Pa level unlocked

Type Portable PA System Feeling Jazz by Yamaha - The Musical Instruments Studio Contact: - Free Home Delievry:) 1 Year Company Warranty ! We are Authorized Dealer of Yamaha musical instruments and Audio Video Products in Pakistan. We sell only Original Products With Company Warranty @ lowest prices with compare to Market. Portable power for gigging or monitoring!Even lighter than its big brothers, the STAGEPAS 150M consists of a convenient, removable, powered mixer that fits inside the speakers for transport and a handy pole mount receptacle. Plus, a Stereo Link Out and ST SUB OUT jacks help you feed any external speakers, mixers, or recording devices. The STAGEPAS 150M is a compact all-in-one powered PA system aimed squarely at giving keyboardists a great way to monitor themselves as well as functioning as a mono PA. Packing 150-watts of power driving eight channels of audio, the STAGEPAS 150M offers great sound anywhere you go! Yamaha STAGEPAS 150M at a Glance: Power to go! 8-channel powered mixer 150 watts of Class D power Ideal for monitor speaker use Power to go! The STAGEPAS 150M is much lighter and more compact, provides a unique form factor and feature set optimized for keyboardists, and, most importantly, delivers the goods when it comes to sound quality. This single-speaker system also functions very effectively as ultra-portable mono PA system that is upgradeable to stereo with the simple addition of an optional powered speaker. 8-channel powered mixer The STAGEPAS 150M provides a total of eight input channels: two mono microphone/line inputs and three stereo line inputs. Along with the output for the supplied speaker, the built-in yet detachable mixer also has line outputs that can be used to connect additional powered speakers or to send the mixer's output to a main mixer or recording device. A convenient PHONES jack is also included for connecting a set of headphones. 150 watts of Class D power This power amplifier is all you'll need for most small venues and street performance situations, as well as personal monitoring applications. The advanced Class-D design delivers exceptional efficiency - ensuring high power amplification with low power consumption and minimal heat generation. This means you get superior sound quality and reliability in a remarkably compact unit. Ideal for monitor speaker use The STAGEPAS 150M is also effective as a monitor speaker system (especially for keyboard players, drummers and solo performers), thanks to its full-range reproduction, convenient mixing controls, and versatile speaker placement. Or the STAGEPAS 150 can be mounted on a standard speaker stand using an optional mount adaptor. Yamaha STAGEPAS 150M Features: Detachable Powered Mixer 150W of Class D power Two-way full-range speaker system Built-in EQ and 1-bit modulation reverb Music/Speech switch Auto limiter LED output level meter One speaker cable supplied Yamaha's STAGEPAS 150M is the perfect monitoring or PA system for gigging keyboardists!

ITEMS condition: new, original, factory sealed, unlocked, comes with complete accessories and also with 1 year international warranty Promotional offer: Buy 5 and get 1 free you can also order for 1)free shipping(Delivery takes 48 to 72 hours, which is about 2-3 days to deliver. Shipping: shipping is via FedEx, DHL, UPS = system and duration SKB Mixer Safe 30x26 Universal Mixing Board Case Behringer X32 32-Channel 16-Bus Total Recall Digital Mixing LS9-32 Digital 48kHz Live Sound Mixing Console Roland V-4EX - Video switcher mixer - 4-channel Roland V-800HD Multi-Format Video Switcher Roland VR-3 Portable Audio & Video Mixer with USB Port Allen & Heath US ZED-436 4-Buss Series Mixer Roland LVS-800 - Video switcher mixer - 8-channel MB1000 Meter Bridge for DM1000 Console Datavideo SE-500 Live Production Switcher - 4 Input Datavideo SE-800AV Audio Video Mixer Switcher & Mixer, 4-input TASCAM-TEAC America DM-4800 48-Channel Digital Mixer TASCAM-TEAC America DM-3200 32-Channel Digital Mixing Console KRK RoKit 8 G2 90W 8 Two-Way Active Nearfield Monitor KRK VXT 8 Powered Studio Monitor KRK Rokit RP10 3 Active Studio Monitor KRK RoKit 8 G2 90W 8 Two-Way Active Nearfield Monitor KRK Rokit 6 G2 Powered Studio Monitors Package KRK Rokit Powered 8 G2 Monitors, Mics, and More Package QSC K10 K Series Portable 10 Powered Loudspeaker QSC K8 8 Powered PA Speaker QSC KW122 12 2-Way Active Loudspeaker QSC Audio - KW181 - Product - 18 Ported, 1000W Subw Castor QSC K8 8 Powered Pa Speaker QSC K12 12 Powered Pa Speaker FOR MORE DETAILS ON HOW TO PURCHASE AND PLACE ORDER CONTACT US VIA EMAIL:- musicalinstrumentsshopdirect@gmail.com OR SKYPE musicalinstrumentsshopdirect Views: 148

Type Audio Midi Interfaces Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. You can record into the DAW in real time, whilst hearing a zero latency monitor feed from their input sources, controlled by a single knob for easy blending between direct monitoring and DAW playback. In common with other interfaces in the Scarlett series, input level controls feature a novel LED “signal halo” around the knob that indicates signal presence (green) and input overload (red), while a large-diameter silver volume knob gives you full and accurate control over monitor levels at all times, so whether you are mixing your music, or listening back to the track, the levels will always be in your control.Alongside the two Focusrite preamps are four RCA phono outputs, two of which are also available on balanced TRS sockets. These, coupled with the high-level headphone output and flexible monitoring capability make Scarlett 2i4 ideal for digital DJs. Send outputs 1 & 2 to the main PA and use 3 & 4 for cueing, or send all four to a mixer. The converter performance ensures that the quality of the audio streamed from the computer is sonically superb. An A/B source switch for monitoring either of two stereo output pairs via the high-level headphone output provide everything that’s required from a DJ interface.MIDI input and output are included in Scarlett 2i4, allowing capture of performances with MIDI keyboards and controllers and the ability to play parts out to instruments and sound modules, recording their audio via 2i4’s TRS inputs.Scarlett 2i4 comes complete with an excellent package of software tools to help you get your music down straight away. The latest version of the Focusrite Scarlett Plug-in Suite includes Compressor, Reverb, Gate and EQ in the form of VST/AU/RTAS plug-ins. Focusrite’s established Xcite+ bundle is also included, which features Ableton Live Lite (for all your production, performance and compositional needs), Novation’s Bass Station soft synth and over 1GB of royalty-free samples from Loopmasters.Scarlett 2i4 delivers high quality, 24-bit 96kHz audio to and from both Macintosh and Windows computers with USB 2.0 capability – and it’s bus powered so you only need to plug in the included USB cable to start making music. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Type Studio Microphone Product Description The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Type Studio Microphone An affordable dual diaphragm microphone suitable for many applications. The versatile Audio-Technica AT is a multi-pattern large diaphragm condenser microphone that provides consistent, superior performance. The AT mic offers you switchable cardioid, omnidirectional and figure-eight polar pattern settings. The AT mic's dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the Audio-Technica AT microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. Features Three switchable polar patterns: omni, cardioid, figure-of-eight Switchable 80 Hz high-pass filter and 10 dB pad Large diaphragm for smooth, natural sound and low noise State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Includes shock mount & protective pouch AT Multi-Pattern Large Diaphragm Condenser Microphone Specifications: Element: Externally-polarized (DC bias) condenser Externally-polarized (DC bias) condenser Polar Pattern: Cardioid, Omnidirectional. Figure-of-Eight Frequency Response: Hz Low Frequency Roll-Off: 80 Hz, 12 dB/Octave Open Circuit Sensitivity: —42 dB (7.9 mV) re 1V at 1 Pa Impedance: 120 Ohms Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) Noise: 17 dB SPL Dynamic Range (Typical): 132 dB, 1 KHz At Max SPL Signal-To-Noise Ratio: 77 dB, 1 KHz At 1 Pa Phantom Power Requirements: v DC, 4.7 Ma Typical Switches: Flat, Roll-Off; 10 dB Pad (Nominal) Weight: 412 G (14.5 Oz) Dimensions: mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter Output Connector: Integral 3-Pin XLRM-Type Accessories Furnished: AT Shock Mount For Threaded Stands; To Threaded Adapter; Soft Protective Pouch Audio-Technica Case Style: R5

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Large diaphragm, little price. The MXL 990 Condenser Microphone with shock mount has a silky, sweet high end while retaining tight, solid low and midrange reproduction. The 3/4" gold-sputtered diaphragm creates a professional sound suited for digital and analog recording. Attractive vintage body style with champagne finish. The 30Hz-20kHz frequency response is ideal for lead and background vocal, male or female. Includes custom shock mount, mic stand adapter, and case. Remember folks, this mic requires phantom power, so make sure your console or interface delivers it before ordering. There are a bazillion studio vocal mics on the market that break the magical $100 barrier, a traditionally unheard of price point for a studio vocal mic. Once that price floor was demolished, however, the market became flooded with offerings in the $ price range. MXL has emerged as a true leader in this market, and the MXL990 is MXL's flagship product in that category. If a well-built, good-sounding, versatile studio microphone for less than $100 sounds like a good fit for your current needs, you can't go wrong with the MXL990. FEATURES 3/4" gold-sputtered diaphragm Attractive vintage body style with champagne finish 30Hz-20kHz frequency response 130dB maximum SPL Sensitivity: 15MV/pa Equivalent noise: 20dB (A-weighted) SPECIFICATIONS 990 Condenser Microphone with Shockmount Type: Condenser pressure gradient condenser Diaphragm: 6 micron gold-sputterred Frequency response: 30Hz — 20kHz Polar Pattern: Cardioid Sensitivity: 15mV/Pa Impedance: 200 Ohms S/N Ratio: 80dB (Ref. 1Pa A-weighted) Equivalent Noise Level: 20dB(A weighted IEC ) Max SPL for 0.5% THD: 130Db Max SPL with -10dB cut: 130dB Power Requirements: 48V Phantom Power (+- 4V) Current Consumption:

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ? 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD 1000Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Extremely low self-noise and the high SPL transmission! A standard name in high-end recording studios around the world, Neumann mics deliver the professional touch that’s needed to capture high-quality audio. The TLM 103 is fast becoming a standard for home recording and the music industry. The large-diaphragm Neumann TLM-103 Microphone provides platinum-quality sound on a bronze budget, using transformerless circuitry for ultralow self-noise and handling high sound pressure levels up to 138dB. The TLM-103’s cardioid polar pattern optimizes attenuation of unwanted sound and suppresses feedback and comes with a rugged wire mesh grille that helps protect the capsule. This is the mic for everyone who, despite budget limitations, does not want to do without the uncompromising Neumann sound. It's not just for vocals -- the versatile Neumann TLM 103 studio microphone will let your voiceovers, guitars, and other acoustic instruments shine with "that Neumann sound" which draws audio professionals to the brand time and time again. The affordable TLM 103 is a large-diaphragm cardioid microphone featuring a transformerless circuit, low noise, high sound pressure level (SPL) handling, and a capsule based on the company's classic, significantly more expensive U87 capsule. This large-diaphragm condenser mic will do the job for a range of applications, from home recording to professional broadcasting and commercial recording studio use. Cardioid: An Excellent Choice for Most Recording Situations The TLM 103 boasts a large-diaphragm capsule with a universal cardioid pattern that draws in sound at the front of the microphone and rejects sound from the rear. When capturing vocals, recording instruments like the acoustic guitar, doing interviews, and so forth, a cardioid mic is often the way to go. With this Neumann microphone, off-axis sounds are rendered naturally while isolation is increased. Looks and Sounds Like a Neumann Its K 103 large-diaphragm capsule, based on the K 87 from the company's U 67 and U 87 microphones, has a flat frequency response up to about 4 kHz, and above that, a wide 4 dB presence boost. So that you know it's a Neumann, the TLM 103 is addressed from the front and is marked with the red Neumann logo on the body of the microphone. The microphone keeps plosives, pops, and other unwanted noises in check, thanks to its large wire mesh headgrille, which protects the capsule. You can use a pop filter with the TLM 103 if you want, but you may not really need it unless you are exceptionally spitty when you sing or speak. To further prevent noise from interfering with the mic's performance, the TLM 103's entire internal construction is elastically mounted. What's more, the capsule is set on an elastic mount. Since its frequency range actually reaches below 20 Hz, the lowest of low bass signals are reproduced without coloration. It's because of this low frequency extension that the TLM 103 is more sensitive to structure-borne interference and wind noise. Features Large diaphragm cardioid microphone Pressure gradient transducer with with one-diaphragm capsule Transformerless circuitry Extremely low noise: 7 dB-A Includes swivel mount Straightforward handling for homerecording and professional studios TLM 103 Microphone Specifications: Acoustical operating principle Pressure gradient transducer Directional pattern Cardioid Frequency range 20 Hz... 20 kHz Sensitivity at 1 kHz into 1 kohm 23 mV/Pa Rated impedance 50 ohms Rated load impedance 1 kohms Equivalent noise level, CCIR1) 17.5 dB Equivalent noise level, A-weighted1) 7 dB-A Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 76.5 dB Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 87 dB Maximum SPL for THD 0.5%2) 138 dB Maximum output voltage 13 dBu Dynamic range of the microphone amplifier (A-weighted) 131 dB Supply voltage (P48, IEC 61938) 48 V ± 4 V Current consumption (P48, IEC 61938) 3 mA Matching connector XLR3F Weight approx. 450 g Diameter 60 mm Length 132 mm Views: 2

Not an imitation of the past, but a modern studio microphone for the future. For decades Neumann has been setting standards in the world of studio microphones, and the TLM 107 follows closely to a tradition of innovation. With five directional characteristics and a novel-operating concept, this standard-setting large-diaphragm microphone provides sound without any coloration. Featuring equally impressive level stability and low self-noise, it captures everything from the softest whisper to thundering drums. Use the TLM 107 for everything from broadcasting, to studio and demanding home recording applications. The TLM 107 doesn't try to imitate a vintage sound or dated relic, in fact it's just the opposite, a modern studio mic with detailed, high-precision sound reproduction that is very close to the original source. Neumann Engineering The newly developed sound transducer, which was designed especially for this microphone, is impressive with its outstanding impulse fidelity. The great consistency of the five polar patterns, omnidirectional, cardioid and figure-8, with the intermediate patterns wide-angle cardioid and hypercardioid, is also unusual for a large-diaphragm capsule. The TLM 107 provides optimal sound not only for the cardioid setting; it also ensures maximum precision over the entire frequency range for all of the other directional characteristics. The sound always remains balanced, with an almost linear reproduction up to 8 kHz, and a slight boost in the highest frequencies that lends presence and freshness to the voice. Here particular attention has been paid to the natural reproduction of speech sounds, especially the critical “s” sound. The grille is acoustically optimized for low sensitivity to pop sounds. In addition, the sound transducer is edge-terminated, with both diaphragms at ground voltage. Specifically, this ensures considerably reduced sensitivity to dust and humidity. Features Multipattern large diaphragm microphone with 5 polar patterns (omni, wide cardioid, cardioid, hypercardioid, figure-eight) Navigation switch with LED illuminated display for polar pattern, PAD and low cut Sound characteristics: transparent, natural reproduction of human voice, outstanding transient response Balanced sound in all 5 polar pattern settings TLM 107 Condenser Microphone Specifications: Acoustical operating principle Pressure gradient transducer Directional pattern Omni, wide angle cardioid, cardioid, hypercardioid, figure-8 Frequency range 20 Hz... 20 kHz Sensitivity at 1 kHz into 1 kohms 11 mV/Pa Rated impedance 50 ohms Rated load impedance 1000 ohms Equivalent noise level, CCIR1) 22 dB Equivalent noise level, A-weighted1) 10 dB-A Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 72 dB Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 84 dB Maximum SPL for THD Maximum SPL for THD Maximum SPL for THD Maximum output voltage 10 dBu Supply voltage (P48, IEC 61938) 48 V ± 4 V Current consumption (P48, IEC 61938) 3.2 mA Matching connectors XLR3F Weight 445 g Diameter 64 mm Length 145 mm Capture clear and accurate sound in any setting with a Neumann TLM 107 condenser microphone! Microphone Type: Condenser Polar Pattern: Cardioid, Wide Cardioid, Omni, Hypercardioid, Figure-8 Frequency Response: 20Hz-20kHz Max SPL: 141dB Output Impedance: 50 ohms Signal to Noise Ratio: 88dB (A weighted) Included Accessories: Stand mount, display case Manufacturer Part Number: TLM107MT

Offering Brand new Studio Condenser Microphone. Microphone is for building a home studio. This microphone gives you high quality sound what you can compare with other brand microphone such as behringer b2 and m audio nova. Good to lift your home studio with a best microphone. Fixed Shockmount to attach with stand. Cable is FREE (Long and low noise HQ cable) TABLE STAND IS FREE (Height = 1.5 feet) Works with XLR to 3.5mm stereo cable. For PC Microphone Hub (Works with some laptop too). You can make it work with line in too. But you need to get an additional driver box which is called Mic-PPB what you can get with it. Contact me for more details or read below. Microphone Specifications: Unit: Super-Cardioid Pressure Gradient Transducer Directivity: Omni-directional Frequency Response: 20Hz-16kHz Sensitivity: -38dB (0dB=1V/Pa at 1kHz) Output Impedance: 150 Ohm 30% Polarity (at 1kHz) Load Impedance: > Ohm Equivalent Noise Level: 16dBA Max. Sound Pressure Level: 132dB (at 1kHz

Overview Vocal Studio Pro is the all-in-one solution for your computer-recording projects. Lay down vocals on your latest tune. Narrate your next podcast. Add a voice-over to your multimedia production. Vocal Studio Pro does it all. The unique combination of high-performance hardware and easy-to-use software makes it possible. Simply plug the microphone into the interface, connect the interface to the computer, put on the headphones, and you're ready. Completing this powerful package are two complementary software selections: Avid® Pro Tools® Express and Ignite by AIR, the all-new music creation software. Together, they deliver a comprehensive path for transforming the ideas in your head into musical works and ideas you can share with the world. Package Contents: M-Audio M-Track Interface M-Audio large diaphragm vocal microphone M-Audio studio headphones Avid Pro Tools Express with iLok USB key Ignite by Air (Download) Mic clip XLR microphone cable USB cable User Guides Safety & Warranty Manual Achieve Accurate Audio Recordings Breathe new life into your recordings with this large-capsule M-Audio microphone. Combining low-noise electronics and high sensitivity, this microphone ensures recordings that are faithful to the original source and free from distortion or unwanted coloration of the sound. The rugged metal body and capsule offers protection and reliability. Expandable Interface M-Track opens the door to enhanced computer-based music making. In addition to providing a superb sounding XLR connection—complete with phantom power—for your M-Audio microphone, M-Track offers the right connections for any audio source or instrument—even an electric guitar! Insert jacks allow you to incorporate your favorite effects. The low-profile design delivers professional control in a portable package. Pro Tools Express Compose, record, edit, and mix using the tools the professionals use. Pro Tools Express starts with 16 simultaneous stereo or mono audio tracks. Add in the popular Boom, Xpand!2, and Structure Free player virtual instruments from AIR Music Technology-all included. Finish off with dozens of high-powered effect plug-ins, including the in-demand AIR effects. Plus, Pro Tools Express offers session file compatibility with the entire Pro Tools family, so you can take your tracks to the finest studios around the world. Pro Tools Express includes an iLok 2 USB key-a Ignite Ignite provides a refreshingly original and musician-centric way to quickly capture, combine, and arrange your musical ideas. The intuitive graphic interface encourages you to experiment and explore new directions. Smart MIDI Chord and Phrase Players empower your ideas and bring them to life through over 275 superior instruments sounds created by AIR Music Technology. When you're ready to collaborate with other musicians or take your ideas to the next level, you can share them through SoundCloud, or export your WAV, MP3 and MIDI files and import them into Pro Tools-or any DAW software. Best of all, Ignite offers seamless integration with your M-Audio keyboard controller, with no set-up chores to perform. Avid, the Avid logo and Pro Tools are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries Features M-Audio Large Capsule Condenser Microphone Top quality back electret condenser transducer High sensitivity and low self noise Built-in pre-amplifier circuitry for unrivalled sound performance Wide frequency response range LED power indicator Transducer Principle: Back Electret Condenser Directivity Characteristic: Cardioid Frequency Response: 30Hz-20kHz Sensitivity: -38dB±2dB (0dB=1V/Pa at 1kHz) Output Impedance: % (at 1kHz) Load Impedance: ≥Ω Equivalent Noise Level: ≤22dB A (IEC ) Max. Input SPL: 140dB (THD ≤1.0ï¼… at 1kHz) Power Requirements: 48V DC Phantom Power Body Dimensions: Ø54 x 128mm Net Weight: 371g

Product Description Musicians, artists, and bloggers agree - the V69 (Mogami(R) Edition) is the standard of excellence for tube condenser microphones. Tested against mics costing barrels more, the V69 continues to impress with its rich midrange, punchy forward character, and mix-ready vocals. Providing a winning combination of both crispness and warmth, the V69 is a must-have tool for the professional and home studio environment. The MXL V69 is a classic large-diaphragm tube microphone. This special package includes Mogami cables, a shock mount and more! The MXL V69's classic sound quality enhances vocals as well as instrument performances. The extremely low noise level, wide dynamic range and warm sonic characteristics make the V69 a perfect complement to all digital recording devices. Frequency range is 20Hz - 20kHz and equivalent noise is a low 12dB. Includes all the accessories -- power supply, Mogami cables, shock mount and windscreen - in a hard case. Features: Internally wired and supplied with Mogami cable Vintage Tube Sound 25mm (1 in.) large-capsule condenser Complete microphone system with Mogami 7-pin and XLR Cable Vintage cosmetics 24 carat gold plated grill Durable brass enclosure Supplied with carrying case ​ SPECIFICATIONS V69 Mogami Edition Tube Microphone Type: Condenser pressure gradient mic with large 25mm diaphragm capsile Frequency Range: 20Hz-18kHz Polar Pattern: Cardioid Sensitivity: 22mV/Pa Impedance: 200W S/N Ratio: 72dB (Ref. 1Pa A-weighted) Equivalent Noise Level: 22dB (A weighted IEC ) Max SPL for 0.5% THD: 140dB Power Requirements: Vac, Hz Size: 1.96in. x 7.48in. (50mm x 190mm) Weight: 1lb Metal Finish: Black/Gold Package Includes: Micrphone Power Supply Mogami Cables Shock Mount Windscreen Hard Case

Camera Wireless Microphones The BOYA Camera Wireless Microphones BY-WM5 wireless microphone is compact, high performance, lightweight, and compatible with DSLR cameras, camcorders, audio recorder etc. It features experience more freedom of movement while recording, excellent sound quality, great portability, easy setup, two way communication system, and approximate 50m (164 ft.) operation range. It consists of a transmitter, receiver, two piece of earphone (one is with speaker), an audio signal cable, a lavalier/lapel microphone. Specifications RF Modulation: GFSK (Gauss Frequency Shift Keying) Frequency band: 2.4GHz (2405-2478MHz) Frequency response: 35Hz-14KHz±3dB Signal/Noise: 76dB or more Distortion: 0.1% or less (32?, 1 KHz, 65 mW output) FR output level: 5 mW Earphone output level: 32?, 65mW Reception sensitivity: -85dB+/- 3dB / 0dB=1V/Pa, 1KHz Audio input connector: 3.5mm mini jack Operation range: 50m (164 ft.) Power requirements: 3.0V DC (Two LR03/AAA size batteries) Consumption power: Transmitter: 3.3V/110 mA Receiver: 3.3V/100 mA Battery life: Transmitter: Approx. 3.5 hours Receiver: 4 hours Dimensions: Transmitter: 60x86x28mm Receiver: 60x86x41mm Weight: Transmitter: 136g (Without battery) Receiver: 152g (Without battery) Views: 5

New bm 800 phantom power Home Studio Mic New bm 800 phantom power Home Studio Mic chk in youtube Specification: Directivity: Omni-Directional Frequency Response: 20Hz-16kHz Sensitivity: -38dB±2dB(0dB=1V/ Pa at 1kHz) Output Impedance: 150?±30%(at 1kHz) Load impedance: ?1000 ? Equivalent Noise level: 16dBA Max. Sound Pressure Level: 132dB(at 1kHz?1%T.H.D) S/ N Ratio: 78dB Current Consumption: 3mA Microphone Material: Steel net+Zinc alloy hand holding part Microphone Size: Approx. 16x4.8cm/ 6.30x1.89" Length of Cable: Approx. 253.5cm/ 99.80" Views: 96