Battery tester indicator

Don't Guess Which Batteries to Keep and Which to throw Away. Try our battery tester with Easy to read display Views: 1

www.facebook.com/aslam.electric.company -Can check 12V Accumulator. -No polarity when testing. -Ready stock.

BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test.

BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test. SIMPLE TO USE: completely portable; outside power not required; complete test done in 30 seconds Visit our facebook page: http://www.facebook.com/aslam.electric.company

www.facebook.com/aslam.electric.company BATTERY TESTER: test 6 or 12 volt batteries; hardtop batteries, discharged batteries and maintenance free batteries; also built in starter test.

Price: Seller Type: An Individual Condition: New Instant check for lead acid and gel battery Condition. Trisco brand. Made in Taiwan Call me at: .

Product introduction: 1 Intelligent electricity display board; just push trigger switch, it will auto power off display after 3 seconds 2. Static power consumption 2.3MA, and it is ignored 3. Plug in indicator light color: 25% red, 3 other green Four. Application field: Battery charge detection; must be connected separately battery charge board positive and negative positive and negative. With a slight push trigger switch, the current electricity can be detected and divided into a battery. Comprehensive capacity divided into 4 phases of quantity. Slight push switch, the amount of electricity is displayed Electrical display display: 25% fast light (voltage: 6.6 V); 50% second light (voltage: 7 V); 75% third light (voltage: 7.5 V); 100% fourth light (Voltage: 8 V) 5. Size: 44 * 9 * 7.5 mm Package included: 1 x 1 2 3 4 Serial Lithium Battery Capacity Indicator 1 2 3 4 18650 Lithium Batteries for Battery Level Indicator Board Views: 16

Price: Seller Type: An Individual Condition: Used Sony DCR-VX E (from official specification sheet ) Description Specification System Format (SO Digital-Video) * TV-Standard CCIR – Ntsc Lens / Camera Part Image Device (Size / Pixel, gross / net) 3x 1/3' CCD / () Min. Illumination / Recommended Illumination 4 Lux (0.1 Lux Slow Shutter) > 100 Lux Zoom / Digital Zoom 6 10x / 20x Manual Zoom / Motor Zoom - / * Motor Zoom Speed Control (Variable / Steps) * / - F Lens Data 1:1.6 Steady Shot (electronic / optical) Optical (Super) Focus System Full Range Inner Focus Focus Mode (Normal / Infinity) * / * Manual Focus (Ring / Dial) * / - Push Autofocus / Macro Autofocus * / * Built-In Lens Cover / Built in ND Filter - / * Filter Diameter 52 mm Function Camera Part White Balance (auto / man.) * / * (Indoor / Outdoor / One push) * / * / * Iris-/ Gain Control (man.) - / - Iris- / Gain Control via Exposure * Shutter Control (man.) * Shutter Speed: Detail Steps sec Slow Shutter: Detail Steps and 1/25 sec Program AE (Steps) 3 (Priority Iris, Priority Shutter, Twilight) Fader (Black / Overlap / Wipe) * / * / - Zebra Pattern Option * Photo Mode Recording * Effect Generator: - Picture Effects - 16:9 Wide Record Mode) • (Full) Date / Time Data Code Viewfinder Colour LCD Viewfinder (Size Pixel) Information Sub-panel * EVF (Fixed / Movement) * / - Player Part Functions (Play / Stop / Rew FF / Pause) * Still Picture / Noiseless * Digital Still Picture * Time Base Corrector * 16:9 Convert in 4:3 (P13) * Time Code / Extended Data Code * / * Interval Record / Frame Record * / * Interval Waiting-/ Recording Time 30 sec; 1 min; 5 min; 10 min / sec Self Timer (Waiting Time) • (10 / 2 sec) Date/Time- and Photo Search • (List via Cassette Memory) LCD Function -Display * Tape-/ Battery Remaining Indicator * / * Menu Options / Edit Switch * / - Insert Edit (Zero-Memory) * Audio Part PCM-Digital Stereo Alive * Low Cut Filter (Wind Noise Reduction) • auto. Record Level (auto / man.) * / * Audio Level Meter • (via LCD) Connectors In/Out Video In / Out (RCA) in/Out || - / * Audio In / Out (RCA) - / * DV-Out (Digital Out) - / * Lanc (Remote / Control L) - / * Ext. Microphone Jack (Mini Jack) incl. Power Out • (3,5 mm) 2,5 – 3V Separate DC-Out for ext. Microphone - (RFU DC–Out, 5V) Headphone Out • (3,5 mm) General Data Power Supply V / DC Power Consumption 9,5 W Operation Temperature 0° – 40° C Dimensions (WxHxD) 110x144x329 mm Weight (Without Tape / Battery) g Supplied Accessories Charge / Power Adapter • AC–V V, AC) Recharg. Battery Type • (NP-720/Lithium]on) Remote Commander • (RMT-803) DV-Mini-Cassette • (DV–M 60) AV Cable / Scant Adapter / S-Video Cable • (Stereo) Shoulder Strap / Wrist Strap Belt * / - Battery for Commander 2x R6 Lens Cap / Sun Shade (LCD) * / - References

Battery charger for NB-5L lithium battery 100V AC to 240V AC input voltage range AC plug input connector Charge status indicator light Small, lightweight size

Battery Specifications: Type: Rechargeable Battery Color: Black Capacity: 4800mAh Compatible with: FOR Xbox 360 wireless controller Charging Cable Specifications: Type: USB charging cable Color: Black Length: 4.7ft LED light indicator Compatible with: FOR Xbox 360 wireless controller

Digital/analogue megger Mastech MS is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC CAT II V standard. The measurement results are shown by means of a big pointer indicator with a mirror scale meant for increasing of measurement accuracy. The digital display shows output voltage. Since the insulation resistance testing requires high voltage (up to 2,5 kV), the Mastech MS uses a double confirmation system for test setup and control over operation. The case ofDigital/Analogue Insulation Tester MASTECH MS is dampproof. The tester is powered from 8 x AA 1,5 V batteries and 1 x 6F22 9 V battery. Features: Designed according to the IEC standard CAT II V Analogue and digital display Inner battery test function is provided Double test switch is to avoid inncorrect operation Unique design is to protect inner circuit from wet and cankerous air The instrument tests insulation up to MΩ at V Insultation resistance accuracy (analog display): MΩ ± MΩ/ MΩ ±3.0% Automatic range control Output voltage (digital display): V± MΩ) Battery powered: 1.5 V (UM3, AA) x 8, 9 V (6F22) x 1 Size: 225 x 135 x 81 mm

1.LED lead acid battery BMS capacity indicator voltage meter. 2.Can display the battery power you can also plug directly into the phone or the 5V equipment charging. 3.Suitable for all kinds of outdoor power mobile power instrumentation and other equipment additional battery power voltage display and additional USB to charge the phone and other functions. 4.Uses synchronous rectification step-down chip scheme with little heat energy saving and environmental protection. 5.Small size and light weight. Descriptions: 1.Fine workmanship and good performance. 2.Easy to read easy to use durable in use.

Extech BR50: Video Borescope/Camera Tester 17mm camera diameter and 2.4" Color TFT LCD Monitor BR50 is a Video borescope and camera tester with a 17mm camera diameter and 2.4 in. Color TFT LCD Monitor. Can also test installed surveillance cameras for correct target alignment. Applications include: Home inspection: Inspect in walls for mold, insect infestation, electrical wire or water pipe location; HVAC: Inspect inside ducts, behind motors and compressors; Automotive: View inside or around engines and transmissions; Government: Safety and security inspections; Industrial: Inspect weld integrity, process equipment, gears, molding machines; Aerospace: Aircraft inspections for contamination, debris, cracks or other damage. Comes complete with rechargeable Lithium battery, and Universal AC adapter and charger with USB cable. Features • 17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape • Four LED lamps with five brightness levels illuminate the viewed object • Glare-free close-up field of view with 480 x 234 pixel display • Automatically detects NTSC and PAL cameras • Complete with rechargeable Lithium battery, and Universal AC adapter/charger with USB cable Specifications Range Camera Sensor size ¼" CMOS Sensor pixels 300,000 Maximum frame rate 30 FPS Color resolution 24 Bit Focusing method Fixed focus 15cm to 25cm (5.9" to 9.8") Gooseneck length 1m (39") Camera diameter 17mm (0.66") LCD Display 2.4" Color LCD Display resolution 480 (W) X 234 (H) pixels Active area 48mm x 35.6mm (1.9 x 1.4") Light Source 4 LEDs Adjustable light intensity 6 illumination levels Video format NTSC/PAL (automatic conversion) Power Rechargeable 1800mAH lithium battery Current consumption 400mA max. Standby current 5mA max. Low battery warning Voltage falls below 3.3V Enviormental Operating Temperature 32°F ~ 122°F (0°C ~ 50°C) Relative Humidity 85% max.

This usb cable triad tester comes with three ports of type-c, mini usb, and micro-usbIt is capable of capable of testing out open circuit, short-circuit, wire welding error and other problems of data wireBee cue and indicator lights remind you of fault typesAdvanced chip makes sure precise measurement

Price: Seller Type: An Individual Condition: Used Feature: The most important feature of this solar charge controller is simple PWM design, low cost, heavy duty microcontroller based design, available BOOST / trickle charging to control the voltage & current according to batteries: a)    Solar Charger Micro-controller intelligent Fully automatic system b)   Day/Night switch for Street light OR Auto ON/OFF system in day (means LOAD OFF in a full day due to sun light power detector system) or night (means LOAD ON in a full Night or sun light power not available in this time). c)    Flout & Boost charging option d)    BOOST Flout: Charging option 14.2 for boost & Flout for % full battery charging. e)    LBCO Low Battery Cut OFF; disconnect the load when battery potential low. f)     Low Battery protection: Low battery cut-off for safe to load 10.5VDC for 12V battery. g)    Reverse diode protection. h)    Charging indicator show the battery charging & battery potential gradually increases. i)     When Solar connect in a day or sun rise SOLAR ON indicator glow. Means sufficient power available for battery charging. j)     Available from single battery 12VDC to 32-Battery bank system 384VDC, with all full options. k)    Compact Design fits Your Working Environment Open circuit voltages as compare to desire charging for a Battery 12V max open circuit voltages = 19VDC/20VDC Applications: This solar charger suitable for following types of solar applications: a)    Street Light. b)   Solar home light/ garden light. c)    Battery Charging from the P.V Solar module. d)    Low Battery protection, may be used for sensitive equipment like medical, I.T related computer base systems & etc… Indicator: (Picture 1) start from left to right. Day/Night mode means select a street light auto on/off function, when solar panels generate the power means sun light available then load automatically off. When sun light not available or solar panels not generating the power the load/street light automatically on. Load indicator, bright indicate there is output, Load could work, “off” indicate there is not output, and Load can not work. This is normal phenomenon. When the battery voltage recovers to 12.6V or (25.2v), the Load will be automatically working, at this time the indicator is off. 3. Charger Indicator cct, red; bright indicate the voltage of the battery is require to charge OR Charger circuit ready to charge the battery in solar available. Charging Indicator, green, bright indicate the battery need to charge OR on charging, flickering means float charging, off means charge has stop. Solar indicator means solar energy available. Available at Karachi Pakistan pls call or visit at ARDL (Anosha Research & Development electronics Lab): Lab-2 LS-43 Bolck-15 Dastagir Society Karachi-, ,