconferencing system, A/V recording equipment, supplemental sound reinforcement system, or wireless language distribution system. With Feature License FL6000, the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages.  Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages.   Features: • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • Multi-language web browser for system configuration, microphone/request list control and basic operational parameters via tablet or computer • Built-in seat table for attaching seat numbers and names to units using the web browser • 2 Analog audio inputs • 8 Analog audio outputs for distribution of audio from eight groups of units, the floor channel or the interpreter channels • Connection for Emergency Evacuation Message (EEM) is available using ‘Audio In 2’ and a contact closure switch • Firmware upgrade of the entire DCS 6000 system is possible via a PC • Powers up to 60 units without additional power supply (depending on unit type) • Long life, low-noise built-in temperature regulated fan • Horizontal orientation of air stream for easy stacking of units in 19" racks • External control possible via a ‘simple to use’ protocol for external control over Ethernet • Using DCS-LAN, a proprietary high-speed all-digital audio channel, data and power bus • Four DCS-LAN chains powered by one external PS CU power supply • Versatile test program available for testing the system performance, the conference units and the interpreter sets • Video-follow-audio camera control with optional CP 7890 Camera Control System

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wirel Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply 6.5-12 V or 3.5-5.5V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART.

Description: Details iShopping.pk brings you the best price for Bosch   CCS Chairman Unit for the CCS 900 Conference System Long  with express shipping all over Pakistan.   The Bosch CCS Chairman Unit is intended for use with the Bosch CCS 900 Conference System. Much like the Delegate Unit, The Chairman Unit features a built-in speaker and an adjustable gooseneck microphone. The Chairman Unit provides added muting control over delegates. Permanently or temporarily mute delegate microphones in order to establish control over dialog. The CCS Chairman Unit's loudspeaker mutes automatically while in use, features a red LED ring to indicate power and a headphone output with dedicated level control.   Features: • Incorporates all functions of the CCS‑Dx CCS delegate units (with the exception of the possible‑to‑speak functionality/LED) • Priority button for chairman microphone • Temporary or permanent muting of delegate microphones • Optional chime tone facility for preceding chairman announcements • Modern, unobtrusive styling to match the CCS‑Dx CCS delegate units   Specifications: Connections 1x 78.7 in (2m) cable terminated with a molded 7-pole circular male connector, for loop-through interconnection to delegate unit or control unit 1x 7-pole circular female connector for loop-through interconnection to delegate units 2x 0.14" (3.5mm) stereo headphone sockets Mount Tabletop (portable or fixed) Material Base: polymer Top: painted metal Color Charcoal Weight 2.2lb (1kg) Dimensions (HxWxD) 2.8 x 8.7 x 5.5" (71 x 220 x 140mm) Height with mic in horizontal position: 5.3" (134mm) Length: 19.2" (488mm)

Description: Details iShopping.pk brings you the best price for Bosch   CCS Chairman Unit for the CCS 900 Conference System Short  with express shipping all over Pakistan.   The Bosch CCS Chairman Unit is intended for use with the Bosch CCS 900 Conference System. Much like the Delegate Unit, The Chairman Unit features a built-in speaker and an adjustable gooseneck microphone. The Chairman Unit provides added muting control over delegates. Permanently or temporarily mute delegate microphones in order to establish control over dialog. The CCS Chairman Unit's loudspeaker mutes automatically while in use, features a red LED ring to indicate power and a headphone output with dedicated level control.   Features: • Incorporates all functions of the CCS‑Dx CCS delegate units (with the exception of the possible‑to‑speak functionality/LED) • Priority button for chairman microphone • Temporary or permanent muting of delegate microphones • Optional chime tone facility for preceding chairman announcements • Modern, unobtrusive styling to match the CCS‑Dx CCS delegate units   Specifications: Connections 1x 78.7 in (2m) cable terminated with a molded 7-pole circular male connector, for loop-through interconnection to delegate unit or control unit 1x 7-pole circular female connector for loop-through interconnection to delegate units 2x 0.14" (3.5mm) stereo headphone sockets Mount Tabletop (portable or fixed) Material Base: polymer Top: painted metal Color Charcoal Weight 2.2lb (1kg) Dimensions (HxWxD) 2.8 x 8.7 x 5.5" (71 x 220 x 140mm) Height with mic in horizontal position: 5.3" (134mm) Length: 19.2" (488mm)

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)