Training automation

Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary from Oct 26th

EESINT is arranging Professional Training sessions on SIEMENS PLC, HMI, and SCADA/V.F.D/Matlab/Arduino/Android application and Web Development in Islamabad and Lahore,Pakistan. We have complete software and hardware, first class demo kits and complete Range of Training Kits which no one else has such authorized set-up in Pakistan. We believe in quality, therefore, training will be delivered by our Industrial professionals having vast experience in the field of automation. This workshop provides complete knowledge of process and manufacturing industries and significance of automation controllers in those Industrie. Also, we provide training on web development and android application Fresh Graduates, Electrical, Electronics,DAE,software engineers, and computer science students are encouraged to attend this workshops. This workshops will also help in Final year projects of students working. For Further Details Call/SMS: Islamabad: 0302-8383212 0303-4851212 Lahore: 0301-8541212 0307-7761212 Certificates will be awarded on completing the training. Registrations can also be done On-line: PLC,HMI, and SCADA: https://docs.google.com/forms/d/1YQiO2tUuy7d6C9ndLHvCrj_sLayTNnzYd83jSdOVrYg/viewform?fbzx=-4413006116788686558 Web and Android: https://docs.google.com/forms/d/1dTc_kQr212oZ1eVVuT16Pp53HCg5fm1NnCMnRPPNJAU/viewform Matlab: https://docs.google.com/forms/d/1-V01b7pKzi4q9DyBpqE254Zbcdhc8T5LvRCGf7cQZi0/viewform?usp=send_form Arduino: https://docs.google.com/forms/d/1oB94auyWmkYHhfy_4G4lmGDHb26FFrY3AjirryfZB44/viewform?usp=send_form#start=invite Facebook Page: https://www.facebook.com/ElectricalEngineeringSolutionsInternational

OISOL Pvt Ltd is conducting training on “Test Automation using Selenium on 3rd & 10th January . Trainer: Mr. Abid Munif Khan Duration: 2 Full days Timing: 9:30am to pm Course Fees: Rs. /- Discounts Available For More info: Training Coordinator

Training on Test Automation using Selenium- Regression Testing Course Contents: • Introduction to Selenium • Installation • Getting Started with Selenium IDE Quick start • Locators • Getting Started with Selenium IDE • Overview of Selenium Web Driver Introducing Page Object • Web Drivers • Working with Selenium API • Controlling Test Flow • Data-driven testing • Testing on Mobile Devices Schedule: 13th & 20th Aug,2016 Trainer: Mr. Abid Munif Khan Duration: 2 Full days Timing: 9:30am to 05:30pm Course Fees: Rs. 20,000/- 10% on early bird payment Get registered by filling this form: https://docs.google.com/…/15XVZspkXuuHyjFWZMY8mc_-…/viewform For more info: Training Executive Email: aroosa.suleman@safertech.net almas.shoaib@safertech.net trainings@safertech.net Call: 021-34380762, 0348-2229740 Views: 48

HP unified functional testing training by UFTOnlineTraining.netdeliver end to end solutions with UFT quick automation QTP tool. UFT training allows you to test collaborative tests to perform GUI and Non GUI tests. This is an advanced automation tool in testing industry to improve product quality and collaboration. It reduces the complex issues occurred while test process and simplifies the multiple test scripts. You are able to write scripts and apply them on multiple devices with our training. We provide very reliable and consistent training to convert manual tests to automations tests in simple steps. Our learners are successfully completes training and working as automation software professionals in to companies. QTP professionals are rendering learning by applying practical concepts with theoretical training to address the challengesin testing and providing a solution with UFT tool. A single testing solution to test multiple application layers with standardized testing course learning. Salient features of UFT training: · Hands on lab exercises to practice · Adequate illustration for each topic · Coverage of basic topics to advanced scripting · Able to learn to test multiple tests at a time · Simple process to do regression testing · Very quick and easy testing methods with UFT · Blogs to find unlimited material on testing concepts · Best practices form testing industry Contact us: http://www.uftonlinetraining.com/qtp-uft-online-training/ Email: [email protected] Call: 229-234-8977

PMP Training: Training Modules: Starter: Assessment Exam Session 1: PMP Overview Session 2: Introduction Session 3: Project Life Cycle and Organization Session 4: Project Management Processes for a Project Session 5: Project Integration Management Session 6: Project Scope Management Session 7: Project Time Management Session 8: Project Cost Management Session 9: Project Quality management Session 10: Project Human Resource Management Session 11: Project Communications Management Session 12: Project Risk Management Session 13: Project Procurement Management Session 14: Project Stakeholder Management Session 15: Mock Exam, Case Study Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | WordPress | Graphics

SINA Institute of Networks and Aesthetics, The State of the Art Training Center, was established in Feb, 2010. Asp.Net Training: Module Details Module 1 • Introduction to.NET Framework • Introduction to ASP.Net • Web Ecosystem and how ASP.NET fits into it, ASP.NET benefits. • Introduction to Visual Studio 2013 • Language Reference (C#) Module 2 • HTML / HTML5 overview • CSS 3 overview(CSS Rules, CSS Inheritance) • Elements, Layouts and Positioning • Working with HTML 5 and CSS 3 in Visual Studio 2013 • Implementing Twitter bootstrap with Visual Studio Module 3 • ASP.NET Server controls overview • User Controls • Themes • Master Pages • Client Scripts and JQuery • Validation and Exception Handling • Custom User Controls and Raising Events • Creating User Controls Dynamically. • Composite Controls • Advances User Controls • Template Controls Module 4 • Introduction to SQL Server Database • SQL Server Query • SQL Server Stored Procedures & Views • ADO.Net • ASP.NET Data access using ADO.NET Data Components • Data Sets, Data Adapter, and Commands, Parameters. • Data Binding and Data bound Controls • XML Data Module 5 • Introduction to Layered Architecture, Designing n-Tier Application in ASP.NET • Data Access Layer • Business Logic Layer • ASP.NET Web Services • Windows Communication Foundation • WCF Services Module 6 • ADO.NET entity Framework • LINQ (LINQ to Objects, LINQ to SQL) • Working with XML and LINQ to XML • Designing database application using Entity Framework. • Entity Framework in n-Tier Application Module 7 • Project Review • Exam Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | Wordpress | Graphics Designing Course | Graphics Designing training | Web Designing Course | Web Designing Training | Web Development Course | Web development training | SharePoint Course | Sharepoint training | SQL Server Course | SQL Server Training | Views: 65

SINA Institute of Networks and Aesthetics, The State of the Art Training Center, was established in Feb, 2010. 3G RF Planning & Optimization training: Training Modules Module 1: Introduction to UMTS Module 2: WCDMA/ UMTS Architecture Module 3: WCDMA/ UMTS Architecture Module 4: Spreading Process in WCDMA Module 5: 3G Coverage KPI’s Module 6: Handovers in 3G Module 7: Power Control in 3G Module 8: WCDMA Planning Module 9: Sample 3G drive Tests Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | Wordpress | Graphics Designing Course | Graphics Designing training | Web Designing Course | Web Designing Training | Web Development Course | Web development training | SharePoint Course | Sharepoint training | SQL Server Course | SQL Server Training | Views: 61

Microwave Training: Course Contents: 1. Digital Microwave Communication Overview i. What is Microwave? ii. Microwave Vs Fiber Optics iii. Microwave History iv. Digital Microwave Communication 2. Digital Microwave Communication Equipment i. Microwave Equipment Category ii. Trunk Microwave Equipment iii. All Outdoor Microwave Equipment 3. Digital Microwave Networking and Application i. Networking modes of Digital Microwave ii. Types of Digital Microwave Stations iii. Relay Stations 4. Microwave Propagation i. Key Parameters in Microwave Propagation ii. Factors Affecting Microwave Propagation iii. Types of Fading in Microwave Propagation 5. Digital Microwave Communication Overview i. Frequency domain equalization ii. Time domain equalization iii. Automatic transmit power control (ATPC) iv. Cross-polarization interference cancellation (XPIC 6. Microwave Propagation i. Microwave Transmission Line Design Basics ii. Microwave Transmission Line Requirements iii. Microwave Transmission Line Design Objectives 7. Installation Testing & Commissioning Exercises i. Site Survey ii. Path Profile & Link Budgeting iii. Antenna Installation iv. ODU Installation v. IDU Installation Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | Wordpress | Graphics Designing Course | Graphics Designing training | Web Designing Course | Web Designing Training | Web Development Course | Web development training | SharePoint Course | Sharepoint training | SQL Server Course | SQL Server Training | Views: 71

PMP Training: Training Modules: Starter: Assessment Exam Session 1: PMP Overview Session 2: Introduction Session 3: Project Life Cycle and Organization Session 4: Project Management Processes for a Project Session 5: Project Integration Management Session 6: Project Scope Management Session 7: Project Time Management Session 8: Project Cost Management Session 9: Project Quality management Session 10: Project Human Resource Management Session 11: Project Communications Management Session 12: Project Risk Management Session 13: Project Procurement Management Session 14: Project Stakeholder Management Session 15: Mock Exam, Case Study Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | Wordpress | Graphics Designing Course | Graphics Designing training | Web Designing Course | Web Designing Training | Web Development Course | Web development training | SharePoint Course | Sharepoint training | SQL Server Course | SQL Server Training | 3G training: Views: 67

SINA Institute of Networks and Aesthetics, The State of the Art Training Center, was established in Feb, 2010. AutoCAD Training: Course Contents: • Fundamentals of Drafting • Introduction to AutoCAD • Getting Started • Organizing Your Project • Using Coordinate System • Creating Objects • Drawing with Precision • Controlling the Drawing Display • Editing Methods • Using Layers, Colors, and Line-types • Adding Text to Drawings • Dimensioning and Tolerance • Layout and Plotting • 2D Projects • Working in Three-Dimensional Space (3D) • Creating Three Dimensional Images • Using Raster images • 3D Projects Related Trainings: Fiber Optics Course | Fiber Optics Training | Microwave Communication Course | Microwave Communication Training | 3G RF Planning Course | 3G RF Planning Training | SDH Course | SDH Training | CCNA Training | CCNA Course | CCNP Training | CCNP Course | IT Trainings | IT Courses | Telecom Courses | Telecom Trainings | Microsoft trainings | Microsoft courses | PLC & SCADA training | PLC & SCADA course | AutoCAD Training | AutoCAD course | Asp.NET training | Asp.NET course | Android Course | Android Training | RF Planning & Optimization Course | RF Planning & Optimization Training | Drive Testing Course | Drive testing training | PMP Course | PMP Training | Project Management Professional Course | Project Management Professional Training | ITIL Foundation Training | ITIL Foundation Course | English Language Training | English Language course | Spoken English Language Course | Spoken English Language Training | PMI trainings | PMI Courses | HMI | DCS | SEIMENS | Fatek | PLC Professional Course | PLC Professional Training | Industry | PLC Industry | Industrial Automation Course | Industrial Automation Training | Electronic System Design course | Electronics system design training | MS Project training | MS Project Course | MCSA Training | MCSE Training | MCITP training | MCSE Course | MCSA Course | MCITP Course | CISCO Courses | CISCO trainings | Microcontroller Course | Microcontroller training | FPGA | FlowCode | WinCC | TIA Software | MicroC | C++ Training | C++ Course | C# | PHP training | PHP course | HTML | XML | WordPress | Graphics Designing Course | Graphics Designing training | Web Designing Course | Web Designing Training | Web Development Course | Web development training | SharePoint Course | Sharepoint training | SQL Server Course | SQL Server Training |

EESINT is arranging a Professional Training session on SIEMENS PLC, HMI and SCADA in Islamabad and Lahore,Pakistan. We have complete SIMATIC hardware, first class demo kit and complete Range of Training Kits which no one else has such authorized set-up in Pakistan. We believe in quality therefore training will be delivered by our Industrial professionals having vast experience in the field of automation. This workshop provides complete knowledge of process and manufacturing industries and significance of automation controllers in those Industries. Fresh Graduates, Electrical, Electronics,DAE are encouraged to attend this workshop. This workshop will also help in Final year projects of students working in PLC, HMI, SCADA. For Further Details Call/SMS: 0302-8383212 0303-4851212 0307-7761212 Certificates will be awarded on completing the training. Registrations can also be done On-line: https://docs.google.com/forms/d/1YQiO2tUuy7d6C9ndLHvCrj_sLayTNnzYd83jSdOVrYg/viewform?fbzx=-4413006116788686558 Facebook Page: https://www.facebook.com/ElectricalEngineeringSolutionsInternational

Office Automation Training in Rawalpindi Islamabad TwinCity Institute Of Professional Studies (TIPS) >typing >ms word >ms excel >ms powerpoint >inpage Best Training Center in Rawalpindi 100% Practical Training Why TIPS? >Best Quality Training >Minimal Fee Structure >Certified Trainer >One TO One Class system (Individual Class System) Views: 3

Office Automation Training Course in Rawalpindi Islamabad TwinCity Institute Of Professional Studies (TIPS) Best Training Center in Rawalpindi 100% Practical Training Why TIPS? >Best Quality Training >Minimal Fee Structure >Certified Trainer >One TO One Class system (Individual Class System) For More Courses visit www.twincitycourses.com TIPS Institute Office # 230, 2nd Floor, Dubai Plaza, 6th Road Rawalpindi. Cell: 0312-5500552 & 0333-8801930 Landline: 051-4852401 from Feb 26th

"PLC SCADA and HMI Panels" Automation Training Course Duration: 6 Weeks, Saturday-Sunday (Total 60 Contact Hrs) Class: 10:00 AM to 2:00 PM Starting: Saturday, 14 Mar 2020 (1st Day FREE ????) SIEMENS PLCs 300/400/1200 in Totally Integrated Automation (TIA portal) Training material Full Course PDF format Practical Course Exercises Software Setup (TIA Portal 13, SCADA WinCC 7.5) Certification in PLC, SCADA and HMI Training Complete Hardware Training Kits Certified Professional Trainer with more than 15 years Industrial experience Fee installment options Course Content: Contact: +92 320 050 1217 Location: Islamabad Website: Views: 9

Office Automation Course in Rawalpindi Islamabad TwinCity Institute Of Professional Studies (TIPS) >typing >ms word >ms excel >ms powerpoint >inpage Best Training Center in Rawalpindi 100% Practical Training Why TIPS? >Best Quality Training >Minimal Fee Structure >Certified Trainer >One TO One Class system (Individual Class System) Views: 1

Office Automation Course in Rawalpindi Islamabad TwinCity Institute Of Professional Studies (TIPS) Best Training Center in Rawalpindi 100% Practical Training Why TIPS? >Best Quality Training >Minimal Fee Structure >Certified Trainer >One TO One Class system (Individual Class System) For More Courses visit www.twincitycourses.com TIPS Institute Office # 230, 2nd Floor, Dubai Plaza, 6th Road Rawalpindi. Cell: 0312-5500552 & 0333-8801930 Landline: 051-4852401 from Feb 26th

Office Automation In Professional Training Classes [2 Months]. With New Year Discount offer. Ms Windows. Ms Word. Ms Power Point. Ms Access. Ms Excel. Internet Classes. Computer Hardware. Computer Software. 03222083032 - 922134662474 3d.kamal@gmail.com Views: 1

Announces new batch of Selenium training course... You will learn Selenium software automation and Java from scratch Please email or call at: Info@qimpression.com 0 3 3 2- 3 3 9 9 3 0 9 Views: 1

learn Office Automation course in 02 Months Introductions to Computers English Typing Urdu Typing Microsoft Word 2010 Microsoft Excel 2010 Microsoft Power Point 2010 Internet & Online Education Urdu InPage 2009 Window Installation for admission or information call or sms us. you can also visit our facebook page Facebook.com/pakvocational Pakistan vocational training centre office no 61-B block new shah shams colony opp PTCL exchange vehari road Multan. Views: 93

learn Office Automation course in 02 Months Introductions to Computers English Typing Urdu Typing Microsoft Word 2010 Microsoft Excel 2010 Microsoft Power Point 2010 Internet & Online Education Urdu InPage 2009 Window Installation for admission or information call or sms us. you can also visit our facebook page facebook.com/pakvocational Pakistan vocational training centre office no 61-B block new shah shams colony opp PTCL exchange vehari road Multan.

Learn Advance Office Automation (Ms Office) with Govt. registered Institution’s Certificate. Professional & JOB oriented training with highly skilled trainers. Course Contents: • Basic of Office Procedure and Documentation • Microsoft Windows • Install & Remove Components and Equipments • File and Folder Management • Microsoft Word • Microsoft Excel • Microsoft Power Point • File Formats and Conversion • Microsoft Outlook Express • Internet Surfing • Sending and Receiving Corporate Emails • INPAGE Urdu Composing Hurry up & get registered now! 02136317494 03333291095 Views: 3

CCNP Enterprise v8 Curriculum Description In this curriculum, Cisco Networking Academy™ participants learn, apply, and practice CCNP Enterprise knowledge and skills through a series of in-depth hands-on experiences that reinforce their learning. The CCNP Enterprise v8 curriculum is presented in two courses that provide integrated and comprehensive coverage of professional-level networking technologies. Upon completion of each course, learners will be prepared to take the certification exam associated with that course. The two course are as follows: • CCNP Enterprise: Core Networking (CCNP ENCOR v8) – aligns to the Cisco Press CCNP and CCIE Enterprise Core ENCOR 350-401 Official Cert Guide and the Implementing Cisco Enterprise Network Core Technologies (ENCOR 350-401) certification exam. The ENCOR course includes implementation of core enterprise network technologies including dual stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. • CCNP Enterprise: Advanced Routing (CCNP ENARSI v8) – aligns to the Cisco Press CCNP Enterprise Advanced Routing ENARSI 300-410 Official Cert Guide and the Implementing Cisco Enterprise Advanced Routing and Services (ENARSI 300- 410) certification exam. ENARSI includes implementation and troubleshooting of advanced routing technologies and services including Layer 3, VPN services, infrastructure security, infrastructure services, and infrastructure automation. These two courses and the corresponding certification exams align to the overall CCNP Enterprise certification. Both of these courses provide learners extensive opportunities for hands-on practical experience and career skills development. The CCNP Enterprise v8 curriculum includes the following features: • Primary source of content for the learner is the Cisco Press Official Cert Guides. • Assessments and practice activities are focused on specific certification competencies to increase retention. • Embedded assessments provide immediate feedback to support the evaluation of knowledge and acquired skills. • Hands-on labs help students develop critical thinking and complex problem-solving skills. • Cisco Packet Tracer simulation-based learning activities are added as optional instructor resources to support review of CCNA skills. • Video demonstrations give insight into complex workflows and processes and provides exposure to advance networking tools and operations. Career Institute Faisalabad Cisco Networking Academy Views: 5

Pass Robotic Process Automation (RPA) Certification Exam in 1st attempt Free Workshop 23-OCT-2022 at 12:00 PM (Location: ONLINE) 2 hours  ☎️ Gulshan-E-Iqbal Branch: T: +92 2134986664 M:03313929217 #WhatsApp 03122169325 DHA Karachi Office: M: 03333808376 T: +92 2135344600 Shahra-e-faisal: T: +92 2134556664 M: 03343182845 #robotics_artifical #intelligence_course #robotic_certification # training_program from Oct 23rd

EESINT is arranging a Professional Training session on SIEMENS SCADA in Islamabad and Lahore. It is a Level 2 Training Session on SIMATIC WinCC Explorer Software used for SCADA. Pre-Requisites: Basic Training/Course on PLC,HMI. We have complete SIMATIC hardware, first class demo kit and complete Range of Training Kits which no one else has such authorized set-up in Pakistan. We believe in quality therefore training will be delivered by our Industrial professionals having vast experience in the field of automation. Certificates will be awarded on completing the training. Registrations can also be done On-line: https://docs.google.com/forms/d/1YQiO2tUuy7d6C9ndLHvCrj_sLayTNnzYd83jSdOVrYg/viewform?fbzx=- Facebook Page: https://www.facebook.com/ElectricalEngineeringSolutionsInternational

*****PLC, HMI and SCADA Trainings in Faisalabad **** SIEMENS PLC - HMI - SCADA & Field Instruments Professional Training in Industrial Environment. For the first time in faisalabad , we are offering you a totally hands-on practical training which consists of: Quality training will be delivered by our Industrial professionals having vast experience in the field of automation. Certificates will be awarded on completing the training, Limited seats are available. • PLC • HMI • SCADA • Field Instrument Global Industrial Solutions www.mygisolution.com For further details, please feel free to contact us at: 0335-6021212 041-2429151 | info@mygisolution.com | trainings@mygisolution.com facebook page:- https://www.facebook.com/pages/Global-industrial-solutions/460817260786804 For Online Registration: https://docs.google.com/forms/d/1UkGvXjNDDajM-H4NtDox6G-dQXL175Y_II7Jn59kDoE/viewform?c=0&w=1

SINA Institute of Networks and Aesthetics, The State of the Art Training Center, was established in Feb, 2010. SINA offers training programs in areas of Information Technology, Telecom, Industrial Automation, Management, Soft Skills, Mind Sciences, Personal Development, English Language, English Exams and Vocational Technical Training leading to entrepreneurship. Our courses have been developed and refined to ensure that material presented is current and relevant that maximizes your return on investment in training’s. Our courses consist of lectures and videos with ample time for hands on practice in labs and one on one time with the instructor. We ensure participants learn what they need to know to make their job easier and more productive.

We Provide Industrial Automation Training (PLC/HMI/SCADA/DCS) using Latest ALLEN BRADELY- Training Equipment.Online Training Facility is also available to students/Professionals. Views: 5

TwinCity Institute Of Professional Studies (TIPS) MS-OFFICE Course Best Training Center in Rawalpindi 100% Practical Training Course Duration 2 month Why TIPS? >Best Quality Training >Minimal Fee Structure >Certified Trainer >One TO One Class system (Individual Class System) For More Courses visit Office s137,2nd Floor, Malikabad Plaza, Main Murree Road, Near Rehmanabad Metro Station, Rawalpindi. Views: 4

ArcGis Advance Training Course in Rawalpindi Gulraiz,ArcGis Advance Training Course in Rawalpindi Gulraiz,This is an introductory course covering the theory and application of geographic information systems (GIS). The course includes an overview of the general principles of GIS and practical experience in its use. The lectures follow the organization of the textbook. The practical component involves the hands-on use of desktop GIS software packages. The course includes a final project component, through which students will investigate the application of GIS technologies in depth. Introduction to concepts; areas of application; system planning & acquisition; data automation; implementation and evaluation strategies; costs and benefits analysis; spatial query and analysis; towards a national GIS/LIS strategy. Satellite systems: components, modes of operation, infrastructural need, and sources of data. Terrestrial systems: establishment of controls detailed surveying, combination with satellite methods. Datums: traditional and satellite systems, conversion, and accuracy. Applications and quality assessment.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan.Experienced Based Diploma in Ac Technician,Electronic, Mechanical, Plumbing, Auto Electrician, Efi Auto Electrician, Civil Surveyor, Quantity surveyor civil lab material testing, Best Institute in Rawalpindi islamabad Pakistan Lahore, Lowest fee course in pakistan, lowest fee professional practical training course in pakistan rawalpindi peshawar kashmir bagh lahore islamabad kahuta chakwal rahimyar khan gujarat gujarawala multan, attock Best institute in rawalpindi professional teacher and qualified staff.Dubai, Abu Dabi, Muscat, Oman, Doha, Qatar,South Africa, Saudia Arabia, kawat, Behrain, Kotli Sattian, Murree, UK, UAE, Sharja,Civil Technology Courses Diploma in Civil Surveyor Diploma in Quantity Surveyor Diploma in Civil Draftman Diploma in Civil Lab Technician Diploma in Civil Architecture Diploma in Civil Engineering One Year Diploma in Civil Engineering Two Years OSHA Construction Civil Safety Electrical Technology Courses Diploma in Electrical Engineering one year Diploma in Electrical Engineering Two years Electrician Course in Rawalpindi Electrician Course in Lahore Electrician Course in Peshawar Telecommunication Technology Courses Diploma in Telecommunication One year Diploma in Telecommunication Two years Diploma in Optical Fiber Diploma in CCTV technician Mechanical Technology Courses Diploma in Mechanical Technology One Year Diploma in Mechanical Technology Two Years Diploma in Project Management (DPM) Diploma in Hotel Management Diploma in Hospitality Management Diploma in Quality Assurance (QA) Diploma in Quality Control (QC) Diploma in Total Quality Management (TQM) Diploma in Import & Export Management Diploma in College and University Management Diploma in Auditing Diploma in Accounts Management Diploma in Fast Food Management Diploma in Flood Risk Management Diploma in Guest House Management Diploma in International Tourism Management Diploma in Energy Management Diploma in Library Views: 3