Sec sensors transmissive

Zebra GK888T 108mm label &barcode printer Printer Specifications Resolution: 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: mm Print Length: mm Print Speed: 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Media Characteristics Maximum label and liner length: mm Maximum label and liner width:mm Maximum roll diameter: mm O.D. on a mm I.D. core Core diameter: mm to mm Using media adaptor plates(included): mm,mm and mm Media thickness: mm) to mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter: mm Standard length: m using " ribbon thickness Width: mm to mm Ribbon setup: Ribbon wound ink side out Core I.D.: mm Operating Characteristics Environmental Operating temperature: 40° F /5° C to 105° F /41° C Storage temperatures: -40° F/-40° C to 140° F /60° C Operating humidity: % non-condensing R.H. Storage humidity: 5-95% non-condensing R.H. Electrical Auto-detecable (PFC Compliant) VAC, Hz Agency approvals CCC, BSMI Physical Characteristics Width: mm Depth: mm Height: mm Weight: 3.0Ibs/1.4kg Communication and Interface Capabilities Centronics parallel (36 pin) connector ports RS-232 serial inferface USB 1.1v Box Pack- Warranty: 3 Months

Wholesale - Zebra GK888t Label Barcode Printer Support 1D and 2D barcode (Thermal Transfer / Direct Thermal) Printer Specifications Resolution: 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: mm Print Length: mm Print Speed: 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Media Characteristics Maximum label and liner length: mm Maximum label and liner width:mm Maximum roll diameter: mm O.D. on a mm I.D. core Core diameter: mm to mm Using media adaptor plates(included): mm,mm and mm Media thickness: mm) to mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter: mm Standard length: m using " ribbon thickness Width: mm to mm Ribbon setup: Ribbon wound ink side out Core I.D.: mm Operating Characteristics Environmental Operating temperature: 40° F /5° C to 105° F /41° C Storage temperatures: -40° F/-40° C to 140° F /60° C Operating humidity: % non-condensing R.H. Storage humidity: 5-95% non-condensing R.H. Electrical Auto-detecable (PFC Compliant) VAC, Hz Agency approvals CCC, BSMI Physical Characteristics Width: mm Depth: mm Height: mm Weight: 3.0Ibs/1.4kg Communication and Interface Capabilities Centronics parallel (36 pin) connector ports RS-232 serial inferface USB 1.1v

Zebra GK888T Desktop Label Printer / Barcode Printer Specifications Printer Specifications Resolution : 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed : 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Media Characteristics Maximum label and liner length: 39"/900mm Maximum label and liner width:4.25"/108mm Maximum roll diameter: 5"/127mm O.D. on a 1"/25.4mm I.D. core Core diameter: 1"/25.4mm to 1.5"/38mm Using media adaptor plates(included): 2.0"/50.8mm,2. 5"/63.5mm and 3"/76.2mm Media thickness: 0.003" /(0.08 mm) to 0.0075" /(0.19 mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter: 1.36"/35mm Standard length: 244"/74m using 0.000328" ribbon thickness Width: 1.30"/33mm to 4.30"/110mm Ribbon setup: Ribbon wound ink side out Core I.D.: 0.5"/13mm Operating Characteristics Environmental Operating temperature: 40° F /5° C to 105° F /41° C Storage temperatures: -40° F/-40° C to 140° F /60° C Operating humidity: 10-90% non-condensing R.H. Storage humidity: 5-95% non-condensing R.H. Electrical Auto-detecable (PFC Compliant) 100-240 VAC, 50-60 Hz Agency approvals CCC, BSMI Physical Characteristics Width: 7.9"/201mm Depth: 8.2"/208mm Height: 6.7"/170mm Weight: 3.0Ibs/1.4kg Communication and Interface Capabilities Centronics parallel (36 pin) connector ports RS-232 serial inferface USB 1.1v

Media Characteristics Maximum label and liner length: 39"/900mm Maximum label and liner width:4.25"/108mm Maximum roll diameter: 5"/127mm O.D. on a 1"/25.4mm I.D. core Core diameter: 1"/25.4mm to 1.5"/38mm Using 999media adaptor plates(included): 2.0"/50.8mm,2. 5"/63.5mm and 3"/76.2mm Media thickness: 0.003" /(0.08 mm) to 0.0075" /(0.19 mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Printer Specifications Resolution: 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed: 4" per sec/102mm per sec Media Sensors: Transmissive and reflective

DESCRIPTION Resolution: 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed: 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Resolution: 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed: 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Mention that you found this ad on DealMarkaz.pk when you call. Mention that you found this ad on DealMarkaz.pk when you call.

Zebra GK888T Desktop Label Printer Barcode Printer Specifications Printer Specifications Resolution 203dpi 8 dots per mm Memory Standard 8MB SDRAM 8MB Flash Print Width mm Print Length mm Print Speed 4 per sec102mm per sec Media Sensors Transmissive and reflective Media Characteristics Maximum label and liner length mm Maximum label and liner widthmm Maximum roll diameter mm O.D. on a mm I.D. core Core diameter mm to mm Using media adaptor platesincluded mm,mm and mm Media thickness mm to mm Media types Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter mm Standard length m using ribbon thickness Width mm to mm Ribbon setup Ribbon wound ink side out Core I.D. mm Condition: - Warranty: 1 Months

Zebra GK888T Desktop Label Printer Barcode Printer Specifications Printer Specifications Resolution 203dpi 8 dots per mm Memory Standard 8MB SDRAM 8MB Flash Print Width mm Print Length mm Print Speed 4 per sec102mm per sec Media Sensors Transmissive and reflective Media Characteristics Maximum label and liner length mm Maximum label and liner widthmm Maximum roll diameter mm O.D. on a mm I.D. core Core diameter mm to mm Using media adaptor platesincluded mm,mm and mm Media thickness mm to mm Media types Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter mm Standard length m using ribbon thickness Width mm to mm Ribbon setup Ribbon wound ink side out Core I.D. mm

Zebra GK888T Desktop Label Printer Barcode Printer Specifications Printer Specifications Resolution 203dpi 8 dots per mm Memory Standard 8MB SDRAM 8MB Flash Print Width 4.09104mm Print Length 39990mm Print Speed 4 per sec102mm per sec Media Sensors Transmissive and reflective Media Characteristics Maximum label and liner length 39900mm Maximum label and liner width4.25108mm Maximum roll diameter 5127mm O.D. on a 125.4mm I.D. core Core diameter 125.4mm to 1.538mm Using media adaptor platesincluded 2.050.8mm,2. 563.5mm and 376.2mm Media thickness 0.003 0.08 mm to 0.0075 0.19 mm Media types Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag s...

Specifications: resolution: 203dpi(8dots/mm) width: 4.09" (104mm) speed: 4" (102mm) per second construction: high-impact, double-walled plastic enclosure ZebraLink-enabled: no Maximum label and liner width: 4.25" (108 mm) Maximum label length (with standard memory): 11" (279 mm) Maximum label length (with optional memory): 22" (558 mm) Media Dimensions: Total thickness: 0.003" (.07 mm) to.0075" (0.18 mm) Label roll diameter: 5" (127 mm) Core diameter: 1.0" (25.4 mm) & 1.5" (38 mm) Dual Media Sensors: Transmissive Reflective Ribbons: Width (outside diameter): 1.3" (33 mm) to 4.3" (110 mm) maximum Length: 2,928"/244' (74 m) Recommended to be at least as wide as media Print Speeds: Maximum Print Speed: 4" (102 mm) per second

The A-3140 desktop thermal transfer printer offers 300dpi resolution and is ideal for printing high quality text and graphic labels such as for logos, small items such as jewelry, or for information labels. Printing up to a rapid four inches per second, the A-3140 has a 32-bit microprocessor, as well as 8M Flash and 8M DRAM internal memory for high print quality. Easily integrating with your current system, the A-3140 connects through standard serial ports and a USB interface. You can load a maximum 5" OD media roll and a see-through window lets you see when it’s time to reload. Four auto-calibration modes and reflective and transmissive sensors handle a broad range of media for printing up to 50-inches in length. Barcode support includes 1D/GS1 Data bar, 2D/Composite codes and QR barcodes. For high quality printing, the user-friendly A-3140 provides outstanding and cost-effective performance. 300dpi print resolution for high quality printing of text and graphics 8M Flash and 8M DRAM memory for high print quality 32-bit CPU for up to 4ips printing speed No ribbon wrinkle with centralized thermal print head RS-232 and USB interfaces Reflective and transmissive movable sensors, and fixed center transmissive sensor Large 5-inch OD media capacity Easy installation of media and ribbon Leverages Argox existing controller technology Supports 1D/GS1 Data bar, 2D/Composite codes and QR barcodes, and more Options include: Cutter, Peeler, Media Stacker, RTC card and Argokee standalone keyboard

Product Information The direct-thermal Zebra LP 2824 Plus printer delivers amazing performance to accomplish your label printing tasks. With included 32-bit RISC processor, this Zebra thermal printer not only offers faster formatting, but also rapidly prints the first label. The 8 dots/mm (203dpi) resolution of this Zebra label printer produces excellent quality prints. This Unicode compatible Zebra thermal printer enables multi-language printing. Equipped with fixed reflective and transmissive sensors, this Zebra label printer conveniently handles broad range of media types including Roll-fed or fanfold, die-cut or continuous direct thermal labels (with or without black mark), tag stock, continuous receipt paper, etc. Integrated with interface like RS-232 serial, USB 1.1, etc, the Zebra LP 2824 plus printer endows flexible connectivity options. Product Features A powerful, ultra-compact printer One of the smallest in its class, the easy-to-use 2824 Plus desktop printer tucks into your tightest work spaces and prints 2-inch-wide labels or receipts with best-in-class print speeds. The 2824 Plus includes Zebra setup utilities, which guides you through simple setup steps so you can get up and running quickly. It also includes an OpenACCESS design and clear media window for simple media loading and monitoring. Better performance, more flexibility A robust 32-bit RISC processor increases throughput and productivity with faster formatting and first label out. For greater flexibility and enhanced performance, choose from a variety of options like convenient peeler and cutter, and 64 MB Flash memory that lets you store and use more graphics and fonts. With co-resident EPL and ZPL programming languages, the 2824 Plus works seamlessly with other Zebra printers, while serial/parallel/USB connectivity and optional 10/100 Ethernet allow easy system integration. Product Identifiers Brand Zebra Model LP 2824 Plus Key Features Printer Type Label Printer Technology Thermal Output Type Black & White Black print speed up to 4 inch/sec Max Resolution (BW) 203 x 203 dpi Technical Features Extend Printer Technology Direct Thermal Interface Ethernet (RJ-45), USB 1.0/1.1 Form Factor Desktop Duplex Printout Standard Media Media Type Die-Cut, Labels, Reflective Max Media Size Roll (6 cm) Networking Networking Type Network Adapter Data Link Protocol Ethernet, Fast Ethernet, Parallel Miscellaneous Color Black

The Zebra GK420d monochrome desktop direct thermal label printer comes equipped with Ethernet and USB ports, prints 5" per second in black at 203 dpi, and can be used to print labels, tags, receipts, or other media up to 4.09" wide. Direct thermal printers use heat instead of ink and are typically smaller, quieter, faster, and more energy-efficient than dot-matrix printers. The GK420d has a maximum print speed of 5" per second at 203 dpi (dots per inch) and prints labels up to 39” long. The 32-bit processor combined with the 8 MB of SDRAM memory and 4 MB of flash memory offers fast first label printing with extensive media graphics. The Ethernet port enables the printer to be connected to a wired computer network (Ethernet cord sold separately). A USB port and an included USB cable provide connectivity to a computer or another device. EPL and ZPL programming languages are standard. The GK420d printer's double-walled casing is made of ABS (acrylonitrile butadiene styrene), which helps resist impact. An open-access design facilitates media loading. A reflective sensor allows the printer to identify the gaps, holes, notches, or black marks between labels to print the labels accurately. A transmissive sensor enables it to detect when a roll of media has run out. The auto-detectable power adapter can accept AC power between 100 and 240 volts. This printer is suitable for use with black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, or tag stock media (all sold separately). The maximum outside diameter for rolls is 5". Specifications Resolution 203 dpi (8 dots/mm) Memory 8 MB SDRAM; 4 MB flash Print Width 4.09" maximum Print Length 39" Print Speed 5"/second Media Sensors Reflective, transmissive Label and Liner Width Range 0.75" to 4.25" Label and Liner Length Range 0.38" to 39" Maximum Roll Diameter 5" Core Diameter 0.5", 1.0", and 1.5" Media Thickness Range 0.003" to 0.0075" Media Types Black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, tag stock Operating Temperature 40 to 105 degrees F Operating Humidity 10 to 90 percent non-condensing Storage Temperatures -40 to 140 degrees F Storage Humidity 5 to 95 percent non-condensing Voltage and Frequency Auto-detecting 100-240 VAC, 50-60 Hz Dimensions 6 x 6.75 x 8.25 inches (H x W x D)* Weight 3.1 lb. * H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Label printers, also known as label makers, can be used to print labels, tags, receipts, and other similarly sized media. Direct thermal and thermal transfer label printers use heat instead of ink to print on coated thermal media. A parallel, serial, or USB port allows a label printer to be connected to a computer. An Ethernet port or wireless capabilities may enable it to be connected to a computer network. Label printers can be used in a variety of commercial environments, including warehouses, laboratories, retail stores, health care facilities, and shipping and receiving facilities.

Printer Name LP/TLP Standard Features • direct thermal (LP) • Programming language: EPL™ and ZPL® are standard • Construction: Dual-wall frame, reinforced plastic • OpenACCESS™ for easy media loading • Quick and easy ribbon loading • Auto calibration • 32-bit RISC processor • Reset button defaults to factory and/or network settings • Unicode™ compliant • Head up sensor • Certified Microsoft® Windows® drivers • Standard tear-off mode • Serial port auto detection Printer Specifications • Print speed: Maximum mm per second • Print width: mm • Print length: Maximum mm Resolution • 203 dpi/8dots per mm Memory • 4 MB Flash, 8 MB SDRAM (standard) • 64 MB Flash with real-time clock for a total of 68 MB (option) Media Sensors • Standard: Fixed reflective and transmissive sensors Media Characteristics • Media length: mm to mm • Media width: mm to mm • Media width w/ 2” Media Guide: mm to mm • Maximum media roll size: mm O.D. on a mm, mm I.D. core • Media thickness: mm to mm • Media types: Roll-fed or fan-fed, die cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, wristbands, and optional liner-free direct thermal media • Outside diameter: mm • Standard length: m • Ratio: 1:1 media to roll to ribbon • Width: mm to mm • Core (I.D.): mm, mm

More Standard Features Construction Metal frame and Bi-fold metal media cover with enlarged clear viewing window Side-loading supplies path for simplified media and ribbon loading Element Energy Equalizer E3 for superior print quality Communication - USB 2.0, High-Speed, RS-232 Serial, Ethernet, Bluetooth 2.1, USB Host Back-lit, multiline graphic LCD display with intuitive menu and easy-to-use keypad for quick operation Link-OS Bi-colored status LEDs for quick printer status ENERGY STAR qualified Printer Specifications Resolution 203 dpi8 dots per mm 300 dpi12 dots per mm optional 600 dpi24 dots per mm optional Memory 256 MB RAM memory 4 MB User Available 512 MB Flash memory 64 MB User Available Maximum Print Width mm Maximum Print Speed 14 ips356 mm per second Media Sensors Dual media sensors - transmissive and reflective Condition: - Warranty: 1 Months

Construction Metal frame and Bi-fold metal media cover with enlarged clear viewing window Side-loading supplies path for simplified media and ribbon loading Element Energy Equalizer E3 for superior print quality Communication - USB 2.0, High-Speed, RS-232 Serial, 10100 Ethernet, Bluetooth 2.1, USB Host Back-lit, multiline graphic LCD display with intuitive menu and easy-to-use keypad for quick operation Link-OS Bi-colored status LEDs for quick printer status ENERGY STAR qualified Printer Specifications Resolution 203 dpi8 dots per mm 300 dpi12 dots per mm optional 600 dpi24 dots per mm optional Memory 256 MB RAM memory 4 MB User Available 512 MB Flash memory 64 MB User Available Maximum Print Width 4.09104 mm Maximum Print Speed 14 ips356 mm per second Media Sensors Dual media sensors - transmissive and reflective

Construction Metal frame and Bi-fold metal media cover with enlarged clear viewing window Side-loading supplies path for simplified media and ribbon loading Element Energy Equalizer E3 for superior print quality Communication - USB 2.0, High-Speed, RS-232 Serial, Ethernet, Bluetooth 2.1, USB Host Back-lit, multiline graphic LCD display with intuitive menu and easy-to-use keypad for quick operation Link-OS Bi-colored status LEDs for quick printer status ENERGY STAR qualified Printer Specifications Resolution 203 dpi8 dots per mm 300 dpi12 dots per mm optional 600 dpi24 dots per mm optional Memory 256 MB RAM memory 4 MB User Available 512 MB Flash memory 64 MB User Available Maximum Print Width mm Maximum Print Speed 14 ips356 mm per second Media Sensors Dual media sensors - transmissive and reflective Condition: - Warranty: 1 Year

Construction Metal frame and Bi-fold metal media cover with enlarged clear viewing window Side-loading supplies path for simplified media and ribbon loading Element Energy Equalizer E3 for superior print quality Communication - USB 2.0, High-Speed, RS-232 Serial, 10100 Ethernet, Bluetooth 2.1, USB Host Back-lit, multiline graphic LCD display with intuitive menu and easy-to-use keypad for quick operation Link-OS Bi-colored status LEDs for quick printer status ENERGY STAR qualified Printer Specifications Resolution 203 dpi8 dots per mm 300 dpi12 dots per mm optional 600 dpi24 dots per mm optional Memory 256 MB RAM memory 4 MB User Available 512 MB Flash memory 64 MB User Available Maximum Print Width 4.09104 mm Maximum Print Speed 14 ips356 mm per second Media Sensors Dual media sensors - transmissive and reflective

The Zebra ZM400 Direct ThermalThermal Transfer Desktop Label Printer prints 4.09 wide labels at 10 per second and 203 dpi 8 dotsmm. An element energy equalizer E3, auto-calibration, and real-time clock help to increase work efficiency. The die-cast aluminum base, frame, and printhead mechanism offer durability. It has a standard 16 MB DRAM and 8 MB flash with 2 MB for user storage. Media sensors are transmissive and reflective to accommodate different label types including continuous, tag, die-cut, and black mark. Multiple connection options include serial, bi-directional parallel ports, and USB 2.0. Specifications Dimensions 13.3 x 10.9 x 18.7 inches338 x 278 x 475 mm H x W x D Print width x length continuous mm x mm W x L Max label length mm Max. label width mm Maximum roll diameter mm Core diameter 376 mm Media thickness mm min. to mm max. Condition: - Warranty: 1 Months

The Zebra ZM400 Direct ThermalThermal Transfer Desktop Label Printer prints 4.09 wide labels at 10 per second and 203 dpi 8 dotsmm. An element energy equalizer E3, auto-calibration, and real-time clock help to increase work efficiency. The die-cast aluminum base, frame, and printhead mechanism offer durability. It has a standard 16 MB DRAM and 8 MB flash with 2 MB for user storage. Media sensors are transmissive and reflective to accommodate different label types including continuous, tag, die-cut, and black mark. Multiple connection options include serial, bi-directional parallel ports, and USB 2.0.

The A- desktop thermal transfer printer offers 300dpi resolution and is ideal for printing high quality text and graphic labels such as for logos, small items such as jewelry, or for information labels. Printing up to a rapid four inches per second, the A- has a 32-bit microprocessor, as well as 8M Flash and 8M DRAM internal memory for high print quality. Easily integrating with your current system, the A- connects through standard serial ports and a USB interface. You can load a maximum 5 OD media roll and a see-through window lets you see when its time to reload. Four auto-calibration modes and reflective and transmissive sensors handle a broad range of media for printing up to 50-inches in length. Barcode support includes 1DGS1 Data bar, 2DComposite codes and QR barcodes. For high quality printing, the user-friendly A- provides outstanding and cost-effective performance. 300dpi print resolution for high quality printing of text and graphics Condition: - Warranty: 1 Year

Product Information The direct-thermal Zebra LP Plus printer delivers amazing performance to accomplish your label printing tasks. With included 32-bit RISC processor, this Zebra thermal printer not only offers faster formatting, but also rapidly prints the first label. The 8 dotsmm 203dpi resolution of this Zebra label printer produces excellent quality prints. This Unicode compatible Zebra thermal printer enables multi-language printing. Equipped with fixed reflective and transmissive sensors, this Zebra label printer conveniently handles broad range of media types including Roll-fed or fanfold, die-cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, etc. Integrated with interface like RS-232 serial, USB 1.1, etc, the Zebra LP plus printer endows flexible connectivity options. Product Features A powerful, ultra-compact printer One of the smallest in its class, the easy-to-use Condition: - Warranty: 1 Year

The Zebra ZM400 Direct ThermalThermal Transfer Desktop Label Printer prints 4.09 wide labels at 10 per second and 203 dpi 8 dotsmm. An element energy equalizer E3, auto-calibration, and real-time clock help to increase work efficiency. The die-cast aluminum base, frame, and printhead mechanism offer durability. It has a standard 16 MB DRAM and 8 MB flash with 2 MB for user storage. Media sensors are transmissive and reflective to accommodate different label types including continuous, tag, die-cut, and black mark. Multiple connection options include serial, bi-directional parallel ports, and USB 2.0. Condition: - Warranty: 1 Year

The A- desktop thermal transfer printer offers 300dpi resolution and is ideal for printing high quality text and graphic labels such as for logos, small items such as jewelry, or for information labels. Printing up to a rapid four inches per second, the A- has a 32-bit microprocessor, as well as 8M Flash and 8M DRAM internal memory for high print quality. Easily integrating with your current system, the A- connects through standard serial ports and a USB interface. You can load a maximum 5 OD media roll and a see-through window lets you see when its time to reload. Four auto-calibration modes and reflective and transmissive sensors handle a broad range of media for printing up to 50-inches in length. Barcode support includes 1DGS1 Data bar, 2DComposite codes and QR barcodes. For high quality printing, the user-friendly A- provides outstanding and cost-effective performance. 300dpi print resolution for high quality printing of text and graphics