Motor drivers

Manufacturer Part Number L293D Description IC MOTOR DRIVER PAR 16-DIP Lead Free Status RoHS Status Lead free RoHS Compliant Standard Package 25 Category Integrated Circuits ICs Family PMIC - Motor Drivers, Controllers Series - Motor Type - Stepper Bipolar Motor Type - AC, DC Brushed DC Function Driver - Fully Integrated, Control and Power Stage Output Configuration Half Bridge 4 Interface Parallel Technology - Step Resolution - Applications General Purpose Current - Output 600mA Voltage - Supply 4.5 V 36 V Voltage - Load 4.5 V 36 V Operating Temperature -40C 150C TJ Mounting Type Through Hole Package Case 16-DIP 0.300, 7.62mm Supplier Device Package 16-PowerDIP Online Catalog Drivers

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. The output enable of the L293D is directly connected to PWM outputs of the Arduino Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com

Maximum current rating: 30A • Maximum voltage: 41V • MOSFET on-resistance: 19mOhm (per leg) • Maximum PWM frequency: 20kHz • Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino (14A, V) is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors. Box Pack - No Warranty

Maximum current rating: 30A Maximum voltage: 41V MOSFET on-resistance: 19mOhm Maximum PWM frequency: 20kHz Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino 14A, V is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Maximum current rating: 30A Maximum voltage: 41V MOSFET on-resistance: 19mOhm Maximum PWM frequency: 20kHz Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino 14A, V is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors." Facebook page;ElectronicsArena.com

Maximum current rating: 30A Maximum voltage: 41V MOSFET on-resistance: 19mOhm Maximum PWM frequency: 20kHz Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino 14A, V is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors." Box Pack - No Warranty

Maximum current rating: 30A Maximum voltage: 41V MOSFET on-resistance: 19mOhm Maximum PWM frequency: 20kHz Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino 14A, V is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors."

maximum current rating: 30a maximum voltage: 41v mosfet on resistance: 19mohm per leg maximum pwm frequency: 20khz undervoltage and overvoltage shutdown the monster motor controller shield for arduino 14a, v is essentially a ramped up version of sparkfun s ardumoto motor driver shield. for this monster shield maufacturer has replaced the l298 h bridge with a pair of vnh2sp30 full bridge motor drivers. manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high current motors." Box Pack - No Warranty

maximum current rating 30a maximum voltage 41v mosfet on resistance 19mohm per leg maximum pwm frequency 20khz undervoltage and overvoltage shutdown the monster motor controller shield for arduino 14a, 5.5 16v is essentially a ramped up version of sparkfun s ardumoto motor driver shield. for this monster shield maufacturer has replaced the l298 h bridge with a pair of vnh2sp30 full bridge motor drivers. manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high current motors.

Maximum current rating: 30A • Maximum voltage: 41V • MOSFET on-resistance: 19mOhm (per leg) • Maximum PWM frequency: 20kHz • Undervoltage and overvoltage shutdown The Monster Motor Controller Shield For Arduino (14A, V) is essentially a ramped up version of Sparkfun's Ardumoto motor driver shield. For this monster shield maufacturer has replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. Manufacturer has also beefed up the support circuitry so this board is capable of driving a pair of high-current motors."

We have a wide range of Semiconductor ICs that include Microcontrollers, Operational and Instrumentation Amplifiers, Comparators, Power/Current Sensors, Energy Measurement, Analog to Digital (ADC) / Digital to Analog (DAC) Converters, RF Transceivers, Ethernet/USB/CAN/RS232/RS485 Interface, Memory (Serial and Parallel EEPROMs), MOSFETS, Motor Drivers, IGBT, Regulators, Battery Management, Charge Controllers, RTCs, and many other semiconductor ICs.

Description: Details iShopping.pk brings you the best price for Vaddio RoboSHOT 12 QMini System with express shipping all over Pakistan.     Features: • Pan / Tilt / Zoom Camera with CCU • Exmor 1/2.8" Full HD CMOS Sensor • Built-In Web Server for Setup & Control • Power/Video/Control on 2 x Cat-5 • Quick-Connect USB Interface Up to 100' • 720p/30 over USB   Vaddio's RoboSHOT 12 QMini System   is a professional quality PTZ camera with fine detail and quality color reproduction packaged with a Quick-Connect USB Control unit. It's suitable for small to medium-sized rooms, houses of worship, medium auditorium A/V systems, small to medium distance learning classrooms, live event theaters, and lecture theaters with lecture capture. The key features of the camera are Tri-Synchronous Motion; Range-Set for setting optical limits; and the combination of an advanced image sensor, lens, and ISP (image signal processor). Paired with the camera is the Quick-Connect USB Mini control unit, which uses the Vaddio EZCamera Cat-5 Cable System to transport HSDS (differential video), power, and control to and from the camera over standard Cat-5 cabling up to 100' in length with virtually no latency or loss in video quality. The USB Mini provides 720p/30 video over USB using UVC (Universal Video Class) drivers, so you can connect the device to your computer with confidence that it will work.    Specifications: Camera Image Sensor Exmor 1/2.8", 2.34 Megapixel, Full HD (1080p/60 native) High-speed, Low Noise CMOS Image Sensor Lens 12X Optical Zoom Supported Resolutions HD Resolutions: 1080p/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50/30/25; 16:9 format Miscellaneous                                                Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset Range-Set: Optical zoom limits on tele end and wide end Advanced ISP: Vivid and accurate color with fast and sharp automatic focus and iris routines S/N Ratio > 50 dB Minimum Illumination 1.0 lux (F1.8, 50IRE)  Recommended illumination: >100 lux Minimum Distance 0.4" (10 mm), wide end; and 2.6 ft (0.8 m), tele end Pan & Tilt Angles:  Pan: ±160°, Tilt: +90°, -30°  Speeds:  Pan/Tilt:.35 to 120°/sec Sync System Internal Control Method Ethernet: Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers Dimensions 6.94 x 7.05 x 6.76" (17.6 x 17.9 x 17.2 cm) Weight 4.85 lb (2.2 kg) Quick-Connect USB Interface (QMini) Video Output USB 2.0 (MJPEG): Resolution up to 720p/30 Connectors Power: 5.5 mm OD x 2.5 mm ID Coaxial Connector, Positive Center RS-232: RJ-45 Jack EZ-Power Video: RJ-45 Jack (Power and Differential HD Video) USB Interface Connector: Type-B, USB 2.0 Compliant, Standard UVC (Universal Video Class) Drivers Network Interface Ethernet over USB 2.0 Streaming Protocols USB 2.0, MJPEG (UVC standard drivers) Supported Web Browsers Chrome (latest release - auto updating) Firefox (latest release - auto updating) Internet Explorer (IE 8 to 11) Safari (Rev 6 and 7) CAT-5 Cable Distance Two Cat-5e cables (EZ-Power Video and RS-232) Max Distance up to 100' (30.48m) Power Supply 24 VDC, 2.08 A Switching Power Supply Operating Temperature 32 to 104°F / 0 to 40°C Dimensions 3.60 x 4.48 x 1.25" / 9.14 x 11.4 x 3.18 cm Weight 1.1 lb / 0.5 kg Packaging Info Package Weight 11.4 lb Box Dimensions (LxWxH) 13.622 x 12.126 x 11.89"

Product Specification: (1) Mega 2560 R3 Board (2) RAMPS1.4 is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the Arduino-compatible MEGA platform, RAMPS1.4 has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. (3) A4988 Stepper Motor Driver is built-in translator for easy operation (4) LCD 12864 with Controller contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display.

Description: Details iShopping.pk brings you the best price for Vaddio RoboSHOT 12 QUSB System with express shipping all over Pakistan.       Feautues: • Pan/Tilt/Zoom Camera with CCU • Exmor 1/2.8" Full HD CMOS Sensor • Built-In Web Server for Setup & Control • Power/Video/Control over Cat-5 • Quick-Connect USB Interface • Simultaneous HDMI & HD YPbPr Outputs • Streams MJPEG or H.264 over USB   Specifications: Camera Image Sensor Exmor 1/2.8", 2.34 megapixel, full HD (1080p/60 native) high-speed, low-noise CMOS image sensor Lens 12X optical zoom Supported Resolutions                        HD Resolutions: (16:9 format) 1080p/60/59.94/50/30/25 1080i/60/59.94/50 720p/60/59.94/50/30/25 Miscellaneous Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset  Range-Set: Optical zoom limits on tele end and wide end  Advanced ISP: Vivid and accurate color with fast and sharp automatic focus and iris routines S/N Ratio >50 dB Minimum Illumination 1.0 lux (F1.8, 50IRE)  Recommended illumination: >100 lux Minimum Distance 0.4" (10 mm), wide end; and 2.6 ft (800 mm), tele end Pan & Tilt Angles:  Pan: ±160°, Tilt: +90°, -30°  Speeds:  Pan/Tilt:.35 to 120°/sec Sync System Internal Control Method Ethernet: Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers Dimensions 6.94 x 7.05 x 6.76" (17.6 x 17.9 x 17.2 cm) Weight 4.85 lb (2.2 kg) Quick-Connect USB Interface (QUSB) Video Output USB 2.0 (MJPEG): Resolution up to 720p/30 (USB 2.0 MJPEG) H.264 (IP) on Ethernet: Resolution up to 1080p/30 (H.264 over IP) Analog Component (YPbPr): Resolution up to 1080p/60 HDMI: Resolution up to 1080p/60 Connectors Power: 5.5 mm OD x 2.5 mm ID Coaxial Connector YPbPr: DE-15 (15-pin VGA) Female HDMI: HDMI Female RS-232 IN: RJ-45 Jack RS-232 OUT: RJ-45 Jack EZ-Power Video: RJ-45 Jack (Power and Differential HD Video) CAT-5 Cable Distance Two Cat-5e cables (EZ-Power video and RS-232); max distance up to 100' (30.48 m) Power Supply 24 VDC, 2.08 A switching power supply Dimensions 8.38 x 6.00 x 1.72" / 21.3 x 15.2 x 43.69 cm Weight 1.4 lb / 0.64 kg   Vaddio's RoboSHOT 12 QUSB System is a professional quality PTZ camera with fine detail and quality color reproduction packaged with a Quick-Connect USB Control unit. It's suitable for small to medium-sized rooms, houses of worship, medium auditorium A/V systems, small to medium distance learning classrooms, live event theaters, and lecture theaters with lecture capture. The key features of the camera are Tri-Synchronous Motion; Range-Set for setting optical limits; and the combination of an advanced image sensor, lens, and ISP (image signal processor). Paired with the camera, the Quick-Connect USB control unit uses the Vaddio EZCamera Cat-5 Cable System to transport HSDS (differential video), power, and control to and from the camera over standard Cat-5 cabling up to 100' with virtually no loss in video quality or latency. The USB interface provides simultaneous HDMI and HD component output, or you can stream over the USB output using MJPEG or H.264. The interface supports universal USB drivers, so you can connect the device to your computer with confidence that it will work.