X5 advantages

Description 4 Customizable Sensor Sensitivity Performance Switches on the back Unique Advantages System without Software 3-Level Lift Off Distance Setting Switch: 1.5mm/2mmm/3mm Personal Customizable CPI Switch: 100~16,000 CPI 4-Report Rates Switch: 125/500/1000/2000 Hz 5 Default Preset CPI Switch: 400-800-1000-1600-3200 CPI 1ms Key Response 12 RGB Lighting Effects Infrared Wheel Premium Anti-Slip Grip Handling

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis