Shield standard multicolor

WRL-12847 SparkFun XBee Shield Description: Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. WRL 12847 XBee Shield SPARKFUN Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

WRL- SparkFun XBee Shield Description: Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. WRL XBee Shield SPARKFUN Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile: www.matrixelectronic.com Email: Email: Box Pack - No Warranty

Description This is a Ethernet shield based on the Wiznet W ethernet chip, This latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. compatible with Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just Layout of Ethernet port location. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution, but the sdfatlib by Bill Greiman works well. See this tutorial from Adafruit Industries for instructions Read more: http://www.elecfreaks.com/store/ethernet-shield-w-p-372.html#ixzz2zyywdiCs" Box Pack - No Warranty

Description This is a Ethernet shield based on the Wiznet W ethernet chip, This latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. compatible with Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just Layout of Ethernet port location. It is based on the Wiznet W ethernet chip providing a network IP stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega using the Ethernet library coming in Arduino . An SD card library is not yet included in the standard Arduino distribution, but the sdfatlib by Bill Greiman works well. See this tutorial from Adafruit Industries for instructions" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Description This is a Ethernet shield based on the Wiznet W ethernet chip, This latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. compatible with Arduino Ethernet Shield,added support to Arduino Mega. The different between with Arduino Ethernet Shield just Layout of Ethernet port location. It is based on the Wiznet W ethernet chip providing a network IP stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega using the Ethernet library coming in Arduino . An SD card library is not yet included in the standard Arduino distribution, but the sdfatlib by Bill Greiman works well. See this tutorial from Adafruit Industries for instructions" Facebook page;ElectronicsArena.com

Description This is a Ethernet shield based on the Wiznet W ethernet chip, This latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network compatible with Arduino Ethernet Shield,added support to Arduino Mega The different between with Arduino Ethernet Shield just Layout of Ethernet port location It is based on the Wiznet W ethernet chip providing a network IP stack capable of both TCP and UDP The Arduino Ethernet Shield supports up to four simultaneous socket connections Use the Ethernet library to write sketches which connect to the internet using the shield The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network It is compatible with the Arduino Duemilanove and Mega using the Ethernet library coming in Arduino An SD card library is not yet included in the standard Arduino distribution, but the sdfatlib by Bill Greiman works well See this tutorial from Adafruit Industries for instructions" Box Pack - No Warranty

description this is a ethernet shield based on the wiznet w ethernet chip, this latest revision of the shield adds a micro sd card slot, which can be used to store files for serving over the network. compatible with arduino ethernet shield,added support to arduino mega. the different between with arduino ethernet shield just layout of ethernet port location. it is based on the wiznet w ethernet chip providing a network ip stack capable of both tcp and udp. the arduino ethernet shield supports up to four simultaneous socket connections. use the ethernet library to write sketches which connect to the internet using the shield. the latest revision of the shield adds a micro sd card slot, which can be used to store files for serving over the network. it is compatible with the arduino duemilanove and mega using the ethernet library coming in arduino . an sd card library is not yet included in the standard arduino distribution, but the sdfatlib by bill greiman works well. see this tutorial from adafruit industries for instructions" Box Pack - No Warranty

Introduction: GPRS Shield - EFCom is an ultra compact and reliable wireless module. This GPRS Shield is compatible with all boards which have the same form factor (and pinout) as a standard Ardu Board. EFCom is base on SIM Frequency GPRS module. The GPRS Shield is configured and controlled via its UART using simple AT commands. Just plug this shield on the Freadu board, you could easy to use AT command control EFCom Shild. You can use the 2 jumper block to connect the SIM900 URAT post to any pins within D0-D3(for Hardware/Software serial port). There is a switch on board, you can use it to select the connection of the UART port or Debug port,but by the switch and jumper block, the SIM900 can be connect to PC via FT233RL. Packing list: 1 x GPRS Shield -EFCom 1 x 4 Frequency Antenna 1 x9V AC/DC Power Adapter " Box Pack - No Warranty

introduction: gprs shield efcom is an ultra compact and reliable wireless module. this gprs shield is compatible with all boards which have the same form factor and pinout as a standard ardu board. efcom is base on sim frequency gprs module. the gprs shield is configured and controlled via its uart using simple at commands. just plug this shield on the freadu board, you could easy to use at command control efcom shild. you can use the 2 jumper block to connect the sim900 urat post to any pins within d0 d3 for hardware software serial port. there is a switch on board, you can use it to select the connection of the uart port or debug port,but by the switch and jumper block, the sim900 can be connect to pc via ft233rl. packing list: 1 x gprs shield efcom 1 x 4 frequency antenna 1 x9v ac dc power adapter " Box Pack - No Warranty

Introduction GPRS Shield - EFCom is an ultra compact and reliable wireless module. This GPRS Shield is compatible with all boards which have the same form factor and pinout as a standard Ardu Board. EFCom is base on SIM900 4 Frequency GPRS module. The GPRS Shield is configured and controlled via its UART using simple AT commands. Just plug this shield on the Freadu board, you could easy to use AT command control EFCom Shild. You can use the 2 jumper block to connect the SIM900 URAT post to any pins within D0-D3for HardwareSoftware serial port. There is a switch on board, you can use it to select the connection of the UART port or Debug port,but by the switch and jumper block, the SIM900 can be connect to PC via FT233RL. Packing list 1 x GPRS Shield -EFCom 1 x 4 Frequency Antenna 1 x9V ACDC Power Adapter

The TFT01 the LCD is operating at 3.3V, this can not be directly used in the standard Arduino motherboard on top, so in order to make the TFT01 the LCD is compatible with the Arduino on the motherboard used in the standard, designed this section of TFT Shield, can be directly inserted in the Arduino on the motherboarduse the TFT01 the LCD module. The TFR01 MEGA shield V1.0 supports both 16 bit mode.Because of Mega board have enough pins for using SD card and Touch function at the same time." Facebook page;ElectronicsArena.com Box Pack - No Warranty

the tft01 the lcd is operating at 3.3v, this can not be directly used in the standard arduino motherboard on top, so in order to make the tft01 the lcd is compatible with the arduino on the motherboard used in the standard, designed this section of tft shield, can be directly inserted in the arduino on the motherboard use the tft01 the LCD module. the tfr01 mega shield v1.0 supports both 16 bit mode.because of mega board have enough pins for using sd card and touch function at the same time." Box Pack - No Warranty

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com USB Host Shield 2.0 Description: The board’s improved layout makes this shield compatible with more Arduinos, makes it easier to use and opens new possibilities. The main differences from rev.1xx are outlined below: The SPI interface has been moved to ICSP header making shield compatible out of the box with “big” Arduinos – Mega and 2560. Standard size boards, such as Duemilanove, UNO, as well as clones with classic connector layout, are also compatible with this revision of the shield. This compatibility is maintained on a software level as well – all necessary code changes are performed using conditional compilation preprocessor directives.

DESCRIPTION Operating Voltage: 5 V USB Controller: MAX3421E Max Current: 500mA when Arduino is powered by a suitable power supply connected to the Arduino power jack Max Current USB: 400mA when Arduino is powered by its USB port Features: The following device classes are currently supported by the shield: 1) HID devices, such as keyboards, mice, joysticks, etc.2) Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Arduino Mega only) USB 2.0 Full Speed compatible 3.3/5V operation level compatible All GPIOx pins break-out USB Host 5V/500mA supply for USB protocol Works with standard (dual 5/3.3V) and 3.3V-only (for example, Arduino Pro) boards. Mention that you found this ad on DealMarkaz.pk when you call.

The TFT01 the LCD is operating at 3.3V, this can not be directly used in the standard Arduino motherboard on top, so in order to make the TFT01 the LCD is compatible with the Arduino on the motherboard used in the standard, designed this section of TFT Shield, can be directly inserted in the Arduino on the motherboarduse the TFT01 the LCD module. The TFR01 MEGA shield V1.0 supports both 16 bit mode.Because of Mega board have enough pins for using SD card and Touch function at the same time." Box Pack - No Warranty