Ir receiver pin

The TSOP38238 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP38238 is compatible with all common IR remote control data formats. Operating Frequency 38kHz Voltage 2.5V to 5.5V

Description: Details iShopping.pk brings you the best price for Lorex Day/Night IR Outdoor Wireless Bullet Cameras & Wireless Receiver (LWU3622) with 1 year international warranty and express shipping all over Pakistan.     Specification:   Camera Image Sensor 1/3" color CMOS Effective Pixels Horizontal: 1280 Vertical: 720 Resolution 1280 x 720 (720p) Lens 3.6mm fixed, f/2.0 IR LEDs 18 850 nm Night Vision Range Ambient Lighting: 120' / 37 m Total Darkness: 80' / 28 m Compression H.264 Field of View Horizontal: 72° Automatic Gain Control On Power Requirement 12 VDC ±10% Power Consumption With IR: 375 mA (max) Without IR: 160 mA (max) Environmental Rating IP66 Dimensions 2.8 x 8.8 x 2.9" / 7.1 x 22.4 x 7.4 cm Weight 0.6 lb / 0.3 kg Receiver RX Sensitivity -81 dBm Demodulation GFSK Data Rate 4 Mb/s Supported Resolution 1280 x 720 (720p), up to 15 fps Termination USB Power Requirement 5 VDC ±5% Power Consumption 600 mA (max) Operating Temperature 14 to 122°F / -10 to 50°C Dimensions 5.5 x 2.3 x 0.8" / 14.0 x 5.8 x 2.0 cm Weight 0.3 lb / 0.1 kg General TX Frequency Range 2.400 to 2.480 GHz TX Power 16 dBm Unobstructed Effective Range Indoor: 165' / 50 m Outdoor: 500' / 152 m Data Rate 4 Mb/s Modulation GFSK Spread Spectrum FHSS Operating Temperature 14 to 122°F / -10 to 50°C     Product Description:   •  2 Wireless Cameras & Wireless Receiver   •  1/3" Color CMOS Sensor   •  720p Video Resolution   •  3.6mm Fixed Lens with 72° FOV   •  Up to 120' of Night Vision   •  H.264 Comrpession   •  SignalGuard Technology   •  FHSS for Clear Signal   •  Wireless Range of Up to 500'   •  IP66-Rated Cameras and Receiver       Product Overview:   Without video cables, the  2 720p Day/Night IR Outdoor Wireless Bullet Cameras and Wireless Receiver  from  Lorex  is an easy-to-use surveillance system. The package includes two high-definition cameras, a wireless receiver, four antennas, two power adapters, and a mounting kit. Both the cameras and the wireless receiver are weatherproof for outdoor use, providing you with an extended outdoor range. High-gain antennas support frequencies of up to 500' outdoors and 160' indoors for a wide variety of applications. Furthermore, the vandal-resistant polycarbonate housings have cable pass-through mounting brackets to protect your wires.   The included cameras capture images in 720p resolution using 1/3" color CMOS sensors and 3.6mm fixed lenses. IR LEDs provide night vision at distances of up to 135' in ambient lighting and 90' in total darkness. SignalGuard technology will continuously monitor your wireless signal and automatically reconnect the system when a low strength signal is detected. Additionally, FHSS technology reduces conflicts with competing signals for a clear frequency, and H.264 compression delivers smooth, high frame rate video while using a minimum amount of bandwidth.   •  Wireless 720p high-definition video with H.264 compression   •  SignalGuard technology continuously monitors your wireless signal and reconnects when low signal strength is detected   •  Frequency Hopping Spread Spectrum technology reduces conflicts with competing signals   •  IR cut filter achieves accurate color reproduction in varying lighting conditions   •  Long range night vision up to 120' in ambient lighting and 80' in total darkness   •  Simple installation without video cables   •  IP66-rated weatherproof camera and power connectors for outdoor or indoor installation   •  High-gain antennas provide a wireless signal of up to 160' indoors and 500' outdoors   •  Vandal-resistant camera design with cable pass-through mounting brackets   •  Weatherproof receiver can be installed outdoors for maximum frequency range  

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Ceiling Mount Receiver (IR-510R) with express shipping all over Pakistan.   The TOA IR-510R IR Wireless Ceiling Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-510R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 26' (7.92m) radial coverage range (line of sight), and includes ceiling mount brackets.   Features: • Ceiling-Mount brackets included • Equipped with power indicator LED • Covers a practical radius of approximately 26'   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 26' (7.92m) Line of sight Connector 75 ohm BNC Connector Operating Temperature 0 to +40°C (32 to 104°F) Finish Filter Section: Polycarbonate, optical cut filter  Base: ABS resin, Black Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (L x D) 2.81 x 4.72" (71.3 x 120mm) Weight 0.45 lb (205 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Wall Mount Receiver (IR-500R) with express shipping all over Pakistan.   The TOA IR-500R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-500R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 50' (15m) range (line of sight), adjustable pick up angle and easily installs into a standard electrical wall box.   Features: • Wall-mounting brackets included •  Can be installed in an electrical circuit box •  Equipped with power indicator LED •  Reception area is up to approximately 49' line slight •  Infrared light reception angle can be changed   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 50' (15m) Line of sight Angle of Coverage Vertical: 80° (up to 30° movable downward)  Horizontal: 80° up to 30° movable left or right) Connector 75 ohm BNC Connector Operating Temperature 0° C to +40° C (32° F to 104° F) Finish Filter Section: Polycarbonate, optical cut filter  Base: ABS resin, off-white Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (WxHxD) 2.76 x 4.72 x 2.83" (70 x 120 x 72mm) Weight 0.49 lb (220 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Wall & Stand Mount Receiver (IR-520R) with express shipping all over Pakistan.   The TOA IR-520R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-520R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 50' (15m) range (line of sight), and is easily wall or microphone stand mounted.   Features: • Mountable on a wall and on a microphone stand •  Stand-Mount brackets included •  Equipped with power indicator LED •  Reception area is up to approximately 50' line of sight   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 50' (15m) Line of sight Connector 75 ohm BNC Connector Operating Temperature 0 to +40°C (32 to 104°F) Finish Filter Section: Polycarbonate, optical cut filter Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (WxHxD) 3.33 x 2.5 x 1.26" (84.5 x 63.5 x 32mm) Weight 0.22 lb (100 g)

Description: Details iShopping.pk brings you the best price for VDO360 USB 2.0 10x Optical Zoom HD PTZ Camera with express shipping all over Pakistan.   The  VDO360 USB 2.0 HD PTZ Camera with 10x Optical Zoom and Presets  incorporates a 1/2.7" image sensor that records clear videos in resolution of up to 1920 x 1080 (30 fps). This USB 2.0 compatible camera features fast and smooth movement over seven presets on handheld remote or using desktop control. The pan and tilt functionality permits slow movement for fine tuning of camera position or rapid motion when you move a wide range.   Features: • 1/2.7" CMOS Image Sensor • Native 1920 x 1080 Resolution • 10x Optical Zoom Lens • 300° Pan / 180° Tilt • 66.6° to 7.2° Angle of View • Stream Video to Computer via USB 2.0 • Encodes Video in MJPEG at up to 1080p30 • IR Remote with 2 IR Camera Sensors • 7 Presets Can Be Stored on IR Remote • OSX, Windows, and Mobile Compatible   Specifications: Sensor Size 1/2.7" Focal Length 4.9 to 49 mm Optical Zoom 10x Depth of Field 60 cm to ∞ Optical Distortion 1.2% to +0.8% Dynamic Range 65 dB Signal to Noise Ratio 50 dB and above Field of view (FOV) Diagonal: 66.6-7.2°, Horizontal: 53.2-5.3°, Vertical: 39.8-4.2° Tripod Mount Standard Center Tripod mount: 1/4"-20 thread Resolution 640 x 480, 1280 x 720, and 1920 x 1080 all at 30 fps Output USB 2.0 Receiver Dual IR receiver on front Power 9 to 12 VDC input at 1 A Dimensions (W x H x D) 4.62 x 5 x 4.37" (117.5 x 127 x 111.2 mm) Weight 1.2 lb (0.54 kg)   Camera Preset Positioning Fast and smooth movement  Seven presets on handheld remote or using desktop control Dual IR Receivers One in the base and one in the lens assembly for a wide range of control positions  IR controls include a "Video Mute" Accu Pan and Tilt Slow movement when you need it for fine tuning of camera position  Rapid motion when you move a wide range Belt Drive for Smooth Pan and Tilt Quiet motion with no shake Attractive Form Factor Compact in size for discrete placement in the most discerning environments  Metal frame for a modern look

Description: Details iShopping.pk brings you the best price for BenQ 3500 Lumens Ultra Short Throw WXGA DLP Projector (MW855UST) with express shipping all over Pakistan.   Details: Paving the Way for Cutting-Edge Classroom Interaction Interactive education projector MW855UST is designed for classroom collaboration and interaction. Offering spectacular image quality befitting the world’s No. 1 DLP brand, MW855UST also provides simplified installation, lower maintenance, and reduced TCO. With high brightnessand ultra-short throw, MW855UST enhances any learning environment. Unobstructed Instruction Without Space Constraints Offering a big screen in short distance with a 0.35 ultra short-throw ratio, MW855UST eliminates distracting shadows and glare for students and teachers to engage and collaborate freely in front of the board. Uncompromised High Brightness For perfect projection performance, MW855UST produces 3,500 ANSI lumens and WXGA 1280x800 high resolution for clear, sharp images and text even in large, bright classrooms. High brightness allows lights to be kept on during lessons, and the wide-aspect high resolution increases readability for expanded content. Bigger Images BenQ education projectors offer a range of resolutions and projected image sizes to meet diverse classroom needs. Featuring crisp image quality up to 100 inches, our ultra-short throw education projectors deliver increased classroom versatility at reduced costs. Enduring Picture Perfection from DLP Technology With industry-leading high contrast, BenQ education projectors utilize advanced DLP-optimized optical lens systems to provide precise readability and crisp resolution for every single sub-pixel. In addition, DuoBoard has an integrated camera with a noise-reducing and echo-cancelling microphone array for high-quality video conferencing. Users can start meetings with one touch through the BenQ Launcher. Long-Lasting Picture Quality With industrial-grade durability from DLP technology, BenQ education projectors maintain the long-lasting picture perfection by eliminating color decay. Unlike non-DLP projectors, BenQ DLP education projectors look brand-new after lamp replacement. And with over two million micromirrors and minimal heat buildup, the DLP chip endures over 100,000 hours without degradation. Create Interaction on Any Surface PointWrite™ technology works on any flat surface, so no expensive digital whiteboard or additional equipment is necessary. With the PointWrite™ module, images can be projected onto a desk or table for multiple students to easily share and write on the same screen, creating vast new opportunities for classroom interactivity and enabling possibilities for modern digital classroom. Multi-Touch with Pens or Fingers  Multi-Screen Drawing PointWrite™ projectors offer multi-user capability, and two PointWrite™ projectors can be used to double the projection surface. With QWrite Whiteboard Mode, teachers can run different applications or display, view, and annotate across two monitors. Intuitive Setup for Interactivity PointWrite™ auto calibrates and saves its settings the instant it is plugged into a computer’s USB port. PointWrite™ then remains ready with no manual configuration or complicated training for teachers. And MW855UST’s interactive sensor guarantees reliable auto-calibration in any ambient lighting. Windows Gesture Support PointWrite™ projectors support intuitive Windows gestures such as zooming in and out or scrolling while browsing webpages, pictures or Google Maps. All multi-touch commands and gestures are supported for Windows 8 or above and future applications. Simple and Convenient Wireless Dongle To make lessons more engaging and intuitive, MW855UST incorporates the QCast compact dongle that streams documents, images and even Full HD videos from smart devices and computers to the big screen without cables. MHL Support With MHL, teachers and students can share content from Android devices on the big screen, conducting the entire lesson from the smart device without draining its battery. Preventing Dust Entry with Sealed Engine Design MW855UST features a sealed optical engine that fully protects the DLP chip, color wheels, and light path components. It effectively eliminates color wheel sensor failures, visible spots on images, and eliminates color decay to significantly reduce service costs and downtime. Optimizing Educational Investment BenQ Eco Cycle System: Optimized Energy Savings The Eco Cycle System eliminates electricity waste, reduces power-up wait time before and after class, and minimizes maintenance for lower total cost of ownership. LAN Control Compatibility To help IT managers perform day-to-day projector maintenance effectively, MW855UST is widely compatible with leading projector control systems including Crestron, AMX and PJ-Link for network control via LAN, making it simple to integrate into school's network infrastructures. Streamlined Wall Mount Alignment For efficient professional installation, our ultra-short throw projector wall mount features an installation chart and ruler for perfect screen alignment and image position in the classroom. Even simpler, a three-way adjustment knob is located in front of the projector for cleanly installed, absolutely square screens. Lens Shift Lens shift offers the extra flexibility to overcome any minor miscalculations during installation. All you have to do is adjust the switch to shift the projected image up or down by 2%, greatly help you to accommodate specific installations. Corner Fit Correction Corner Fit provides individual adjustment of each corner for perfect fit and alignment onto restricted or uneven spaces. Remote Control Hotkey Press the “Quick Install” hotkey on the remote control to setup the projector. This is a great time saver for managers performing initial projector installation work. Specifications: Projection System‎ DLP‎ Native Resolution‎ WXGA (1280 x 800)‎ Brightness (ANSI Lumens)‎ 3,500 Lumens‎ Contrast Ratio‎ 10,000:1‎ Display Color‎ 1.07 Billion Colors‎ Lens‎ F2.5, f=5.1mm‎ Aspect Ratio‎ Native 16:10 (5 aspect ratio selectable)‎ Throw Ratio‎ 0.35‎ Image Size (Diagonal)‎ 80"~100"‎ Zoom Ratio‎ Fixed‎ Lamp Mode (Normal/Economic)*‎ 3,000/ 4,000/ 6,000/ NA/ NA hours‎ Keystone Adjustment‎ 2D, Vertical/ Horizontal ±15 degrees Corner fit ±5 degrees.‎ Projection Offset**‎ 140%~148% (±5%)‎ Lens Shift‎ 4%‎ Resolution Support‎ VGA (640 x 480) to UXGA (1600 x 1200)‎ Horizontal Frequency‎ 15K~102KHz‎ Vertical Scan Rate‎ 23~120Hz‎ HDTV Compatibility‎ 480i, 480p, 576i, 576p, 720p, 1080i, 1080p‎ Video Compatibility‎ NTSC, PAL, SECAM‎ Interface‎ Computer In (D-sub 15pin) x 2 (Share with component) Monitor Out (D-sub 15pin) x 1 Composite Video In (RCA) x 1 S-Video In (Mini DIN 4pin) x 1 HDMI/ MHL x 2 (HDMI 1 with MHL) Audio In (Mini Jack) x 1 Audio Out (Mini Jack) x 1 Speaker 10W x 2 USB (Type mini B) x 1 (PointWrite interactive module) USB (Type B) x 1 (FW download) USB (Type A) x 1 (5V 2A Power for PT02 Touch module) RJ45 x 1 (LAN Control / LAN Display/ Service)  RS232 (DB-9pin) x 1 IR Receiver x 1 (Front)‎ Dimensions (W x H x D mm)‎ 373.3 x 287.5 x 130.2mm (w/o Mirror) 373.3 x 287.5 x 201mm(w Mirror) ‎ Weight (Without Packing / With Packing)‎ 5kg (w/o wall mount)‎ Audible Noise (Normal/Economic Mode)‎ 34/ 29 dBA ‎ Power Supply‎ AC 100V to 240V, 50Hz to 60Hz‎ Power Consumption‎ Normal 320W, Standby Picture Modes‎ Dynamic/ Presentation/ sRGB/ Cinema/ User 1/ User 2‎ Accessories (Standard)‎ Remote Control w/ Battery: RCS011 Power Cord (by region): 2.9M User Manual CD x 1 Quick Start Guide x 1 Warranty Card (by region) x 1 VGA (D-sub 15pin) Cable x 1 Wall Mount Kit (Installation Guide) x 1 Accessories (Optional)‎ Spare Lamp Kit Wall Mount: WM04G4 3D Glasses: DGD5 Document Camera: S30 PointWrite Kit: PW01U PointWrite Touch Module: PT02

Description: Details iShopping.pk brings you the best price for VideoComm PRO Series 700 TVL Wireless Bullet Camera (ZX-700SR90) with 1 year international warranty and express shipping all over Pakistan.     Specification:   Operating Frequency 5.725 to 5.875 GHz Channels 8, user selectable Radiated Power 50 mv/m @ 10' (3 m) Range & Elevation (Line of Sight) From 300' (91 km) up to 4 miles (6 km); depending on the optional receiver & antenna (available separately) Antenna Type 3 dB omnidirectional rubber duck Antenna Connector SMA (female) Video Format NTSC Camera Type 1/3 Sony 960H CCD sensor Resolution 700 lines Lens Type 2.8-12mm varifocal IR Range 90' (27 m) Minimum Illumination 0.001 lux @ f/1.2 IR Cut Filter Automatic / Mechanical WDR Control Zone configurable backlight compensation SNR >50 dB White Balance Automatic Video Connector BNC (female) Video Impedance 75 Ohms @ 1 Vp-p OSD Adjust exposure, white balance, color, sharpness, motion detection on/off, privacy masking, monitor mode & dead pixel compensation Current Consumption 260 mA @ 12 VDC (IR off) / 600 mA @ 12 VDC (IR on) Power Connector 2.1 mm barrel jack Approvals FCC / IC Operating Temperature -40 to 170°F (-40 to 77°C) Mounting Brackets Integrated 3-axis cast aluminum wall-mount Construction IP66-rated cast aluminum Dimensions 3.3 x 5.5" (8.4 x 13.9 cm) Weight 2.2 lb (0.99 kg)     Product Description:   •  700 TVL Resolution   •  IR LEDs for 90' of Night Vision   •  2.8-12mm Varifocal Lens   •  Mechanical / Automatic IR Cut Filter   •  Wirelessly Transmit Video up to 4 Miles   •  5.725 - 5.875 GHz; 8 Selectable Channels   •  On Screen Display Menu   •  BNC Type Connection   •  Receiver Required for Video Transmission   •  IP66-Rated Housing for Outdoor Use       Product Overview:   Wirelessly transmit your video feed up to 4 miles away using the  PRO Series 700 TVL Outdoor Wireless Bullet Camera  from  VideoComm Technologies. The camera requires an antenna and receiver (available separately) for transmission, and it uses a 5.725 to 5.875 GHz operating frequency on eight user selectable channels for video output transmissions. This setup is suitable for use in applications such as parking lots, harbors, construction sites, and freeways.   The camera features a 1/3" Sony 960H CCD sensor for 700 TVL resolution, and it uses a 2.8-12mm varifocal lens with IR LEDs for up to 90' of night vision. There is an IR cut filter that can function mechanically or automatically, depending on your preference. Zone configurable backlight compensation and automatic white balance features assist in capturing clear images in ambient lighting. Furthermore, an OSD menu allows you to conveniently configure and adjust all of these settings. The wireless camera is placed in an IP66-rated weatherproof cast aluminum housing for outdoor use. In addition, the housing incorporates a sun-shield hood and an anti-glare lens.   Features   •  Supports 5.8 GHz FM-live real-time video transmission for up to 4 miles   •  2.8-12 varifocal lens   •  700 TVL resolution   •  IR LEDs for night vision up to 90'   •  External OSD menu control for convenient setup and picture adjustments   •  Universal 3-axis mounting bracket for easy installation and camera positioning   •  IP66-rated cast aluminum housing with sun-shield hood and anti-glare lens   Applications   •  Harbors   •  Parking Lots   •  Construction Sites   •  Freeways  

Description: Details iShopping.pk brings you the best price for Lorex 4 Channel Eco Series 720p DVR with 1TB HDD and 2 720p Wireless Cameras (LH04141TC2WB) with 1 year international warranty and express shipping all over Pakistan.   Specifications: DVR System Operating System: Linux (embedded) Pentaplex: View, Record, Playback, Backup, & Remote Monitoring Number of Channels: 4 Inputs/Outputs Inputs: None (wireless) Video Out: 1 x HDMI, 1 x VGA USB Port: 2 x USB (1 x front, 1 x back) Video Output Resolution: 1920 x 1080 (HDMI), 1440 x 900, 1280 x 1024, 1280 x 720, 1024 x 768 Display Live Display: 1, 4 Speed: 60 NTSC / 50 PAL System Navigation: USB mouse, IR remote control Sensitivity Levels: 3 Firmware Upgrade: Automatic over the Internet User Authority: By user group Time Synchronization: Auto time sync by NTP server Recording Compression: H.264 Recording Resolution: 1280 x 720 (NTSC & PAL) Quality Control: 3 levels Schedule: By hour, by day, by recording mode, by motion, by channel Pre Recording: 10 seconds (max) Post Recording: 5 minutes (max) Reliability: Watch-Dog, Auto-recovery after power failure Playback Channel: 1 to 4, adjustable Speed: Variable, 16x (max) Players: Backup player Search: By time and event Log Search: Up to 10,000 lines for system, configuration changes, motion/alarm detected, account, record and storage Storage Up to 1 SATA HDD Maximum Capacity: Up to 4 TB Backup Media: USB flash drive & USB external HDD Backup File Format: H.264 file (AVI generator included) Connectivity Cloud Connection: Lorex Stratus Connectivity Supported OS: Windows, Mac OS X Remote OS: Client Software (PC) and Safari (Mac) Email Notification: Text with snapshot Instant Smart Phone: iOS, Android DDNS: Lorex System Configuration: Full setup over network Ports: Programmable by user Network Protocol: TCP / IP / DHCP / UDP / DDNS / PPPoE Network Interface: 10/100-BaseTX, RJ45 Network Speed Control: 48 Kb to 8 MB/s General Power Consumption: 10 W (approximately) Supply Voltage: 100 to 240 VAC, 12 VDC, 2 A, 50/60 Hz Operating Temperature: 32 to 104° F / 0 to 40° C Humidity: 10 to 90% RH Dimensions: 11.8 x 8.7 x 2.0" / 30.0 x 22.1 x 5.1 cm Weight: 2.2 lb / 1.0 kg Camera Image Sensor 1/3" color CMOS Effective Pixels Horizontal: 1280 Vertical: 720 Image Compression H.264 Resolution 1280 x 720 (720p)   Product Description: •  Manage and Record from Up to 4 Cameras •   720p Recording Resolution per Camera •   1TB Included HDD, Expandable Up to 4TB •   Two 3.6mm Fixed Bullet Cameras Included •   72° Horizontal Angle of View •   Up to 120' of Night Vision •   H.264 Video Compression •   HDMI and VGA Video Outputs •   iOS and Android Remote Viewing •   IP66-Rated Cameras and Receiver   Product Overview: Simultaneously monitor and record up to four different areas using the  4-Channel 720p DVR with 1TB HDD and 2 720p Wireless Bullet Cameras  from  Lorex. The system includes one DVR with a 1TB HDD, two wireless outdoor bullet cameras, one wireless receiver, one HDMI cable, one Ethernet cable, four camera antennas, three power adapters, one remote control, one mouse, and a mounting kit. A secure transmission with a wireless range of up to 500' outdoors and 160' indoors allows you to install the cameras in various places throughout your property for a wide range of applications. Each of the included cameras features a 1/3" color CMOS image sensor coupled with 720p resolution for high quality images, and they each use a 3.6mm fixed lens for a 72° field of view. Both cameras contain 18 IR LEDs each for night vision at distances up to 120' in ambient lighting and 80' in total darkness. SignalGuardTechnology continuously monitors the camera's wireless signals and will automatically reconnect to the network when low signal strength is detected. The cameras have IP66-rated weatherproof housings for indoor or outdoor use, and they do not require video cables for an easy and clean installation. The DVR features a recording resolution of 720p for high-definition footage, and the included HDMI cable enables you to easily connect the recorder to an HDTV. The system uses Lorex Stratus Connectivity for a simple 3-step setup, offering a quick and effortless installation. H.264 compression reduces your storage and minimizes your network strain, enabling remote viewing. Android and iOS mobile apps are supported so that you can view and playback recordings from anywhere in the world. You can also receive email alerts with snap shot attachments when motion is detected.   DVR Features •   720p high-definition recording resolution •   Lorex Stratus Connectivity provides an easy 3-step setup •   Includes HDMI cable for simple connection to HDTVs •   Record to included security-grade HDD •   H.264 compression offers reduced file size and network strain for remote viewing •   Three recording modes, including continuous, scheduled, and motion recording •   Pentaplex operation allows for simultaneous view, record, playback, back-up, and remote control •   Dual video outputs (HDMI and VGA) to connect multiple monitors •   Mobile application for live viewing, playback, and video recording •   PC and Mac compatible •   Instant email alerts with snap shot attachments •   Accurate time stamps with NTP & Daylight Savings Time •   Automatic firmware upgrades for an up-do-date system   Wireless System Features •   720p high-definition wireless video with H.264 compression •   SignalGuardTechnology continuously monitors your signal and reconnects when low signal strength is detected •   Frequency Hopping Spread Spectrum technology reduced conflicts with competing signals •   IR cut filter achieves accurate color reproduction in varying lighting conditions •   Long Range night vision up to 120' in ambient lighting and 80' in total darkness •   Simple installation without video cables •   Weatheproof IP66-rated camera and power connectors for outdoor use •   High gain antennas provide a 160' indoor / 500' outdoor wireless signal •   Vandal resistant camera design with cable pass-through mounting brackets •   Weatherproof receiver can be installed outdoors for maximum range

Remote control 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4..Transmission distance:M (Open field, the receiver sensitivity of -100dbm) 5.Transmitting frequency: 315MHZ 6.Modulation mode: ASK (Amplitude Modulation) 7.Encoder types: fixed code With decoding receiver board 1.operating voltage DC5V 2.receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. 3.VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 4.Size: mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package: 1XRemote control 1XWith decoding receiver board Box Open - Never Used - No Warranty

Remote control 1.Operating voltage: DC12V 27A/12V battery x1 2.Operating Current: 10mA at 12V 3.Radiated power: 10mw at 12V 4..Transmission distance:M Open field, the receiver sensitivity of -100dbm 5.Transmitting frequency: 315MHZ 6.Modulation mode: ASK Amplitude Modulation keeing 7.Encoder types: fixed code With decoding receiver board 1.operating voltage DC5V 2.receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. 3.VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 4.Size: 6.6x22x41mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package: 1XRemote control 1XWith decoding receiver board" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Remote control 1.Operating voltage: DC12V 27A/12V battery x1 2.Operating Current: 10mA at 12V 3.Radiated power: 10mw at 12V 4..Transmission distance:M Open field, the receiver sensitivity of -100dbm 5.Transmitting frequency: 315MHZ 6.Modulation mode: ASK Amplitude Modulation keeing 7.Encoder types: fixed code With decoding receiver board 1.operating voltage DC5V 2.receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. 3.VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 4.Size: 6.6x22x41mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package: 1XRemote control 1XWith decoding receiver board" Facebook page;ElectronicsArena.com

Remote control 1.Operating voltage: DC12V 27A/12V battery x1 2.Operating Current: 10mA at 12V 3.Radiated power: 10mw at 12V 4..Transmission distance:M Open field, the receiver sensitivity of -100dbm 5.Transmitting frequency: 315MHZ 6.Modulation mode: ASK Amplitude Modulation keeing 7.Encoder types: fixed code With decoding receiver board 1.operating voltage DC5V 2.receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. 3.VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 4.Size: 6.6x22x41mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package: 1XRemote control 1XWith decoding receiver board" Box Pack - No Warranty

Remote control 1.Operating voltage: DC12V 27A/12V battery x1 2.Operating Current: 10mA at 12V 3.Radiated power: 10mw at 12V 4..Transmission distance:M Open field, the receiver sensitivity of -100dbm 5.Transmitting frequency: 315MHZ 6.Modulation mode: ASK Amplitude Modulation keeing 7.Encoder types: fixed code With decoding receiver board 1.operating voltage DC5V 2.receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. 3.VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 4.Size: 6.6x22x41mm Note: There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package: 1XRemote control 1XWith decoding receiver board"

remote control 1.operating voltage: dc12v 27a 12v battery x1 2.operating current: 10ma 12v 3.radiated power: 10mw 12v 4..transmission distance:m open field, the receiver sensitivity of 100dbm 5.transmitting frequency: 315mhz 6.modulation mode: ask amplitude modulation 7.encoder types: fixed code with decoding receiver board 1.operating voltage dc5v 2.receiver sensitivity is 98db. leg 7 bits, respectively, vt, d3, d2, d1, d0, the plus 5 v and gnd. 3.vt is a valid signal high output pin upon receiving a valid signal, the pin output high, may also drive the relay. 4.size: 6.6x22x41mm note: there are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin d0, d1, d2, and d3 of. press the buttons transmit signals, the corresponding data bit is output high. package: 1xremote control 1xwith decoding receiver board

remote control 1.operating voltage: dc12v 27a 12v battery x1 2.operating current: 10ma 12v 3.radiated power: 10mw 12v 4..transmission distance:m open field, the receiver sensitivity of 100dbm 5.transmitting frequency: 315mhz 6.modulation mode: ask amplitude modulation 7.encoder types: fixed code with decoding receiver board 1.operating voltage dc5v 2.receiver sensitivity is 98db. leg 7 bits, respectively, vt, d3, d2, d1, d0, the plus 5 v and gnd. 3.vt is a valid signal high output pin upon receiving a valid signal, the pin output high, may also drive the relay. 4.size: 6.6x22x41mm note: there are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin d0, d1, d2, and d3 of. press the buttons transmit signals, the corresponding data bit is output high. package: 1xremote control 1xwith decoding receiver board" Box Pack - No Warranty