Module breakout board hp

The supply board is equipped with LED voltage display, which can display the voltage of the main supply in real time. The floppy drive 4PIN is connected to the main supply and can be switched on and off synchronously. Press the white button to turn on the switch. When you plug in the cord, press the switch, the three-color LED flashes, and the LED display shows the voltage.

Includes antenna and battery in package.New only used once in academic project. Battery (free) 4V, mAh. Antenna wire length 2m Features 1) Quad-Band MHz - would work on GSM networks in all countries across the world. 2) GPRS multi-slot class ) GPRS mobile station class B 4) Compliant to GSM phase 2/2+ 5) Class 4 (2 W at MHz) 6) Class 1 (1 W at MHz) 7) Control via AT commands - Standard Commands: GSM | Enhanced Commands: SIMCOM AT Commands. 8) Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). 9)Embedded TCP/UDP stack - allows you to upload data to a web server. 10) RTC supported. 11) Low power consumption - 1.5mA(sleep mode) 12) Industrial Temperature Range - -40°C to +85 °C datasheets can be provided.

The adapter card adopts imported MOS tube to switch on and off to ensure the effectiveness of the switch. The adapter card uses LEDs to display the working voltage of the supply in real time. The adapter card adopts multi-layer technology to ensure that the board will not be hot when the is in high current. The synchronization switch is added to realize the function of switching on and off synchronously with the main supply.

Product description XBee Adapter Shield Breakout Board For XBee Module NEW

HP BL480c Blade Server Processors: Quad-Core Intel Xeon Processor Series Quad-Core Intel Xeon Processor Series Dual-Core Intel Xeon Processor Series Processor Cache Memory: 1x6 MB Level 2 cache memory ( Series) 2x4 MB Level 2 cache memory ( Series) 2x6 MB Level 2 cache memory ( Series) Chipset: Intel P Chipset Memory: PC Fully Buffered DIMMs (DDR) running at 533 MHz Maximum 64 GB (8 x 8 GB) or (6 x 8GB + 4 x 4GB) RAID Controller: Smart Array P400i Controller 256 MB memory module supports RAID 0/1/5 Available upgrades: Battery-backed write cache (BBWC) or 512 MB memory module with battery-backed write cache (BBWC) (both upgrades support RAID ) Ethernet Controller: Embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine Embedded NC326i Dual Port Gigabit NICs (1) additional NIC dedicated to iLO 2 Management Fibre Channel Controllers Two optional Fibre Channel HBAs are supported by the HP ProLiant BL480c. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits ordered separately. Compatible SAN: HP ProLiant BL480c server blades are optimized for HP StorageWorks MSA, EVA, and XP. Availability: Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Four hot-plug SAS/SATA hard drive bays and integrated RAID (Smart Array P400i) controller on every server blade (Battery-backed write cache is optional.) Redundant ROM on each server blade ECC Memory Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing Security: Power-on password Administrator's password Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption Integrated Lights-Out 2 can be disabled via a Global Setting For details, feel free to contact. M. Waqar Shah Trade Orient Pakistan Address: Shop # M-57, Mezzanine floor, Odeon Center, Saddar, Karachi. Cell: - Email: , Box Open - Never Used- Warranty: 1 Year

DESCRIPTION This simple breakout board allows 3.5mm TRRS audio jacks to be easily adapted to a solderless breadboard or prototype PCB. PACKAGE INCLUDES: 3.5mm TRRS Audio Jack Breakout 1×4 Male header KEY FEATURES OF 3.5mm TRRS AUDIO JACK BREAKOUT: TRRS stands for Tip / Ring1 / Ring2 / Sleeve and is designed for use with audio jacks that have 3 audio channels such as a Left / Right / Microphone or 2 audio channels and a video channel along with a ground sleeve. The TRRS female socket can also be used with the traditional TRS style male plug that has 2 audio channels and a ground sleeve. In that case, both the Sleeve and Ring2 will be connected to ground and the Ring1 and Tip will carry the two audio channels. Ring1 normally carries the RIGHT audio channel, while Tip normally carries the LEFT audio channel. If there is a 3rd channel, it usually carries a microphone or video channel. Module Connections The adapter brings out the four TRS / TRRS signals as listed below. 1 x 4 Header SLEEVE = Ground RING2 = Typically Microphone or video channel. Will be same as SLEEVE when used with TRS jack RING1 =Audio RIGHT channel TIP = Audio left channel Mention that you found this ad on DealMarkaz.pk when you call.

HMC6352 Original SparkFun This is a very simple breakout board for the popular HMC6352. We really enjoy the simplicity and ease of use with the HMC6352. If you need simple, clean, degree resolution compass heading, this is the way to go. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com Founded In 2003: We Deal In All Kinds Of Electronic Components, Test And Measuring Instruments, Variety Of Multimeters, Toolkits, Hand Tools, Universal IC Progammers, Etc Matrix Online Store Dedicated To Electronics Engineers, Hobbyists and Students. Visit www.matrixelectronic.com Address: Shop#2, Hassan Centre Near Passport Office Saddar karachi.

Details: Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Gboard can be used as a GSM/GPRS data transfer or RC Wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack. Box Open - Never Used - No Warranty

Details: Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless. Gboard can be used as a GSM/GPRS data transfer or RC Wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Details: Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless. Gboard can be used as a GSM/GPRS data transfer or RC Wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack." Facebook page;ElectronicsArena.com

Details: Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless. Gboard can be used as a GSM/GPRS data transfer or RC Wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack." Box Pack - No Warranty

details: gboard is a unique arduino board which features a sim900 gsm gprs module, an xbee socket, nrf24l01 plus module interface and an atmega328p controller. this board will add wireless xbee nrf24l01 plus control as well as gsm gprs connectivity to your projects. it s great for anything from home automation to robot control. the possibilities are endless gboard can be used as a gsm gprs data transfer or rc wireless communication project development platform. gboard support wide range power supply and micro sd for mass storage. there are some 3pin electronic brick sensor brick interface breakout on board, it offer an easy way for a quick prototyping. the board requires ftdi basic board to upload sketch, you can use our foca board to do it. gboard can be powered by a mini usb, power jack." Box Pack - No Warranty

Details Gboard is a unique Arduino board which features a SIM900 GSMGPRS module, an XBee socket, nRF24L01 module interface and an ATMega328P controller. This board will add wireless XBee nRF24L01 control as well as GSMGPRS connectivity to your projects. Its great for anything from home automation to robot control. The possibilities are endless Gboard can be used as a GSMGPRS data transfer or RC Wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack. Box Pack - No Warranty

XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board.It can directly plug in with Arduino, and use D0-D3 of the basic board to connect with the XBee module.Its SPI and UART bus is convert the logic level 5V to 3.3V,and it's stackable, you can connect the 3.3V IO module or shield to this shield directly. The ""Logic Level Converter"" show in the below allowed your arduino board connect to different IO logic level module safety.With Logic Level Converter (3.3V to 5V or 1.8V to 5V or 1.8V to 3.3V). With CC module connecter. Provide maximal 800mA under 3.3V. 4 indicator LED (RSSI, ASS, Din, Dout) for XBee. Switchable of communication with FTDI-USB /Base board. Full 2.54mm break out for XBee. With wireless program hardware interfaces. Reset button for base board. Stackable interfaces."

XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board It can directly plug in with Arduino, and use D0-D3 of the basic board to connect with the XBee module Its SPI and UART bus is convert the logic level 5V to 3 3V,and it's stackable, you can connect the 3 3V IO module or shield to this shield directly The Logic Level Converter show in the below allowed your arduino board connect to different IO logic level module safety With Logic Level Converter 3 3V to 5V or 1 8V to 5V or 1 8V to 3 3V With CC module connecter Provide maximal 800mA under 3 3V 4 indicator LED RSSI, ASS, Din, Dout for XBee Switchable of communication with FTDI-USB /Base board Full 2 54mm break out for XBee With wireless program hardware interfaces Reset button for base board Stackable interfaces " Box Pack - No Warranty