Transmitting power

Features -FPV 5.8G 200mW A/V Transmitting/receiving System, a good choice for avoiding interference for customers using 2.4G radio system. TSG 200mW AV wireless transmitter Transmitter frequency:MHz;8CH Transmitting Power:200mW/23dBm Transmitting distance::m(open area) Frequency control:built-in frequency and phase lock loop AV input:analog AV signal input ANT connector:SMA(inside the needle) Power supply: volts Current supply:200mA Size:mm Net weight:43g Gross weight:52g Details of channel frequencies of the transmitter: CH CH CH CH CH CH CH CH Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX RCG wireless AV receiver Receiving frequency:MHz;8CH Receiving sensitivity:-90dBm Frequency control:built-in frequency and phase lock loop Double lines AV output:analog AV signal output Antenna connector:SMA(Inside the needle) Power supply voltage: 5-12V Supply current: 150mA Dimension: mm(aluminium alloy extrusion profiles) Gross weight:120g Item Packing -TS351 Transmitting unit X 1 -RC305Receiving unit X 1 -Wire x 1 Set" Box Pack - No Warranty

Features -FPV 5.8G 200mW AV Transmittingreceiving System, a good choice for avoiding interference for customers using 2.4G radio system. TSG 200mW AV wireless transmitter Transmitter frequencyMHz8CH Transmitting Power200mW23dBm Transmitting distancemopen area Frequency controlbuilt-in frequency and phase lock loop AV inputanalog AV signal input ANT connectorSMAinside the needle Power supply volts Current supply200mA Sizemm Net weight43g Gross weight52g Details of channel frequencies of the transmitter CH CH CH CH CH CH CH CH Note TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX RCG wireless AV receiver Receiving fr Box Pack - No Warranty

Features -FPV 5.8G 200mW AV Transmittingreceiving System, a good choice for avoiding interference for customers using 2.4G radio system. TSG 200mW AV wireless transmitter Transmitter frequencyMHz8CH Transmitting Power200mW23dBm Transmitting distancemopen area Frequency controlbuilt-in frequency and phase lock loop AV inputanalog AV signal input ANT connectorSMAinside the needle Power supply volts Current supply200mA Sizemm Net weight43g Gross weight52g Details of channel frequencies of the transmitter CH CH CH CH CH CH CH CH Note TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX Box Pack - No Warranty

Features -FPV 5.8G 200mW AV Transmittingreceiving System, a good choice for avoiding interference for customers using 2.4G radio system. TSG 200mW AV wireless transmitter Transmitter frequencyMHz8CH Transmitting Power200mW23dBm Transmitting distancemopen area Frequency controlbuilt-in frequency and phase lock loop AV inputanalog AV signal input ANT connectorSMAinside the needle Power supply volts Current supply200mA Sizemm Net weight43g Gross weight52g Details of channel frequencies of the transmitter CH CH CH CH CH CH CH CH Note TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX RCG wireless AV receiver Receiving frequencyMHz8CH Receiving sensitivity-90dBm Frequency controlbuilt-in frequency and phase lock loop Box Pack - No Warranty

Description: Details iShopping.pk brings you the best price for Dahua 10-Port Unmanaged Desktop Switch with 8-Port PoE (PFS3010-8ET-96) with 1 Year Official Warranty and express shipping all over Pakistan.   Detail: Designed for commercial use, the DH-PFS3010-8ET-96 10-Port Fast Ethernet PoE+ Switch from Dahua comes with a total PoE power budget of up to 60W so you can plug PoE compliant devices to any of the eight Fast Ethernet PoE+ ports. Alongside the eight Fast Ethernet ports, you will find dual Gigabit Ethernet uplink ports to connect various network components directly to the switch. Once configured, the Dahua switch resides on Layer 2 of the network and supports a variety of network standards including 802.3, 802.3u, 802.3X, 802.3af, and 802.3at. Furthermore, this PoE switch is capable of transmitting power and data at distances of up to 820' to give you maximum flexibility when configuring your devices. • Layer 2 commercial switch • Long-distance PoE (LD PoE) transmits power and data 820' • Conforms to IEEE802.3, IEEE802.3u and IEEE802.3X • Conforms to IEEE802.3af and IEEE803.3at • Supports Hi-PoE (60W) • MAC auto-learning and aging; 16K MAC address capacity • MDI/MDIX self-adaptation • Metal enclosure   Specifications: Hardware Ethernet Port 8 Optical Port 0 Ethernet Port Speed 100 Mbps Data Transmission Port Port 1–8: 8 × RJ-45 10/100 Mbps (PoE) Port 9-10: 2 × RJ-45 10/100/1000 Mbps (Uplink) Power Supply 53V DC Operaing Temperature –10°C to +55°C (+14°F to +131°F) Operating Humidity 5%–95% (RH) Storage Temperature –20°C to +70°C (–4°F to +158°F) Storage Humidity 5%RH–95%RH Power Consumption Idling: 3.0W Full load: 96W Performance Capacity 5.60 Gbps Packet Forwarding Rate 4.17 Mpps Packet Buffer Memory 4 Mbit MAC Table Size 8K Communication Standard IEEE802.3, IEEE802.3u, IEEE802.3X, IEEE 802.3ab PoE PoE Standard IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt PoE Power 96W Power Consumption Management Yes PoE Pin Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Long Distance PoE 250 m long distance PoE transmission General Statics Protection Air discharge: 8kV Contact discharge: 6kV Thunder-proof Common mode: 4kV Differential mode: 2kV

Description The XBee-PRO 900 RF module is ideally suited for less power-hungry, low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, The XBee-900 modules have a higher selectable transmitting power of 250mW. This higher Tx power allows for line-of-sight range up to 28 miles with the right antenna. It is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application. As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi’s Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands. 900MHz VS 2.4GHz Most of the Xbee modules operate at 2.4GHz, but there are a few that operate at 900MHz. Basically, 900MHz can go a lot farther with a high gain antenna (up to 15miles for the Pro modules and a high gain antenna). Also the lower the frequency the greater penetration the signal has. 900MHz is also not allowed in many countries (although there are 868MHz versions available from Digi that are allowed in many other countries). You can NOT mix and match these on the same network. Hardware Processor: ADF transceiver, Cortex-M3 EFM32G MHz Programmable includes: Freescale MC9S08QE32 Frequency Band： 902 to 928 MHz, software selectable channel mask for interference immunity Performance RF Data Rate： 10 Kbps or 200 Kbps Indoor/Urban Range： 10 Kbps: up to ft (610 m); 200 Kbps: up to ft (305 m) Outdoor/ Line-Of-Sight Range： 10 Kbps: up to 9 miles (14 km); 200 Kbps: up to 4 miles (6.5 km) (w/ 2.1 dB dipole antennas) Transmit Power： Up to 24 dBm (250 mW) software selectable Receiver Sensitivity： -101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps Features Data Interface： UART (3V), SPI GPIO： Up to 15 Digital I/O, 4 10-bit ADC inputs, 2 PWM outputs Networking Topologies： DigiMesh, Repeater, Point-to-Point, Point-to-Multipoint, Peer-to-Peer Spread Spectrum： FHSS (Software Selectable Channels) Programmability Memory： N/A 32 KB CPU/Clock Speed： N/A Power Supply Voltage 2.1 to 3.6 VDC C Transmit Current 215 mA Receive Current 29 mA Sleep Current 2.5 uA Physical Properties Weight: 6.4g Size: 3.3cm x 2.5cm (4.5 x 2.5cm with connector) Antenna： RPSMA Package list: 1 x XBee PRO S3B RPSMA antenna" Box Pack - No Warranty

Description The XBee-PRO 900 RF module is ideally suited for less power-hungry, low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, The XBee-900 modules have a higher selectable transmitting power of 250mW. This higher Tx power allows for line-of-sight range up to 28 miles with the right antenna. It is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application. As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digis Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The modules default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands. 900MHz VS 2.4GHz Most of the Xbee modules operate at 2.4GHz, but there Box Pack - No Warranty

Description The XBee-PRO 900 RF module is ideally suited for less power-hungry, low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, The XBee-900 modules have a higher selectable transmitting power of 250mW. This higher Tx power allows for line-of-sight range up to 28 miles with the right antenna. It is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application. As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digis Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The modules default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands. Box Pack - No Warranty

Description The XBee-PRO 900 RF module is ideally suited for less power-hungry, low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, The XBee-900 modules have a higher selectable transmitting power of 250mW. This higher Tx power allows for line-of-sight range up to 28 miles with the right antenna. It is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application. As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digis Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The modules default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands. 900MHz VS 2.4GHz Most of the Xbee modules operate at

Working Range: Max. 10m (Barrier Free) Transmitting Power: Max. +5dB Working Voltage: 3.3V Working Current: <50mA Sleep Current: <1mA Compatible System: for Window 2000/XP/7 Features: Portable, with Touchpad, Ergonomic.

infrared emission sensor module for arduino starters compatible ky 005. infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. it is to be able to convert electrical energy directly into near infrared light not visible and radiation out of the light emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. infrared leds are typically used gallium arsenide gaas, aluminum gallium arsenic gaalas, and other materials, the use of transparent or light blue, black resin encapsulation. launch distance and angle 15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c, the intensity of light emission, wavelength. above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. small power transmitting tube forward voltage: v, current 20 ma, in power for the forward voltage: v ma, high power tubes for the forward voltage: v ma. yu star electronics to make 1 10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting" Box Pack - No Warranty

Infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light (not visible) and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide (GaAs), aluminum gallium arsenic (GaAlAs), and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle (15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c), the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: V, current 20 ma, in power for the forward voltage: V ma, high-power tubes for the forward voltage: V ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting" Box Pack - No Warranty

Infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light (not visible) and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide (GaAs), aluminum gallium arsenic (GaAlAs), and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle (15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c), the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: V, current 20 ma, in power for the forward voltage: V ma, high-power tubes for the forward voltage: V ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting"

infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light not visible and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide GaAs, aluminum gallium arsenic GaAlAs, and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle 15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c, the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: V, current 20 ma, in power for the forward voltage: V ma, high-power tubes for the forward voltage: V ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting" Facebook page;ElectronicsArena.com Box Pack - No Warranty

infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light not visible and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide GaAs, aluminum gallium arsenic GaAlAs, and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle 15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c, the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: V, current 20 ma, in power for the forward voltage: V ma, high-power tubes for the forward voltage: V ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting" Facebook page;ElectronicsArena.com

” Infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light (not visible) and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide (GaAs), aluminum gallium arsenic (GaAlAs), and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle (15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c), the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: 1.1-1.5 V, current 20 ma, in power for the forward voltage: 1.4-1.65 V 50-100 ma, high-power tubes for the forward voltage: 1.5-1.9 V200-350 ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting”

  " Infrared Emission Sensor Module For Arduino Starters Compatible KY-005. Infrared transmitting tube, also known as infrared light emitting diode, as part of the diode. It is to be able to convert electrical energy directly into near-infrared light (not visible) and radiation out of the light-emitting device, mainly used in all kinds of photoelectric switch and remote transmission circuit. Infrared transmitting tube structure, the principle of similar to ordinary light emitting diode, just use different semiconductor materials. Infrared leds are typically used gallium arsenide (GaAs), aluminum gallium arsenic (GaAlAs), and other materials, the use of transparent or light blue, black resin encapsulation. Launch distance and Angle (15 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees, 180 degrees c), the intensity of light emission, wavelength. Above for the physical parameters, it is necessary to understand its electric performance parameters, on the market commonly used 3 mm in diameter, 5 mm for small power infrared transmitting tube, 8 mm, 10 mm for the power and high power tube. Small power transmitting tube forward voltage: 1.1-1.5 V, current 20 ma, in power for the forward voltage: 1.4-1.65 V 50-100 ma, high-power tubes for the forward voltage: 1.5-1.9 V ma. Yu star electronics to make 1-10 w high power infrared transmitting tube can be applied to the infrared monitoring lighting"

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

The sensor module is adaptable to ambient light and is not affected by outside light. 2. The board has a multi loop precision adjustable potentiometer, which can be adjusted according to the use environment. The adjustment range is from 3cm-100cm. 3. Because it is a reflection principle, with a reflection of specific objectives, can adjust according to the situation. 4. There is a green LED on the circuit board. When the obstacle is detected, the luminescent OUT output continues to be low, and the barrier free is the continuous high level of the OUT output. Features: 1. Super micro, and design the mechanical installation hole. 2. Less power consumption, wide working voltage range. Use modulation signal transmitting, distance, anti-interference performance is good, can work under outdoor not direct sunlight (distance will be shorter). 3. Range from 3cm to 100cm. 4. The obstacle avoidance using the window technology, avoid the problem of critical region, sensors work is stable, the user directly using the output signal, signal jitter don’t need to consider. 5. The sensor is active infrared reflection detection, so the reflectivity and shape of the target is the key to detect distance. 6. The black detection distance is the smallest, the white is the largest, the small area objects are small distance and the large area distance is large. Specifications: Mechanical rigidity: Flexibility Number of layers: single side Base material: Copper Working voltage: 3.8V-5.5V Working current (5V): typical current is 6mA Obstacle detection time (effective detection range from the non-obstructing target to the presence of an obstacle, or the obstruction to the obstacle course to disappear): Detection range (test environment, room, maximum power, voltage 5v, power consumption 6.5 mA) White walls: approx. 100cm IBM black computer cover: approx. 20cm/7.87” One finger: approx.18cm/7.08” Palm: approx.30cm/11.81” A transparent original bead pen: approx.20cm/7.87” How does it work? The sensor fires infrared light, which is detected by reflected light, and if it detects an obstacle, the OUT foot outputs 0, otherwise 1. Module Interface: 1. VCC external DC3.8V-5.5V power source (can be directly with 5V single chip). 2. GND external DC3.8V-5.5V power supply anode. 3. OUT small digital output interface (0 and 1). Package Content: 1 x Infrared Digital Obstacle Avoidance Sensor Module 1 x M2 Screws Set

Description: Details iShopping.pk brings you the best price for Vivotek V Series 2MP Outdoor Vandal Resistant Network Bullet Camera (IB8367A) with 1 year international warranty and express shipping all over Pakistan.     Specification: Camera Image Sensor 2 MP 1/2.9" progressive scan CMOS sensor Maximum Resolution 1920 x 1080 Lens Type Varifocal, manual Focal Length 2.8-12mm Aperture f/1.4-2.4 Iris DC-Iris Field of View Horizontal: 100.6-36.2° Vertical: 54.9-20.4° Diagonal: 103.1-38.3° Shutter Time 1/5 to 1/32,000 sec WDR Technology WDR enhanced Day/Night IR cut filter Minimum Illumination Color: 0.05 lux at f/1.4 B&W: 0.01 lux at f/1.4 Pan/Tilt/Zoom ePTZ: 48x digital zoom (4x on IE plug-in, 12x built-in) Number of IR LEDs and Range 10 x IR LEDs, up to 98' (30 m) Onboard Storage microSD/SDHC/SDXC card slot System Information CPU Multimedia SoC (system-on-chip) Flash 128 MB RAM 256 MB Video Compression H.264 and MJPEG Maximum Frame Rate 30 fps at 1920 x 1080 In both compression modes Maximum Streams 4 simultaneous streams Signal to Noise Ratio (SNR) 65 dB Dynamic Range 69.4 dB Video Streaming Adjustable resolution, quality, and bit rate Smart Stream II Image Settings Adjustable image size, quality, and bit rate Time stamp, text overlay, flip & mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface RJ45 10Base-T/100Base-TX Ethernet ONVIF Supported Intelligent Video Video Motion Detection Five-window video motion detection Alarm and Event Alarm Triggers Motion detection, manual trigger, periodical trigger, system boot, recording notification, camera tampering detection Alarm Events Event notification using digital output, HTTP, SMTP, FTP, NAS server, and microSD card File upload via HTTP, SMTP, FTP, NAS server, and microSD card System Requirements Operating System Microsoft Windows 8, 7, Vista, XP, 2000 Web Browser Mozilla Firefox 7-43 (streaming only) Internet Explorer 7, 8, 9, 10, 11 Other Players VLC: 1.1.11 or above  QuickTime: 7 or above General Connectors RJ45 LED Indicator System power and status indicator Power Input IEEE 802.3af PoE Class 0 Maximum Power Consumption 10 W Casing Metal IP Rating IP66 IK Rating IK10 Safety Certification CE, LVD, FCC Class A, VCCI, C-Tick Operating Temperature Starting Temperature: 14 to 122°F (-10 to 50°C) Working Temperature: -4 to 122°F (-20 to 50°C) Humidity 0.9 Dimensions (Ø x H) 2.8 x 13" (72 x 327 mm) Weight 2.4 lb (1.1 kg)   Product Description: •  1920 x 1080 Resolution at 30 fps •  Low Light Recording at 98' Range •  2.8-12mm Varifocal Lens •  103.1-38.3° Diagonal Field of View •  microSD Card Slot for Edge Storage •  RJ45 Ethernet Connection with PoE •  ONVIF-Compliant •  IP66- and IK10-Rated for Outdoor Use   Product Overview: Monitor an outdoor area with the IP66- and IK10-rated  V Series IB8367A 2MP Outdoor Vandal-Resistant Network Bullet Camera  from  Vivotek. It has a 2.8-12mm varifocal lens with a 103.1-38.3° diagonal field of view to capture 1080p video at up to 30 fps. It features IR LEDs to capture low-light images from up to 98' away, while enhanced WDR and SNV technology further help produce accurate images in varying lighting conditions. PoE technology reduces the need for additional cable runs by transmitting both data and power over a single Ethernet cable. •  2MP 1/2.9" progressive scan CMOS sensor captures 1920 x 1080 resolution video at up to 30 fps •  IR LEDs, WDR enhanced, and SNV technology for low-light imaging •  2.8-12mm varifocal lens has a 103.1-38.3° diagonal field of view to monitor medium-sized areas •  Smart IR technology to avoid overexposure and Smart Stream II to optimize bandwidth efficiency •  3D Noise Reduction •  IP66-rated for outdoor use •  IK10-rated for impact and vandal resistance

Description: Details iShopping.pk brings you the best price for ClearOne Connect CobraNet Network Bridge with express shipping all over Pakistan.   The Connect CobraNet bridge provide networked audio for CONVERGE Pro devices without changing main mixer hardware.   Features: • 8 x 8 I/O audio extends system boundaries, transmitting audio channels through network •  Modular approach allows you to build your system over time •  Acts as an end-point device for the network, with up to 8 units on each expansion bus   Specifications: General Device Type Audio extender Form Factor External Networking Connectivity Technology Wired Max Transfer Distance 328 ft Status Indicators Power, status Expansion / Connectivity Interfaces 1 x (input) - RJ-45 female 1 x (output) - RJ-45 female 1 x Ethernet 10/100 - RJ-45 female Power Power Device External power adapter Voltage Required AC 120/230 V (50/60 Hz) Dimensions & Weight Width 5.7 in Depth 5.8 in Height 1.7 in Environmental Parameters Min Operating Temperature 32 °F Max Operating Temperature 104 °F Humidity Range Operating 0 - 90%

Description: Details iShopping.pk brings you the best price for ClearOne Connect Dante Network Bridge with express shipping all over Pakistan.   Features: • Extends system boundaries by transmitting audio through network •  Supports all CONVERGE PRO and CONVERGE SR family of products •  Connects with CONVERGE products via Link ports •  Supports 8x8 dante audio channels •  No audio processing performed in the bridge •  Makes CONVERGE PRO and SR units work with CONVERGE MATRIX for audio mixing, routing, distribution •  Provides digital audio interface to CONVERGE products •  Modular approach allows building a scalable system over time   Specifications: General Device Type Audio extender Form Factor External Networking Connectivity Technology Wired Data Link Protocol 100 Gigabit Ethernet Max Transfer Distance 328 ft Status Indicators Power, status Expansion / Connectivity Interfaces 1 x (input) - RJ-45 female 1 x (output) - RJ-45 female 1 x (primary) - RJ-45 female 1 x (secondary) - RJ-45 female 1 x Ethernet 10/100 - RJ-45 female Power Power Device External power adapter Voltage Required AC 120/230 V (50 - 60 Hz) Dimensions & Weight Width 1.7 in Depth 5.8 in Height 5.7 in Environmental Parameters Min Operating Temperature 32 °F Max Operating Temperature 104 °F

Name: wireless transmitter, wireless bridge, wireless transceiver, network transceiver, Ethernet transceiver, IP transceiver, data transceiver Type: audio video data transceiver, RF transceiver, digital AV transceiver, audio video wireless bridge Application: used in the UAV/UAS/Quadcopter/Octocopter/ hexacopter high-speed moving transmission in complex environments. Details: Data: RS232 RS422, RS485 Ethernet/IP/network: RJ45 HD interface:HDMI Frequency: 2.4GHz Distance: 1-10km Modulation: COFDM/TDD-COFDM Mode: TDD, full duplex, two way data Transmission: audio, video, data, two-way, P2P (point-to-point), p2mp (point to multipoint), LOS (line of sight), NLOS (non line of sight), mobile Features: 1. Military-grade digital zero delay(around 10ms) HDMI ethernet transceiver 2. TDD duplex mode 3. Excellent sensibility 4. High RF output power 5. Well safety performance 6. Point to point and point to multi-point transmission 7. Remote control 8. Good diffraction ability 9. Wide coverage 10. High transfer rate 11. Strong anti-interference and anti-fading ability 12. Transparent protocol 13. Confidentiality 14. Proprietary data scrambling encryption Model COFDM AW (Sold by set including transmitter and receiver) Power Supply DC7V-17V Consumption 9W Video in/out HDMI, RJ45 Ethernet, support 1080P, 720P, 576, 480 Note: HDMI for transmitting end, RJ45 for receiving end Data in/out Standard RS232/RS485/RS422 Frequency Output 2405MHz-2470MHz, step in 1MHz (other frequencies can be customized) RF power output 20dBm-30dBm (100mW-1000mW) (adjustable) Working bandwidth 4MHz/8MHz Encryption 128 bit AES, and user-defined password Error correction mechanism 32 bit of CRC、ARQ Modulation TDD-COFDM、time division duplex mode Parameter Control adjustable parameters through the OLED panel Working temperature -20℃-75℃ Dimension 85mm*28mm*51mm Weight 151g

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Single-Mode Media Converter (MC210CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Extends fiber distance up to 9.3 miles (15km) Ports 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 1000BASE-LX Single-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.8W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC210CS is a media converter designed to convert 1000BASE-LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 9.3 miles (15km).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Multi-Mode Media Converter (MC100CM) with 18 months official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 1.2 miles (2km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Multi-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Single-Mode Media Converter (MC110CS) with official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 12.5 miles (20km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km).