Battery tester

Don't Guess Which Batteries to Keep and Which to throw Away. Try our battery tester with Easy to read display Views: 1

www.facebook.com/aslam.electric.company -Can check 12V Accumulator. -No polarity when testing. -Ready stock.

BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test.

BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test. SIMPLE TO USE: completely portable; outside power not required; complete test done in 30 seconds Visit our facebook page: http://www.facebook.com/aslam.electric.company

www.facebook.com/aslam.electric.company BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test.

Price: Seller Type: An Individual Condition: New Instant check for lead acid and gel battery Condition. Trisco brand. Made in Taiwan Call me at: .

Extech BR50: Video Borescope/Camera Tester 17mm camera diameter and 2.4" Color TFT LCD Monitor BR50 is a Video borescope and camera tester with a 17mm camera diameter and 2.4 in. Color TFT LCD Monitor. Can also test installed surveillance cameras for correct target alignment. Applications include: Home inspection: Inspect in walls for mold, insect infestation, electrical wire or water pipe location; HVAC: Inspect inside ducts, behind motors and compressors; Automotive: View inside or around engines and transmissions; Government: Safety and security inspections; Industrial: Inspect weld integrity, process equipment, gears, molding machines; Aerospace: Aircraft inspections for contamination, debris, cracks or other damage. Comes complete with rechargeable Lithium battery, and Universal AC adapter and charger with USB cable. Features • 17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape • Four LED lamps with five brightness levels illuminate the viewed object • Glare-free close-up field of view with 480 x 234 pixel display • Automatically detects NTSC and PAL cameras • Complete with rechargeable Lithium battery, and Universal AC adapter/charger with USB cable Specifications Range Camera Sensor size ¼" CMOS Sensor pixels 300,000 Maximum frame rate 30 FPS Color resolution 24 Bit Focusing method Fixed focus 15cm to 25cm (5.9" to 9.8") Gooseneck length 1m (39") Camera diameter 17mm (0.66") LCD Display 2.4" Color LCD Display resolution 480 (W) X 234 (H) pixels Active area 48mm x 35.6mm (1.9 x 1.4") Light Source 4 LEDs Adjustable light intensity 6 illumination levels Video format NTSC/PAL (automatic conversion) Power Rechargeable 1800mAH lithium battery Current consumption 400mA max. Standby current 5mA max. Low battery warning Voltage falls below 3.3V Enviormental Operating Temperature 32°F ~ 122°F (0°C ~ 50°C) Relative Humidity 85% max.

Digital/analogue megger Mastech MS is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC CAT II V standard. The measurement results are shown by means of a big pointer indicator with a mirror scale meant for increasing of measurement accuracy. The digital display shows output voltage. Since the insulation resistance testing requires high voltage (up to 2,5 kV), the Mastech MS uses a double confirmation system for test setup and control over operation. The case ofDigital/Analogue Insulation Tester MASTECH MS is dampproof. The tester is powered from 8 x AA 1,5 V batteries and 1 x 6F22 9 V battery. Features: Designed according to the IEC standard CAT II V Analogue and digital display Inner battery test function is provided Double test switch is to avoid inncorrect operation Unique design is to protect inner circuit from wet and cankerous air The instrument tests insulation up to MΩ at V Insultation resistance accuracy (analog display): MΩ ± MΩ/ MΩ ±3.0% Automatic range control Output voltage (digital display): V± MΩ) Battery powered: 1.5 V (UM3, AA) x 8, 9 V (6F22) x 1 Size: 225 x 135 x 81 mm

R510D Digital Battery Load Tester (Full 100amp Load) Quickly identifies problems in battery, electrical or charging systems. Features: 0 to 16 volt digital scale with separate 6 & 12 volt colour coded zones. Provides precise and rapid tests on battery conditions on or off the car with a 2% accuracy. Heavy duty cable, copper plated clamps, stainless housing. Instructions are listed on back label. Size: " x 4.3/8" x x 110 x 57mm)

R510D Digital Battery Load Tester Full 100amp Load Quickly identifies problems in battery, electrical or charging systems. Features 0 to 16 volt digital scale with separate 6 12 volt colour coded zones. Provides precise and rapid tests on battery conditions on or off the car with a 2 accuracy. Heavy duty cable, copper plated clamps, stainless housing. Instructions are listed on back label. Size x 4.38 x x 110 x 57mm Box Pack

FEATURES Test Condition Without Shutting Down Battery. Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. Auto-hold and Auto-data storage. Comparator Function. Rates Conditions as Pass, Warning, or Fail. Memory and Read Function Compact and Lightweight. USB PC Interface APPLICATIONS Storage Battery Systems Battery Capacity Testers, Check battery condition in seconds, with the battery in service! SPECIFICATION Battery Types Tested Compact storage batteries, Alkali and lead-acid batteries.. Battery Capacity: 0 to 1200AH Resistance Ranges: 4m?, 40m?, 400m?, 4?, 40?, 400? Resolution: 1??, 10??, 100??, 1m?, 10m?, 100m? Accuracy: 4m??±(3% reading ±20digits) ? 40m?~400??±(0.8% reading ±6digits) Measurement Condition Current: Approx. 40mA, 4mA, 400?A, 40?A, 4?A Frequency: 1KHz±30Hz DC Voltage Range: 6V, 60V Resolution: 1mV, 10mV Accuracy: ±(0.1%rdg ±6digits) Temperature? Range: -20? to 60? (-4? to 140?) Resolution: 0.1? / 0.1? Accuracy: ±1? / ±1.8? DC Current Range: 60A, 600A Resolution: 0.01A, 0.1A Accuracy: 60A: ±(2%rdg 20dgt), 600A: ±(2%rdg 2dgt) Open Circuit Voltage: 5V max Manual Data Memory: 999 data sets Continuous Data Memory: 6000 data sets (only use PC download) Comparator Setting: Resistance upper and lower limits and voltage throughold limit. Memory: 99 sets of values. Operating Environment: 0? to 40? (32? to 104?), 80%RH or less, non- ondensing. Maximum Input Voltage: 60VDC Power Supply or AC Adapter: Six AA size 1.5V alkaline batteries Battery Life: 5.5 hours Weight Approx. 530g including batteries Dimensions Approx. 198(L) × 94(W) × 49(H)mm Accessories: Clip type test lead with temperature sensor, Pin – type test lead, 3092CP DCA current adaptor, Zero adjustment board, Instruction manual, batteries, AC adaptor, USB cable, CD PC software, Carrying case. Further queries please feel free to contact us. Thank You. | Mohammad Nasir | | Cell:0300-2713798 | |FRIENDS |RADIO CORPORATION | | Gul-e-Rana Building, Sarmad Road, Saddar Karachi |

This ESR meter can be used to test electrolytic capacitors without removal from the circuit. Microprocessor Controlled and probe resistance set to zero correction, Automatic gain correction. Use LiFePO4 battery,Built-in charging module. Need not replacement battery. Short press: power on Long press?about 1sond):power off Double press changes ESR/DCR Specification: Range: 0.00 – 25 ? Capacitance range: >0.47uf Accuracy: ± 1% + 1 digit Frequency: 100 KHz Test signal: Square pulse Protection: 400V DC Power drain: 80mw (Auto power off about 5 minutes) Battery: LiFePO4 3.2v (included) Dimensions: 125x80x32 (mm) Other meters are also available. Check our website. Views: 21

1.LED lead acid battery BMS capacity indicator voltage meter. 2.Can display the battery power you can also plug directly into the phone or the 5V equipment charging. 3.Suitable for all kinds of outdoor power mobile power instrumentation and other equipment additional battery power voltage display and additional USB to charge the phone and other functions. 4.Uses synchronous rectification step-down chip scheme with little heat energy saving and environmental protection. 5.Small size and light weight. Descriptions: 1.Fine workmanship and good performance. 2.Easy to read easy to use durable in use.

CD610 MILWAUKEE SPECIFICATIONS Range 0 to ppm Resolution 100 ppm Accuracy ±2% Full Scale Temperature Compensation from 5 to 50°C Environment 0 to 50°C / 32 to 122°F; max RH 95% Battery Type 4 x 1.5V, alkaline (included) Battery Life approx. 350 hours of continuous use Dimensions 150 x 30 x 24 mm

Price: Seller Type: An Individual Condition: New Range?Resolution? Sound and light alarm"beep - beep - beep -" alarm sound, Flashing alarm symbol, By AL key to open, close, setLCD4-digital LCD, mm in lengthWorking temperature-20ºC -55ºC Relative Humidity%Explosion-proof markExia BT3ShiftAutomatic ShiftingExternal Magnetic Field 1KHzThe Measured Current FrequencyHz AutomatismStorable Measurement Data99groupsSetting Range of Resistance Alarm Critical Value ?Protection LevelDouble insulationStructural FeatureIn the jaw way CTPower Source6VDC (4×5# alkaline battery)Span of Jaw28mmNet Weight (including batteries)gDimension285mm long, 85mm wide,56mm thickAccessoriesMeter:1 PCS; Test Ring:1 PCS; Meter Box:1 PCS

Price: 950 Seller Type: An Individual Condition: New "Features: Diode and Buzzer function Low battery indication Overload protection Data hold for easy reading This meter uses Large Scale Integration and unique function circuits It can measure AC Voltage,DC Voltage,AC Current,resistance,diode,and fulfill audible continuity test Multi-use 3 1/2 Digital LCD with a Max. reading of AC Current: Range 10mA ~ 20A, 100mA ~ 200A, 1A ~ 400A. Overload protection: 400A on all ranges. AC Voltage: Range 1V ~ 450V. Overload protection: 450V AC on all ranges. DC Voltage: Range 1V ~ 600V. Overload protection: 600V DC / (peak AC) on all ranges. Diode Test, Continuty test, Resistance measurements,Transistor P-N junction test. Continuity test with buzzer sound while

MS Mastech Description The meter is a portable specialized measuring instrument with a large digital LCD,as well as a backlight source for easy reading. The range selector designedfor single-hand operation makes measurement easy. Overload protection and low battery indicationare provided. It is an ideal multi-functional instrument with scores of practical applicationsfor professional, factory, school, amateur and home use. Features Large Counts LCD Display Built-in Non-Contact Voltage Detector Tests DCAC Voltage and Current, Resistance, Diode and Continuity Check Net Cables T568A, T568B, 10Base-T Identify the state of the telephone line Busy, Ringing or clear Tone Function Diagnose the break points of cables MAX and Data Hold Display Back Light Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 w w w.matrixelectronic. com Email sales matrixelectronic. com Box Pack

MS Mastech Features Analog Display Earth resistance by constant current inverter 800Hz2mA Measures Voltage to Earth Inner Battery Test Now Buy Online Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 w w w.matrixelectronic. com Email sales matrixelectronic. com Email info matrixelectronic. com Box Pack

Features: 100% Brand new and high quality! This instrument is a multi-functional handheld cable testing tool. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person. Work perfectly when RJ11 RJ45 cable is on power Wire Tracing: Trace RJ11, RJ45, cables or other metal wire (via adapter). Easy and fast to locate the breakpoint without opening the wire’s cover. Network cable collation: Judge short-circuits, breaking the circuit, open circuit, and crossing. Test line level, positive and negative polarity. Status of telephone line checking: Test the working status of the telephone line (idle, ringing, and off-hook) and judge TIP and RING line. Check wire continuity. Specifications: Temperature Operating temperature: 0 °C ~ 40 °C, maximal 80% relative humidity (non-condensing) Storage temperature:-10~50°C, maximal 80% relative humidity (non-condensing, battery not included) Altitude: Views: 2

BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test. SIMPLE TO USE: completely portable; outside power not required; complete test done in 30 seconds Visit our facebook page: http://www.facebook.com/aslam.electric.company Contact Info: Ptcl: 042- Ptcl: 042-

This USB Charger Current Voltage Charging Detector battery Tester Volt meter Ammeter Can easily measure the operating current of the output voltage of the USB port and equipment 2. smallsize, no power, and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users.

Product Description Multi-purpose Digital Clamp Multimeter that can measure AC current, AC Voltage, DC Voltage, Resistance, Data hold function and indicator LED that detects Live Wire (Tester Function). High Accuracy & Superior Reliable Digital Multimeter, designed for use by electricians, technicians, serviceman and hobbyists, etc. Features 3 & 1/2 digits LCD with a Max. reading of AC Current Clamp Meter (20A, 200A, 600A) Voltmeter (600VAC, 600VDC) Ohm Meter (2K, 200K, 2M) Data Hold Function for easy reading Manual Ranging Automatic Polarity Display (DC V only) Automatic Over-range Indication Automatic Low Battery Indication Sampling 2 Readings per Second Power Supply: 2x 1.5V Size AAA battery (NOT Included)