Obd 5v s

1st time in Pakistan Eco OBD 2 for Petrol Cars. Promotion EcoOBD2 2017 Newest EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save Plug&Drive OBD 2 scanner. Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission. What is EcoOBD2 Chip Tuning Box? EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car. EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector. EcoOBD2 help you save fuel consumption: - Up to 15% fuel savings The main difference between EcoOBD2 Chip Tuning Box and Remapping tuning methods is that EcoOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. EcoOBD2 is equipped with the engine protection function and 100% safe for your car engine. EcoOBD2 produced on the printed circuit board in SMD technology. EcoOBD2 Chip Tuning Boxes are high quality. EcoOBD2 Installation and Calibration 1 - Pull the Car Key out from the ignition. 2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2 3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car) 4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU) 5 - Start up the engine. 6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving. Disclaimer: Dear buyer plz note that we are just selling product and are not responsible for the description as manufacturer has mentioned. Shipping cost within Lahore Rs.150- and out of Lahore Rs.250/- will be charged for delivery on next working day.

GEMINI S ARGB Mid-Tower Gemini S is an advanced gaming mid-tower case with a full-sized tempered glass cover and an integrated ARGB lighting system that delivers everything a gamer needs.   Buy Now Video Integrated RGB Lighting Gemini S features COUGAR’s exclusive Trelux integrated lighting system. This advanced design allows it to display fourteen amazing lighting effects without installing any additional devices in the case and control them through the integrated lighting button. Trelux can also work connected to a COUGAR Core Box v2 or to a compatible motherboards’ 5V connection for system-wide lighting synchronization. Controllable directly through a convenient front panel button, Trelux can also work connected to a COUGAR Core Box v2 or to a compatible motherboards’ 5V connection for system-wide lighting synchronization. Gemini S is certified for compatibility with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync. Elegant Design Gemini S’ brushed metal-like front panel gives it a unique look that sets it apart from other compact cases. This texture is also a great companion to the integrated lighting since the powerful lights coming out of it benefit from the reflective surroundings that help reinforce the effects. Full Side Visibility To help you appreciate your system’s full beauty, a full-sized tempered glass side window will allow you to contemplate your system’s interior. Great Support for Components You won’t believe how powerful a gaming beast you can build inside Gemini S. Its advanced support for graphics cards (up to three 410mm-long graphics cards) will allow you to enjoy the latest games with smooth framerates. Top-notch Cooling Gemini S’ compact layout allows you to install eight fans and three water cooling radiators, with the front and top ones up to 360mm. This immense cooling potential will enable you to choose freely the components you want in your build. Water cooling radiator support Air cooling support Incredible Storage Up to two 3.5″ HDDs and five 2.5″ SSDs or seven 2.5″ SSDs will provide you with all the storage you need to install games and store all kinds of media. * There are two SSD trays in this case. Please select two locations you prefer to install. Specifications Product Name Gemini S Case Form Factor Mid-Tower Dimensions (WxHxD) 210 x 495 x 463 (mm) 8.27 x 19.49 x 18.23 (in) Motherboard Formats Mini ITX / Micro ATX / ATX / CEB / E-ATX I/O Panel USB3.0 x 2, USB2.0 x 1, Mic x 1 / Audio x 1, RGB Control Button 3.5" Drive Bay 2 2.5" Drive Bay 5+2 (converted from 3.5" drive bays) / (2 SSD trays included) Expansion Slots 7 Cooling Fan Support Front 120mm x 3 Top 140mm x 2 / 120mm x 3 Rear 120mm x 1 (pre-installed) PSU Cover 120mm x 1 (for HDD Cooling) Maximun Number of Fans 8 Max. Water Cooling Support Front 360mm / 240mm / 120mm Top 360mm / 280mm / 240mm / 140mm / 120mm Rear 120mm Max. Graphics Card Length 410 (mm) / 16.14 (in) (Horizontal graphics card slots are compatible with RTX 3090/3080/3070.) Max. CPU Cooler Height 175 (mm) / 6.89 (in) PSU Standard ATX PS2 Max. PSU length 200 (mm) / 7.9 (in) Onboard Lighting System Trelux Lighting with Addressable RGB LEDs and Dynamic Lighting Effects in the Front Panel Cable Management Yes

Extended 7 X fans 4-pin interface, using 3p and 4p 2510 compatible terminals to solve the lack of motherd interface and centralized processing of fan wiringsAt the same time, 9 X 3p magic lights with 5v 3 pin plug interface, using 16-key RF remote control with lock, with memory mode, more than 100 change modes, compatible with all data transmission signals on the market, 3-pin interface cable sequence: VDD, DA, GND (+ 5v, da,-) Symphony 5V supplySocket description: 4-pin plug fan, 3 pin plug 3-wire plug-in controlled magic light strip + 5v, da,-The remote control can be adjusted in 6 speeds without the need to connect to the computer's motherd. The back of the hub d is provided with adhesive, which is convenient for sticking in a flat place. Also with 3 fixed filigree holesThe maximum fan port single port current exceeds 0.5A, and the overall controller fan port maximum current exceeds 4A.

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module" Box Pack - No Warranty

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module Box Open - Never Used - No Warranty

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic. Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic. Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module" Facebook page;ElectronicsArena.com Box Pack - No Warranty

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic. Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic. Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module" Facebook page;ElectronicsArena.com

this is a 5v 4 channel relay interface board, be able to control various appliances, and other equipments with large current. it can be controlled directly by micro controller arduino, , avr, pic, dsp, arm, arm, msp430, ttl logic. description: 5v 4 channel relay interface board, and each one needs ma driver current. equiped with high current relay, ac250v 10a dc30v 10a. standard interface that can be controlled directly by microcontroller arduino, , avr, pic, dsp, arm, arm, msp430, ttl logic. indication led s for relay output status. package includes: 1 x 4 channel 5v relay module" Box Pack - No Warranty

This is a 5V 4-Channel Relay interface board Be able to control various appliances, and other equipments with large current It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) 5V 4-Channel Relay interface board, and each one needs mA Driver Current Equiped with high-current relay, AC250V 10A; DC30V 10A Indication LED’s for Relay output status Input IN1, IN2, IN3, IN4 signal low level effectively VCC, GND power input end, can supply power alone Power supply end JD - VCC Support all single-chip control, industrial area, PLC control, household intelligent control Application： Supports all MCU control The industrial field PLC control Smart home control Size: 7.5x5.6x1.8cm 2.95x2.2x0.7 Package includes 1 x 4 channel relay module" Box Pack - No Warranty

Integrated RGB Lighting Gemini S features COUGAR’s exclusive Trelux integrated lighting system. This advanced design allows it to display fourteen amazing lighting effects without installing any additional devices in the case and control them through the integrated lighting button.       Controllable directly through a convenient front panel button, Trelux can also work connected to a COUGAR Core Box v2 or to a compatible motherboards’ 5V connection for system-wide lighting synchronization. Gemini S is certified for compatibility with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync.   Elegant Design Gemini S’ brushed metal-like front panel gives it a unique look that sets it apart from other compact cases. This texture is also a great companion to the integrated lighting since the powerful lights coming out of it benefit from the reflective surroundings that help reinforce the effects.   Full Side Visibility To help you appreciate your system’s full beauty, a full-sized tempered glass side window will allow you to contemplate your system’s interior.   Great Support for Components You won’t believe how powerful a gaming beast you can build inside Gemini S. Its advanced support for graphics cards (up to three 410mm-long graphics cards) will allow you to enjoy the latest games with smooth framerates.   Top-notch Cooling Gemini S’ compact layout allows you to install eight fans and three water cooling radiators, with the front and top ones up to 360mm. This immense cooling potential will enable you to choose freely the components you want in your build. Water cooling radiator support Air cooling support   Incredible Storage Up to two 3.5″ HDDs and five 2.5″ SSDs or seven 2.5″ SSDs will provide you with all the storage you need to install games and store all kinds of media. * There are two SSD trays in this case. Please select two locations you prefer to install.

Read Add Only Serious buyers Call Or Sms ony my number Meeting Location: Hajji Camp Near railway Station Or Kalma Chowk: Price is Final For Charger And Cable 500rs: Sky Original Charger and Data cable: 5v 2ampere For all sky vega cellPhone,s fast charging fast data transfer new Box Pack - No Warranty

Call Or Sms Only Serious buyers Please: meeting location: Hajji Camp Near Railway Station LHR: Price 600rs With TWO LG data Cables: RoHs Branded Usb Charger: 100% Orignal Authentic Adapter For All Mobiles And Tablets: Output Full 5v 2ampere On Each Port: Very Powerfull And Fast Charger: Charge Phablets Tablets Mobile,s No Issue: Charge TWO Devices At One Time: WHITE Color.. Box Pack - No Warranty

Warranty Three years International 1 Year National SSD Unformatted Capacity 120 GB Max Sequential R/W (ATTO) 555 MB/s sequential read 515 MB/s sequential write Max Random 4k Write (IOMeter k IOPS (4k aligned) Interface SATA 6Gb/s Technology No Form Factor 2.5 inch DRAM Cache Memory No Weight 80g Voltage 5V ±5% Power Consumption (active) 2.5W Max Power Consumption (idle/standby/sleep) 0.6W Max S.M.A.R.T. Support Yes Shock G MTBF hours Price is Fixed Condition: - Warranty: 1 Year

Dell Slim Chocolate Charger 19.5Volt 4.62Amp Also Available in 3.34A Checking Warranty Item specifics Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more Brand: for Dell Bundled Items: Power Cable Type: AC/Standard Voltage: 19.5 V Compatible Brand: For Dell Wattage: 90W Compatible Product Line: For Dell Inspiron, For Dell Latitude, For Dell Studio, For Dell Studio XPS, For Dell Vostro, For Dell XPS ampere: 4.62A MPN: PA-3E Max: 90W Output Voltage(s): 19.5 V, 19.5V UPC: Does not apply

New HP Laptop Charger 18.5V, 3.5 A (65W) 10/10 condition. My Hp Laptop is burned due to some reason now I want to sell my HP Charger. its 100% ok I also used it for my laptop no problem with it. It’s 65Watt small pin charger