Mini board round

Material:Glass fiber Specification:This board uses PAM chip, PAM chip is 10W (per channel) D-level stereo audio amplifier. This board has over current / temperature / short circuit protection. Features:Work: D Class Quiescent Current: 20mA Efficiency: 90% Rated output power: 10W +10 W (8) Frequency response: 20Hz to 50KHz Operating voltage: DCV Recommended supply voltage: 12V, the center PIN of 12VDC is +. PCB board size: () mm Application:For your DIY project Other:It is NOT acceptable to connect the - outputs of the L & R speakers together. Packing List:1 x Mini Amplifier Board Dimensions: 1.57 in x 1.57 in x 0.71 in (4.0 cm x 4.0 cm x 1.8 cm) Weight: 0.74 oz (21 g) Box Pack - No Warranty

Material:Glass fiber Specification:This board uses PAM chip, PAM chip is 10W (per channel) D-level stereo audio amplifier. This board has over current / temperature / short circuit protection. Features:Work: D Class Quiescent Current: 20mA Efficiency: 90% Rated output power: 10W +10 W (8) Frequency response: 20Hz to 50KHz Operating voltage: DCV Recommended supply voltage: 12V, the center PIN of 12VDC is +. PCB board size: () mm Application:For your DIY project Other:It is NOT acceptable to connect the - outputs of the L & R speakers together. Packing List:1 x Mini Amplifier Board Dimensions: 1.57 in x 1.57 in x 0.71 in (4.0 cm x 4.0 cm x 1.8 cm) Weight: 0.74 oz (21 g)" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Material:Glass fiber Specification:This board uses PAM chip, PAM chip is 10W (per channel) D-level stereo audio amplifier. This board has over current / temperature / short circuit protection. Features:Work: D Class Quiescent Current: 20mA Efficiency: 90% Rated output power: 10W +10 W (8) Frequency response: 20Hz to 50KHz Operating voltage: DCV Recommended supply voltage: 12V, the center PIN of 12VDC is +. PCB board size: () mm Application:For your DIY project Other:It is NOT acceptable to connect the - outputs of the L & R speakers together. Packing List:1 x Mini Amplifier Board Dimensions: 1.57 in x 1.57 in x 0.71 in (4.0 cm x 4.0 cm x 1.8 cm) Weight: 0.74 oz (21 g)" Facebook page;ElectronicsArena.com

material:glass fiber specification:this board uses pam chip, pam chip is 10w per channel d level stereo audio amplifier. this board has over current temperature short circuit protection. features:work: d class quiescent current: 20ma efficiency: 90 percent rated output power: 10w plus 10 w 8 frequency response: 20hz to 50khz operating voltage: dcv recommended supply voltage: 12v, the center pin of 12vdc is plus. pcb board size: 40 x 40 mm application:for your diy project other:it is not acceptable to connect the outputs of the l and r speakers together. packing list:1 x mini amplifier board dimensions: 1.57 in x 1.57 in x 0.71 in 4.0 cm x 4.0 cm x 1.8 cm weight: 0.74 oz 21 g " Box Pack - No Warranty

MaterialGlass fiber SpecificationThis board uses PAM chip, PAM chip is 10W per channel D-level stereo audio amplifier. This board has over current temperature short circuit protection. FeaturesWork D Class Quiescent Current 20mA Efficiency 90 Rated output power 10W 10 W 8 Frequency response 20Hz to 50KHz Operating voltage DCV Recommended supply voltage 12V, the center PIN of 12VDC is. PCB board size mm ApplicationFor your DIY project OtherIt is NOT acceptable to connect the - outputs of the L R speakers together. Packing List1 x Mini Amplifier Board Dimensions 1.57 in x 1.57 in x 0.71 in 4.0 cm x 4.0 cm x 1.8 cm Weight 0.74 oz 21 g Box Pack - No Warranty

Portable USB night light with soft light, suitable for night sleep and portable lighting. Suitable for USB interface, laptop, charging head, power bank, etc. Mini size, easy to carry, bedroom, desk, going out, etc. 3000K warm light and 6500K white light, suitable for various environments. Energy saving and environmental protection. Suitable for USB interface.

Compact and adorable appearance With the round silicone bottom, easily use it on hand or place on the desktop 3 adjustable wind speeds, choose the optimal one you want Low noise, will not bother you even at night Smooth arc-shaped handle, fit your palm 1500mAh battery, there are different ways to charge the fan: connect the enclosed micro USB charging cable to the desktop/notebook, car charger, power bank, etc. Material: ABS + PC Output Power: 4W Output Voltage: 5V Input Voltage: 5V Input Current: 0.5-1A(max) Battery: Li-ion 18650-3.7V Capacity: 1500mAh Speed: 2.7m/s, 3.7m/s, 4.8m/s Charging time: 4hrs Working time: 2-6hrs CE,RoHS,FCC certificated 1 x BASEUS Handheld Portable Rechargeable USB Cooling Fan with Battery 1 x Micro USB Charge Cable (about 50cm)

The KK2.1.5 is by far the easiest way to get your multirotor in the air! The ONLY true ""PLUG & PLAY"" solution for flight control, this is a full feature flight controller that will operate everything from a Bi-Copter to an Octocopter. The KK2 board offers two basic flight modes; Auto-Level & Full Manual mode. There are no complex Barometers, Compass or GPS devices to complicate things making it possible to install & fly this in a matter of MINUTES!! This is the newest revision, 2.1.5, of the KK2 board with upgraded sensor and a slightly more powerful CPU. We install a modified firmware written by Steveis from RCGroups. CPU: Atmega644 GYRO: MPU ACC: MPU BARO: none MAG: none Mounting Holes: 35x35" Box Pack - No Warranty

The KK2.1.5 is by far the easiest way to get your multirotor in the air The ONLY true PLUG PLAY solution for flight control, this is a full feature flight controller that will operate everything from a Bi-Copter to an Octocopter. The KK2 board offers two basic flight modes Auto-Level Full Manual mode. There are no complex Barometers, Compass or GPS devices to complicate things making it possible to install fly this in a matter of MINUTES This is the newest revision, 2.1.5, of the KK2 board with upgraded sensor and a slightly more powerful CPU. We install a modified firmware written by Steveis from RCGroups. CPU Atmega644 GYRO MPU6050 ACC MPU6050 BARO none MAG none Mounting Holes 35x35

The sensor module is adaptable to ambient light and is not affected by outside light. 2. The board has a multi loop precision adjustable potentiometer, which can be adjusted according to the use environment. The adjustment range is from 3cm-100cm. 3. Because it is a reflection principle, with a reflection of specific objectives, can adjust according to the situation. 4. There is a green LED on the circuit board. When the obstacle is detected, the luminescent OUT output continues to be low, and the barrier free is the continuous high level of the OUT output. Features: 1. Super micro, and design the mechanical installation hole. 2. Less power consumption, wide working voltage range. Use modulation signal transmitting, distance, anti-interference performance is good, can work under outdoor not direct sunlight (distance will be shorter). 3. Range from 3cm to 100cm. 4. The obstacle avoidance using the window technology, avoid the problem of critical region, sensors work is stable, the user directly using the output signal, signal jitter don’t need to consider. 5. The sensor is active infrared reflection detection, so the reflectivity and shape of the target is the key to detect distance. 6. The black detection distance is the smallest, the white is the largest, the small area objects are small distance and the large area distance is large. Specifications: Mechanical rigidity: Flexibility Number of layers: single side Base material: Copper Working voltage: 3.8V-5.5V Working current (5V): typical current is 6mA Obstacle detection time (effective detection range from the non-obstructing target to the presence of an obstacle, or the obstruction to the obstacle course to disappear): Detection range (test environment, room, maximum power, voltage 5v, power consumption 6.5 mA) White walls: approx. 100cm IBM black computer cover: approx. 20cm/7.87” One finger: approx.18cm/7.08” Palm: approx.30cm/11.81” A transparent original bead pen: approx.20cm/7.87” How does it work? The sensor fires infrared light, which is detected by reflected light, and if it detects an obstacle, the OUT foot outputs 0, otherwise 1. Module Interface: 1. VCC external DC3.8V-5.5V power source (can be directly with 5V single chip). 2. GND external DC3.8V-5.5V power supply anode. 3. OUT small digital output interface (0 and 1). Package Content: 1 x Infrared Digital Obstacle Avoidance Sensor Module 1 x M2 Screws Set

eature::. 3.2" TFT LCD Module, resolution, 26 million color.:. Resistive touch screen, with RSM Controller.:. 4 LED light, 2 LED indicator.:. Two GPIO buttons:. A RESET Button:. Serial communication interface:. 2 mini-type USB socket, support for USB OTG, USB OTG transfer cable with professional:. 1 Micro SD card connector (without SD card):. USB OTG function, support for external USB:. A JTAG / SWD debug interface (20pin):. RTC battery:. USB Power Supply:. All IO extend out for second time development:. Mini Board Size: mm LCD Board: mm Important: we have shop in College Road and its is lab. There we sell items and do electronics projects We also have R&D Box Open - Never Used - No Warranty

L293D motor shield, the input voltage DC4.5-25V 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non-repetitive)PER CHANNEL OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES Other types of Arduino modules are also available on our web with delivery to any city in Pakistan. Website http://electronicspanga.com

For sale is: IBM Docking Station and AC-Adapter. (check the pics) IBM ThinkPad Mini-Dock PP IBM 120W AC Adapter, Power Cord, Keys 4 USB Ports for iPods, Flash Drives, etc. The first dock for ThinkPad R Series notebooks. The ThinkPad Mini Dock provides port replication and USB expansion. One-touch and your disconnected from your peripherals including network or modem connections. An integrated key-lock secures your ThinkPad in the Mini Dock and it comes bundled with its own 120W power adapter so you can save your ThinkPad power adapter for travel. When it's time to take your ThinkPad and go, leave everything plugged in. Your 72W AC adapter will not work with the Mini Dock. A genuine IBM 120W AC adapter comes with this auction, and it will power both the Mini Dock and the attached ThinkPad! Features: •ThinkPad Mini-Dock provides easy one-touch ports, network and modem disconnect. •Pass-through (replication) of ThinkPad notebook ports including Gigabit ethernet (RJ-45), including modem (RJ-11), 4-port USB 2.0 hub, DVI, VGA, serial, parallel, PS2-keyboard, PS2-mouse, diskette drive, audio line-in and line-out. •Gigabit Ethernet pass-through port (will function as ethernet port for system without gigabit ethernet). •USB 2.0 pass-through port (will function as USB 1.1 port for system with USB 1.1). •DVI pass-through port (will support resolutions up to x based on attached system). •The included special 120W external power adapter powers both the tp-r-us Mini Dock and the attached system. The ThinkPad Mini-Dock features and benefits include: •Pass-through connection of all ThinkPad ports RJ11 for modem and RJ45 for GB Ethernet/MiniPCI card architecture support from the ThinkPad notebook •Serial, parallel, keyboard, mouse, FDD, monitor, four USB 2.0 integrated hub, line-in, line-out, and digital monitor support/DVI (*) •External 120W AC power supply •System on/off button on Mini-Dock •Volume control via external keyboard and software utility (*) Supports up to SXGA resolution Hardware compatibility: The ThinkPad Mini-Dock is supported on the following IBM systems: Compatible with X, T, Rp/, and Ae/e/ place order by call/sms at - Payment Option & shipping terms: You can pay us by EasyPaisa,or Mobi Cash, we shall ship your order after payment is received in full. Item will be delivered same day or very next day. if you are ordering from lahore then payment on delivery. for my more prodcuts updates please join me on facebook page Techno world Enterprises (round blue n black logo sign in display pic) thx Condition: - No Warranty

The Arduino Pro Mini is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board. The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini. Visit Art of Circuits online store to see more products.

3 x Mini USB LED Light Bulbs Easy to Use: Powered by USB ports using DC 5V power, you can plug- it into any USB power source, such as a mobile power source, laptop, PC, or any other device port with USB output. Cool to the Touch: When the LED lamp is light on, it is also cool to the -touch, which saves energy and will never burn out or need to be replaced. Compact Size: The compact design saves space and keeps the second -socket available. Wide Usage: It is very suitable for bedrooms, children's rooms, -nurseries, bathrooms, kitchens, living rooms, corridors, stairs and any place where lights are needed. Please Note: If you have any questions in the future, please feel -free to email us. We will do our utmost to solve your problems. Light color: warm light/white light Power: 1W Voltage: 5V-0.2A Size: 25x35mm