Channels motor

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Raterecognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used to control the motors at Box Pack - No Warranty

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used Box Pack - No Warranty

Features - Controlling MCU power supply 6.5-12 V or 3.5-5.5V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate 9600,19200,28400,57600,115200,128000recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate recognized a d to control the motors at the same time,more than 5 Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wirel Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply V or V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted Box Pack - No Warranty

Descriptions - This is the newly upgraded controller board. - Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication TTL serial port of MCU 51, AVR, ARM, FPGA, PIC, etc. to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation. Features - Powerful MCU - High controlling accuracy - Offline operation function - Identify baud rate automatically Specifications - Controlling MCU power supply 6.5-12 V or 3.5-5.5V. USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 32. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART.

keep the air plane or quadcopter stable 6 PWM input channels for standard receiver or PPM SUM receiver -Up to 8-axis motor output -Supported 2-axis gimbal and auto trigger controll -FTDI/UART port for upload firmware, debug, Bluetooth module or LCD display -I2C port for extend sensor, I2C LCD/OLED display or I2C-GPS NAV board for GPS and Sonar -Ultra low noise 3.3V LDO voltage regulator -ATMega 328P Microcontroller -MPUC 6 axis gyro/accel with Motion Processing Unit -HMCL 3-axis digital magnetometer -BMP085 digital pressure sensor -PCADP1 logic level converter" Box Pack - No Warranty

keep the air plane or quadcopter stable 6 PWM input channels for standard receiver or PPM SUM receiver Up to 8-axis motor output Supported 2-axis gimbal and auto trigger controll FTDI UART port for upload firmware, debug, Bluetooth module or LCD display I2C port for extend sensor, I2C LCD/OLED display or I2C GPS NAV board for GPS and Sonar Ultra low noise 3.3V LDO voltage regulator ATMega 328P Microcontroller MPUC 6 axis gyro/accel with Motion Processing Unit HMCL 3-axis digital magnetometer BMP085 digital pressure sensor PCADP1 logic level converter" Facebook page;ElectronicsArena.com Box Pack - No Warranty

keep the air plane or quadcopter stable 6 PWM input channels for standard receiver or PPM SUM receiver Up to 8-axis motor output Supported 2-axis gimbal and auto trigger controll FTDI UART port for upload firmware, debug, Bluetooth module or LCD display I2C port for extend sensor, I2C LCD/OLED display or I2C GPS NAV board for GPS and Sonar Ultra low noise 3.3V LDO voltage regulator ATMega 328P Microcontroller MPUC 6 axis gyro/accel with Motion Processing Unit HMCL 3-axis digital magnetometer BMP085 digital pressure sensor PCADP1 logic level converter" Facebook page;ElectronicsArena.com

keep the air plane or quadcopter stable 6 pwm input channels for standard receiver or ppm sum receiver up to 8 axis motor output supported 2 axis gimbal and auto trigger controll ftdi uart port for upload firmware, debug, bluetooth module or lcd display i2c port for extend sensor, i2c lcd oled display or i2cgps nav board for gps and sonar ultra low noise 3.3v ldo voltage regulator atmega 328p microcontroller mpuc 6 axis gyro accel with motion processing unit hmcl 3 axis digital magnetometer bmp085 digital pressure sensor pcadp1 logic level converter" Box Pack - No Warranty

IMPORTED FROM SINGAPORE Key Features ARM® 32-bit Cortex® -M3 CPU Core 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division Memories 64 or 128 Kbytes of Flash memory 20 Kbytes of SRAM Clock, reset and supply management 2.0 to 3.6 V application supply and I/Os POR, PDR, and programmable voltage detector (PVD) 4-to-16 MHz crystal oscillator Internal 8 MHz factory-trimmed RC Internal 40 kHz RC PLL for CPU clock 32 kHz oscillator for RTC with calibration Low-power Sleep, Stop and Standby modes VBAT supply for RTC and backup registers 2 x 12-bit, 1 μs A/D converters (up to 16 channels) Conversion range: 0 to 3.6 V Dual-sample and hold capability Temperature sensor DMA 7-channel DMA controller Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs Up to 80 fast I/O ports 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode Serial wire debug (SWD) & JTAG interfaces 7 timers Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 16-bit, motor control PWM timer with dead-time generation and emergency stop 2 watchdog timers (Independent and Window) SysTick timer 24-bit downcounter Up to 9 communication interfaces Up to 2 x I2 C interfaces (SMBus/PMBus) Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) Up to 2 SPIs (18 Mbit/s) CAN interface (2.0B Active) USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK®