DENON AVC-2850 150W/CHANNEL HI END HOME THEATER AMPLIFIER IN KARACHI

Its available in mind condition, sealed and 100% genuine. Made In Japan Only calls will be answered. Price is final DTS-ES (Extended Surround) decoder that realizes 6.1 channel surround playback Dolby Pro Logic II for superior sound field playback Equipped with an AAC decoder corresponding to BS digital voice All channels Same power Discrete configuration with the same response 6ch power amplifier Equipped with D terminal (compatible with D4 video), supporting higher quality video Various surround modes that can be selected to suit your source and preference Subwoofer's crossover frequency can be switched (80 Hz, 100 Hz, 120 Hz) Equipped with a 6-channel extension input terminal aiming for future potential and development MAIN SPECIFICATIONS - AVC-2850 Audio section Power Amplifier Rated output / Front: 90W + 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W + 135W (6Ω, 1kHz) THD0.7% Center: 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W THD 0.7% THD 0.7% Surround back: 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.) THD 0.7% Surround: 90 W + 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.05%), 135 W + 135 W (6 ohm, 1 kHz) 05%), 135 W (6 Ω, 1 kHz) THD 0.7% Practical maximum output / Front: 150W + 150W (6Ω, EIAJ) Center: 150W (6Ω, EIAJ) surround: 150W + 150W (6Ω, EIAJ) surround back: 150W (6Ω, EIAJ) Output terminal / Front: [A or B] 6 to 16 Ω, [A + B] 8 to 16 Ω, center, surround, surround back: 6 to 16 Ω Analog section Input sensitivity / impedance / 200mV / 47kΩ frequency characteristic / 10Hz ~ 100kHz: + 0dB, -3dB (direct mode) SN ratio / 102dB (direct mode) strain rate /0.005% (20Hz ~ 20kHz) (direct mode) rated Output / 1.2V [Digital part (D / A output)] Rated output / 2 V (at 0 dB playback) Total harmonic distortion ratio / 0.008% (0 dB at 1 kHz) SN ratio / 102 dB dynamic range / 96 dB [Phono Equalizer part (PHONO input REC OUT)] Input sensitivity / 2.5 mV RIAA deviation / ± 1 dB (20 Hz to 20 kHz) SN ratio / 74 dB (at JIS-A, 5 mV input) Distortion rate / 0.03% (at 1 kHz, 3 V output) Rated output / maximum output / 150 mV / 7 V Video section [Standard video terminal] Input level / impedance / 1 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz z: + 0 dB, -3 dB S video terminal Input level / impedance / Y (luminance) signal: 1 Vp - p / 75 Ω, C (color) signal: 0.286 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz: +0, -3 dB Component video terminal P / C (blue) signal: 0.7 Vp - p / 75 Ω, PR / CR (red) signal: 0.7 Vp - p / 75 Ω Frequency response / input level / impedance / Y (luminance) signal: 1 Vp - 5 Hz to 27 MHz: +0, -3 dB Overall Power supply / AC 100 V · 50/60 Hz Power consumption / 235 W (less than 2 W at standby)　 Maximum external dimensions / W 434 × H 171 × D 416 mm mass / 11.5 kg