Eeprom

Description: The AT24C01A/02SC/04SC/08SC/16SC provide bits of serial, electrically-erasable, and programmable read-only memory (EEPROM) organized as words of 8 bits each. The devices are optimized for use in smart card applications where low-power and low-voltage operation may be essential. The devices are available in several standard ISO smart card modules (see Ordering Information, pages ). All devices are functionally equivalent to Atmel serial EEPROM products offered in standard IC packages (PDIP, SOIC, TSSOP, MAP), with the exception of the slave address and write protect functions, which are not required for smart card applications. Features: Chip: AT24C02 Size: 1.9 x1.1 (CM) Storage tool for EEPROM with I2C interface Main resource: AT24CXX,12C pin header" Box Pack - No Warranty

Description: The AT24C01A/02SC/04SC/08SC/16SC provide bits of serial, electrically-erasable, and programmable read-only memory (EEPROM) organized as words of 8 bits each. The devices are optimized for use in smart card applications where low-power and low-voltage operation may be essential. The devices are available in several standard ISO smart card modules (see Ordering Information, pages ). All devices are functionally equivalent to Atmel serial EEPROM products offered in standard IC packages (PDIP, SOIC, TSSOP, MAP), with the exception of the slave address and write protect functions, which are not required for smart card applications. Features: Chip: AT24C02 Size: 1.9 x1.1 (CM) Storage tool for EEPROM with I2C interface Main resource: AT24CXX,12C pin header Box Open - Never Used - No Warranty

Features • High-performance, Low-power AVR® 8-bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz • High Endurance Non-volatile Memory segments – 64K Bytes of In-System Self-programmable Flash program memory – 2K Bytes EEPROM – 4K Bytes Internal SRAM – Write/Erase cyles: Flash/ EEPROM(1)(3) – Data retention: 20 years at 85°C/100 years at 25°C(2)(3) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security • JTAG (IEEE std. Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel, 10-bit ADC Differential mode with selectable gain at 1x, 10x or 200x – Byte-oriented Two-wire Serial Interface – One Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF • Speed Grades – ATmega644V: 0 - 4MHz @ V, 0 - 10MHz @ V – ATmegaMHz @ V, 0 - 20MHz @ V • Power Consumption at 1 MHz, 3V, 25°C for – Active: 240 µA @ 1.8V, 1MHz – Power-down Mode: 0.1 µA @ 1.8V Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

description: programmable read only memory eeprom organized as words of 8 bits each. the devices are optimized for use in smart card applications where low power and low voltage operation may be essential. the devices are available in several standard iso smart card modules see ordering information, pages . all devices are functionally equivalent to atmel serial eeprom products offered in standard ic packages pdip, soic, tssop, map, with the exception of the slave address and write protect functions, which are not required for smart card applications. features: chip: a size: 1.9 x1.1 cm storage tool for eeprom with i2c interface main resource: at24cxx,12c pin header

description: the at24c01a 02sc 04sc 08sc 16sc provide bits of serial, electrically erasable, and programmable read only memory eeprom organized as words of 8 bits each. the devices are optimized for use in smart card applications where low power and low voltage operation may be essential. the devices are available in several standard iso smart card modules see ordering information, pages . all devices are functionally equivalent to atmel serial eeprom products offered in standard ic packages pdip, soic, tssop, map, with the exception of the slave address and write protect functions, which are not required for smart card applications. features: chip: at24c02 size: 1.9 x1.1 cm storage tool for eeprom with i2c interface main resource: at24cxx,12c pin header" Box Pack - No Warranty

description the at24c01a 02sc 04sc 08sc 16sc provide 1024 2048 4096 8192 16384 bits of serial, electrically erasable, and programmable read only memory eeprom organized as 128 256 512 1024 2048 words of 8 bits each. the devices are optimized for use in smart card applications where low power and low voltage operation may be essential. the devices are available in several standard iso 7816 smart card modules see ordering information, pages 12 13. all devices are functionally equivalent to atmel serial eeprom products offered in standard ic packages pdip, soic, tssop, map, with the exception of the slave address and write protect functions, which are not required for smart card applications. features chip at24c02 size 1.9 x1.1 cm storage tool for eeprom with i2c interface main resource at24cxx,12c pin header

Product Description GPS APM2.5 NEO-6M Module With EEPROM To Save Data With Active Antenna The GPS module, 3V-5V power supply universal Ublox NEO-6M module with ceramic margin with antenna, signal strength With data backup battery With power failure data storage EEPROM The size of the antenna mm Box Pack - No Warranty

SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit programming SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit programming on USB Programmer TL866CS TL866A EZP2010 Other types of programmer and similar items are also available on our web. Website http://electronicspanga.com

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com Neo 6M GPS Module Features u-blox NEO-6M onboard, with high-gain active antenna IPX interface, for connecting different active antennas Chargeable backup battery, keeps the ephemeris data when power down, supports hot starts Onboard EEPROM for storing config information Specifications TTL level, compatible with 3.3V/5V systems Default baud rate 9600, configurable via u-center

This low-cost mini USB CH341A Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. CH341A Programmer is  equipped with CH 341A chip, can automatically recognize 25 series chip, and its 24/25 series indicator lamp enables the user to easily recognize the module’s working status. This CH341A Programmer is awesome and user-friendly because it supports USB to TTL conversion and the SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily.

Onboard 8P-chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; on-board pull-up resistor for I2C communications required; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 36.5 (mm) x12 (mm) Website http://electronicspanga.com

SUPERRO 610p programmer SUPERRO 610p programmer Features: Fastest Cheapest Programmer: With ARM7 MCU it gives ultra-fast programming experience. Programs devices with Vcc as low as 1.2V Built-in 48 universal pin drivers CE and ROHS Compliant Detailed Features: Supports IC devices from 169 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 64Mb EEPROM in 43 seconds. Built with 48 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages. The programmer operates in either PC hosted mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (%) enhances programming reliability. Provides over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows 7 & Vista & XP bit Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip insertion in Production Mode. The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. The Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. A Log file provides quality tracking. SUPERRO 610p programmer Speed Comparison Device Program + Verify (Sec) Compare with SPU Type AT28C64B 0.8(P)+0.1(V)= 0.9(s) 1.2(P)+0.8(V)= 2.0(s) 64Kb EEPROM 24AA(P)+1.8(V)= 4.5(s) 5.0(P)+4.0(V)= 9.0(s) 128Kb EEPROM QB25F640S33B(P)+14.4(V)= 43.4(s) 55.2(P)+41.4(V)= 96.6(s) 64Mb EEPROM AT89C55WD 2.5(P)+0.4(V)= 2.9(s) 3.3(P)+1.0(V)= 4.3(s) 20KB FLASH MCU S25FL064A 43.9(P)+14.7(V)= 58.6(s) 72.8(P)+41.4(V)= (s) 64Mb SPI EEPROM PIC16F876A 10.1(P)+0.8(V)= 10.9(s) 22.1(P)+06.2(V)= 28.3(s) PIC18F(P)+1.1(V)= 6.2(s) 13.6(P)+06.7(V)=20.3(s) SUPERRO 610p programmer Device Updates XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. Warranty Support Standard 2 Years Warranty: Included with purchase of SuperPro 500P. Covers device update and repair. Xeltek pays Fedex GND when shipping product back to customer for US only. It doesn't apply for international customers. Programmer is warranted to be free of manufacturing or workmanship defects for two years from the date of purchase. For technical support, you may use ticketing system, live chat or forum; you may also give us a call during our business hours Monday through Friday, from 8:00am to 4:30pm (PST). Hardware & Electrical Specifications Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,… PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 90V- 250V, Hz; DC Output: 12V/2A; power 15W Main unit: Dimensions 70mm (L) * 52mm (W) * 15mm (H) Weight 0.85 lbs (0.4Kg) Package: Dimensions 150mm (L) * 120mm (W) * 30mm (H) Weight 3 lbs (1.4Kg) Items Included SuperPro 610p Programmer with a DIP48 Adapter AC adapter Software CD Optional Accessories: Adapter in various packages USB 2.0 Interfaced, ultra-high speed economy universal device programmer

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps ~ bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V~5.5V, typically 5V. Interface: UART (5V TTL) and SPI (3.3V TTL) Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Box Pack - No Warranty

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Facebook page;ElectronicsArena.com

Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 4K Bytes of In-System Self-programmable Flash program memory – 256 Bytes EEPROM – 512 Bytes Internal SRAM – Write/Erase cyles: Flash/ EEPROM – Data retention: 20 years at 85°C/100 years at 25°C() – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Six PWM Channels – 8-channel 10-bit ADC in TQFP and QFN/MLF package – 6-channel 10-bit ADC in PDIP Package – Programmable Serial USART – Master/Slave SPI Serial Interface – Byte-oriented 2-wire Serial Interface (Philips I2C compatible) – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Interrupt and Wake-up on Pin Change • Special Microcontroller Features – DebugWIRE On-Chip Debug System – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated Oscillator – External and Internal Interrupt Sources – Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby • I/O and Packages – 23 Programmable I/O Lines – 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF • Operating Voltage: – V for ATmega48V/88V/168V – V for ATmega • Temperature Range: – -40°C to 85°C • Speed Grade: – ATmega48V/88V/168V: 0 - 4 MHz @ V, 0 - 10 MHz @ V – ATmega MHz @ V, 0 - 20 MHz @ V • Low Power Consumption – Active Mode: 250 µA at 1 MHz, 1.8V 15 µA at 32 kHz, 1.8V (including Oscillator) – Power-down Mode: 0.1µA at 1.8V Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Box Pack - No Warranty

features highly integrated analog circuitry to demodulate and decode responses supports iso ieca mifare typical operating distance in reader writer mode for communication to a iso ieca mifare is mm supports mifare classic encryption in reader writer mode supports iso ieca higher transfer speed communication up to 848kbit s control by serial uart interface: baud rate could be bps bps, with default baud rate bps with the chip iso, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply: 4.5v 5.5v, typically 5v. interface: uart 5v ttl and spi 3.3v ttl size: 40mm x 50mm usage baud rate could be bps bps

features highly integrated analog circuitry to demodulate and decode responses supports iso ieca mifare typical operating distance in reader writer mode for communication to a iso ieca mifare is mm supports mifare classic encryption in reader writer mode supports iso ieca higher transfer speed communication up to 848kbit s control by serial uart interface: baud rate could be bps bps, with default baud rate bps with the chip iso, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply: 4.5v 5.5v, typically 5v. interface: uart 5v ttl and spi 3.3v ttl size: 40mm x 50mm usage baud rate could be bps bps" Box Pack - No Warranty

visit electronicspangadotcom Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFAR-E Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFAR-E is mm Supports MIFAR-E Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps ~ bps, with default baud rate bps With the chip ISO, it supports MIFAR-E standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance ROSH: Lead-free Code available for free on demand.

features highly integrated analog circuitry to demodulate and decode responses supports iso iec14443a mifare typical operating distance in reader writer mode for communication to a iso iec14443a mifare is 40 50 mm supports mifare classic encryption in reader writer mode supports iso iec14443a higher transfer speed communication up to 848kbit s control by serial uart interface baud rate could be 2400bps 115200bps, with default baud rate 9600bps with the chip iso14443, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply 4.5v 5.5v, typically 5v. interface uart 5v ttl and spi 3.3v ttl size 40mm x 50mm usage baud rate could be 2400bps 115200bps

visit electronicspangadotcom Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IEC14443A/MIFAR-E Typical operating distance in Reader/Writer mode for communication to a ISO/IEC14443A / MIFAR-E is 40~50 mm Supports MIFAR-E Classic encryption in Reader/Writer mode Supports ISO/IEC14443A higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps With the chip ISO14443, it supports MIFAR-E standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance ROSH: Lead-free Code available for free on demand.

GE-SFP, LC Connector lX/LH Transceiver  Tech Data Description: CISCO GE SFP LC CONN LX LH XCVR CONFIG ONLY The GLC-LH-SM is a long haul or long wavelength SFP module ( nm nominal), for use in BASE-LX links. Use only the SFP modules with your Modular Fast Ethernet line card. Each SFP module contains an internal serial EEPROM that is security-programmed by the SFP manufacturer with information that provides a way for Cisco (through the Cisco IOS software) to identify and validate the SFP module as a module type that was tested and qualified by Cisco to operate properly with Cisco Modular Fast Ethernet line cards. Main Specifications Product Description Cisco SFP (mini-GBIC) transceiver module Device Type SFP (mini-GBIC) transceiver module - LC Enclosure Type Plug-in module Cabling Type Base-LH Data Transfer Rate 1 Gbps Data Link Protocol Gigabit Ethernet Compliant Standards IEEE z Designed For Cisco V3PN, V3PN, VAM2+; Catalyst ST, G, S, G, E, G, VX, G, ; Catalyst Express G; CSS ; ME ; Supervisor Engine 720, II-Plus-TS General Device Type SFP (mini-GBIC) transceiver module Enclosure Type Plug-in module Networking Connectivity Technology Wired Cabling Type Base-LH Data Link Protocol Gigabit Ethernet Data Transfer Rate 1 Gbps Compliant Standards IEEE z Expansion / Connectivity Interfaces 1 x network - Ethernet Base-LH - LC x 2 Compatible Slots 1 x SFP (mini-GBIC) Compatibility Information Designed For Cisco Integrated Services Router Branch Office in a Box Bundle, Integrated Services Router Secure WAN Optimization Bundle, Integrated Services Router WAN Application Acceleration Bundle, Integrated Services Router WAN Optimization Bundle, Integrated VoiceVideo, Voice Security Bundle, Integrated Services Router Branch Office in a Box Bundle, Integrated Services Router WAN Application Acceleration Bundle, Integrated Services Router WAN Optimization Bundle, Secure WAN Optimization Bundle, Voice Security Bundle, ITP Signaling Gateway Bundle, VAM2+ Router Security Bundle Cisco Catalyst LC-S, LT-L, PC-L, PC-S, -S, TC, TC-L, TC-S, TT, PST-L, PST-S, T, TC, TC-L, TC-S, TT, TT-L, TT-S, TC, TC-S, G-24TC, G-48TC, G-8TC, PD-8TT-L, S-24PD-L, S-24PS-L, S-24TD-L, S-24TS-L, S-24TS-S, S-48FPD-L, S-48FPS-L, S-48LPD-L, S-48LPS-L, S-48TD-L, S-48TS-L, S-48TS-S, G-24TS-E, PC, PC-S, TS, TS EMI, TS SMI, TS, TS EMI, TS SMI, PC, E-12D, E-12SD-E, E-12SD-S, E-24PD, E-24TD, E-48PD, E-48PD-F, E-48TD, E-48TD-SD, G-24PS EMI, G-24PS SMI, G-24TS EMI, G-24TS SMI, G-G-48PS EMI, G-48TS EMI, V2-24PS, V2-24TS, V2-24TS-SD, V2-48PS, V2-48TS, X-24P-L, X-24P-S, X-24T-L, X-24T-S, X-48PF-L, X-48PF-S, X-48P-L, X-48P-S, X-48T-L, X-48T-S, FS, G-12S, G-12S-S, G-24PS-E, G-24PS-S, G-48PS-E, G-48PS-S, G-48TS-E, G-48TS-S, Series Supervisor Engine V-10GE Cisco Catalyst Express LC, PC, 500G-12TC Cisco ME TS, TS, GE, Ethernet Switc Condition: - Warranty: 1 Months

Physical_Attributes Dimensions (width x height x depth): 187 x 112 x 11 millimetres 7.4 x 4.4 x 0.4 inches Bounding:Volume: cubecentimetres Mass: 355 grams (battery included) Software_Environment Embedded+Operating+System: Google Android 3.2 and update possibility to 4.0 Browse devices running this OS Operating-System-Kernel: Linux Microprocessor,+Chipset CPU:Clock: MHz CPU: Ingenic Jz Browse devices based on Jz Width-of+Machine;Word: 32 bit CPU-Core: MIPS XBurst Level+1-cache: 16KiB data cache / 16 KiB instruction cache Level-2:cache: 256 KiB Instruction:Set: MIPS I, MIPS II Memory,-Storage-capacity RAM_type: DDR2 SDRAM RAM;capacity: 512 MiB ROM:type: Flash EEPROM ROM_capacity: MiB ROM-capacity:in+bytes: 8 GB (billion bytes) Graphical:subsystem Display:Type: Supported Display+Color-Depth: 24 bit/pixel ( scales) Display_Diagonal: millimetres) Display+Resolution: 800 x pixels) Viewable:Display_Size: 6.01 " x x millimetres) Pixel+density-(dot:pitch): pixel/inch ( millimetre/pixel) Graphical_Controller: Vivante GC860 Video-out: xp) resolution HDMI Type C (HDMI 1.3) connector Audio_Subsystem Audio_Channel(s): stereo sound Microphone(s): mono sound Loudspeaker(s): stereo sound Audio+Output: 3.5mm plug Control;Peripherals Positioning-Device: Multi-touch screen Primary;Keyboard: Not supported Directional_Pad: Not supported Scroll_Wheel: Not supported Interfaces Expansion-Interfaces: microSD, microSDHC, TransFlash Supports High Capacity (SD 2.0/HC) memory cards with capacity of up to 32GB USB: USB 2.0 host/client, Hi-Speed (480Mbit/s), USB On-The-Go 1.3 compliant USB Series Micro-B (Micro-USB) connector Bluetooth;(): Not supported Wireless:LAN/Wi-Fi;(): IEEE b, IEEE g, IEEE n Internal antenna Infrared-Gate: Not supported Multimedia:Broadcast Analog+Radio: Not supported Digital:Media;Broadcast: Not supported Built-in_Digital:Camera Sensor-Type: CMOS sensor Resolution: x pixels (1.92MP) Autofocus_(AF): Not supported Macro-Mode: Not supported Built-in;Flash: Not supported Camcorder: 0x0 pixels Recordable_Image-Formats: JPG Recordable+Video-Formats: 3GP Power:Supply Battery:Technology: Lithium-ion battery Battery;Build: built-in Estimated-Battery_Life: 10 hours Battery:Capacity: mAh Estimated-Average:Current: 400 mA Additional_Details Built-in+accelerometer: Supported Additional+Features: capacitive touchscreen 5-point multi-touch For Review please check this Video http://www.youtube.com/watch?v=QPgPxqSnWsw Any qusetion your have just ask: Box Pack - No Warranty

Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz Phone no:

Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz -

Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz Phone no: Box Pack - No Warranty

Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz - Box Pack - No Warranty

Summary Warning: Don't power the LilyPad Arduino with more than 5.5 volts, or plug the power in backwards: you'll kill it. Microcontroller ATmega328V Operating Voltage V Input Voltage V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA Flash Memory 32 KB (of which 2 KB used by bootloader) SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz" Box Pack - No Warranty

Specifications: Microcontroller Atmel ATmega328 Operating Voltage (logic level) 5 V Input Voltage (recommended) 7-12 V Input Voltage (limits) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz Dimensions 0.73"" x 1.70""" Box Pack - No Warranty