Pam8610 digital power amplifier

PAM8610 digital power amplifier board 2 x15w dual channel stereo mini class D power amplifier board.very powerful. You can fix this chip in a box and attach speakers adopter and aux female then put it in your car very easily.very good and no hot chip.enjoy. brand new 10/10 condition. 500/- each.

its an audio amplifier usb powered 2channel 4ohms maximum power 20wx2 remote and songs input through (sd/usb/aux/fm)

Heavy sound system, digital japanies amplifier with power supply and speakers.

"material:glass fiber specification:this board uses pam8610 chip, pam8610 chip is 10w per channel d level stereo audio amplifier. this board has over current temperature short circuit protection. features:work: d class quiescent current: 20ma efficiency: 90 percent rated output power: 10w plus 10 w 8 frequency response: 20hz to 50khz operating voltage: dc7.5 15v recommended supply voltage: 12v, the center pin of 12vdc is plus. pcb board size: 40 x 40 mm application:for your diy project other:it is not acceptable to connect the outputs of the l and r speakers together. packing list:1 x mini amplifier board dimensions: 1.57 in x 1.57 in x 0.71 in 4.0 cm x 4.0 cm x 1.8 cm weight: 0.74 oz 21 g "

Please Visit Our Website Arduinopak.com Or Contact No.0 3459056515 Material:Glass fiber Specification:This board uses PAM8610 chip, PAM8610 chip is 10W (per channel) D-level stereo audio amplifier. This board has over current / temperature / short circuit protection. Features:Work: D Class Quiescent Current: 20mA Efficiency: 90% Rated output power: 10W +10 W (8) Frequency response: 20Hz to 50KHz Operating voltage: DC7.5-15V Recommended supply voltage: 12V, the center PIN of 12VDC is +. PCB board size: (40 * 40) mm Application:For your DIY project Other:It is NOT acceptable to connect the - outputs of the L & R speakers together. Packing List:1 x Mini Amplifier Board Dimensions: 1.57 in x 1.57 in x 0.71 in (4.0 cm x 4.0 cm x 1.8 cm) Weight: 0.74 oz (21 g)

Type AV amplifier ManufacturerSony AUDIO Amplifier Output Details 200 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.15% - 7 channels (surround) 220 Watt - 4 Ohm - 20 - 20000 Hz - THD 0.15% - (surround) Response Bandwidth 10 - 50000 Hz Signal-To-Noise Ratio 100 dB POWER DEVICE Power Outlets 1 AC outlet AUDIO SYSTEM Type AV amplifier Subcategory AV components Functions AV amplifier Sound Output Mode Surround Sound Built-in Decoders DTS 96/24, DTS Neo:6, DTS decoder, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-ES decoder, Dolby Digital, Dolby Digital Surround EX, Dolby Pro Logic, Dolby Pro Logic II Additional Features A/B/A+B speaker switch Bass Control Yes Treble Control Yes HEADER Brand Sony Product Line Sony

Perfect circuit, small size without heat! Power supply 5-24V can work properly, the sound quality is beautiful the volume of high power Chip Type: TPA3116D2 Supply voltage: dc12-24v Output Power: 2x50w size: 25.6×37.2mm Package Included: 1 x 2x50W Power Digital Amplifier Board Views: 6

Product details of PAM8610 15W + 15W Two Channel Stereo Class D Amplifier Board Supply voltage: DC 7V-15V 2. Output power: 10w + 10w (8 load) 3. Efficiency: 90% 4. Shutdown Current: 4uA 5. Quiescent current; 20mA 6. SNR: 86% 7. Total harmonic distortion: 5W / 1KHz / 8 ---- 0.1% 8. Frequency range: 20Hz-20KHz 9. Input impedance: 15K 10. Output Impedance: 4-8 11. Amplifier board size: 30mm * 25mm * 2.5mm 1. The power supply voltage limit is 16.5V, do not use more than this voltage. 2. The power supply is recommended for 12v, 3A power supply filter better 3. 4-8 inch stereo speakers recommended. 4. Do not short-circuit the audio output to each other or shorted to ground. 5. Carefully check before electricity, ensure wiring is correct before electricity.

Technical parameters: 1 Supply voltage: DC 7V-15V 2 Output power: 10w + 10w (8 load) 3 Efficiency: 90% 4 Shutdown Current: 4uA 5 Quiescent current; 20mA 6 SNR: 86% 7 Total harmonic distortion: 5W / 1KHz / 8 ---- 0 1% 8 Frequency range: 20Hz-20KHz 9 Input impedance: 15K 10 Output Impedance: 4-8 11 Amplifier board size: 30mm * 25mm * 2 5mm How to use: 1 The power supply voltage limit is 16 5V do not use more than this voltage 2 The power supply is recommended for 12v 3A power supply filter better 3 4-8 inch stereo speakers recommended 4 Do not short-circuit the audio output to each other or shorted to ground 5 Carefully check before electricity ensure wiring is correct before electricity

its an hifi audio amplifier size and body structure can be seen in the pictures. audio input sourses are mention down below AUX-IN bluetooth 4.0 micro sd card USB FM radio on the back it has options written down below 2ch 50wx2 speaker push sockets out put for loud speakers (wired) removible power cable power switch fm antinna AUX-out (headphones) note: as its perfect working condtion will be given to the buyer after full check so kindly seriou buyer should contact Views: 38

TDA 7498 200watts class D amplifier comes with power supply can use 12 v or 24 v

Power Supply: DC 9-15V, Recommend 12V, 2A Above Output Impedance:4-8 ohms Efficiency: up to 90% Output Power: 15W+15W Chip: TDA7297 Dual-Channel Amplifier Chip ? PACKAGE INCLUDES 1 x TDA7297 Dual Channel 15W+15W Audio Power Amplifier Version B Module (DC 9V-15V) Views: 2

A very very powerful bluetooth amplifier that you can use with your mobile or any other device. TDA7492P 2x50W Bluetooth 4.0 Audio Receiver Digital Amplifier Board Specifications: Power Supply: 2.1 interface AC 8~25V Audio Input: Stereo input various versions of the Bluetooth connection, using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility. Output impedance: 8 ohms best(4, 6, 8, 16 ohm impedance can drive speakers) Output power: Add pre-5532 output foot(powered 25V, 6 ohm impedance output 2 x 50W, 8ohm impedance output 2 x 40W dual channel) It is convenient to directly adjust the gain of the second stage power amplifier, and can better drive the horn with a larger damping. Product Size: approx. 80*50*15mm/3.14*1.96*0.59'' Net weight: approx. 36g Quantity: 1pc Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Included: 1 x Audio Receiver Digital Amplifier Board

Its available in mind condition, sealed and 100% genuine. Made In Japan Only calls will be answered. Price is final DTS-ES (Extended Surround) decoder that realizes 6.1 channel surround playback Dolby Pro Logic II for superior sound field playback Equipped with an AAC decoder corresponding to BS digital voice All channels Same power Discrete configuration with the same response 6ch power amplifier Equipped with D terminal (compatible with D4 video), supporting higher quality video Various surround modes that can be selected to suit your source and preference Subwoofer's crossover frequency can be switched (80 Hz, 100 Hz, 120 Hz) Equipped with a 6-channel extension input terminal aiming for future potential and development MAIN SPECIFICATIONS - AVC-2850 Audio section Power Amplifier Rated output / Front: 90W + 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W + 135W (6Ω, 1kHz) THD0.7% Center: 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W THD 0.7% THD 0.7% Surround back: 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.) THD 0.7% Surround: 90 W + 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.05%), 135 W + 135 W (6 ohm, 1 kHz) 05%), 135 W (6 Ω, 1 kHz) THD 0.7% Practical maximum output / Front: 150W + 150W (6Ω, EIAJ) Center: 150W (6Ω, EIAJ) surround: 150W + 150W (6Ω, EIAJ) surround back: 150W (6Ω, EIAJ) Output terminal / Front: [A or B] 6 to 16 Ω, [A + B] 8 to 16 Ω, center, surround, surround back: 6 to 16 Ω Analog section Input sensitivity / impedance / 200mV / 47kΩ frequency characteristic / 10Hz ~ 100kHz: + 0dB, -3dB (direct mode) SN ratio / 102dB (direct mode) strain rate /0.005% (20Hz ~ 20kHz) (direct mode) rated Output / 1.2V [Digital part (D / A output)] Rated output / 2 V (at 0 dB playback) Total harmonic distortion ratio / 0.008% (0 dB at 1 kHz) SN ratio / 102 dB dynamic range / 96 dB [Phono Equalizer part (PHONO input REC OUT)] Input sensitivity / 2.5 mV RIAA deviation / ± 1 dB (20 Hz to 20 kHz) SN ratio / 74 dB (at JIS-A, 5 mV input) Distortion rate / 0.03% (at 1 kHz, 3 V output) Rated output / maximum output / 150 mV / 7 V Video section [Standard video terminal] Input level / impedance / 1 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz z: + 0 dB, -3 dB S video terminal Input level / impedance / Y (luminance) signal: 1 Vp - p / 75 Ω, C (color) signal: 0.286 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz: +0, -3 dB Component video terminal P / C (blue) signal: 0.7 Vp - p / 75 Ω, PR / CR (red) signal: 0.7 Vp - p / 75 Ω Frequency response / input level / impedance / Y (luminance) signal: 1 Vp - 5 Hz to 27 MHz: +0, -3 dB Overall Power supply / AC 100 V · 50/60 Hz Power consumption / 235 W (less than 2 W at standby)　 Maximum external dimensions / W 434 × H 171 × D 416 mm mass / 11.5 kg

panasonic D50 amplifier + equalizer+2 speaker 1 digital integrated amplifier su-D50 verry nice quality 135w 2 sterio graphic equalizer D50 3 2 3way speaker system D50 input power 120/music impedance 6 ohm verry best & punching sound quality just like woofer only serius buyer contact NOTE:- this ad offer only on karachi people.