Hall effect

product description acs758 lcb 050b: plus minus 50a ac or dc current sensing. hall effect based linear current sensor ic,the conductive path are electrically isolated from the signal leads. this allows the acs758 to be used in applications requiring electrical isolation without the use of opto isolators or other costly isolation techniques.typical applications include motor control, load detection and management, switch mode power supplies, and overcurrent fault protection." Box Pack - No Warranty

BOB-08882 SparkFun Description: This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions. The ACS712 outputs an analog voltage output signal that varies linearly with sensed current. The device requires 5VDC for VCC and a couple of filter capacitors. Please keep in mind that though the ACS712 is rated for 2.1kV isolation, the PCB it is on is not designed for that type of voltage. Please keep that in mind if you are using this breakout in high voltage applications. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

Product Description ACS758-LCB-050B: ±50A AC or DC current sensing. Hall Effect-Based Linear Current Sensor IC,the conductive path are electrically isolated from the signal leads. This allows the ACS758 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Product Description ACS758-LCB-050B: ±50A AC or DC current sensing. Hall Effect-Based Linear Current Sensor IC,the conductive path are electrically isolated from the signal leads. This allows the ACS758 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection." Facebook page;ElectronicsArena.com

Product Description A3144E Hall sensor element 44E OH44E principle of Hall effect switch IC, the use of magnetic semiconductor integrated circuit manufacturing technology, which is determined by the voltage regulator, Hall-voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit and open-collector output stage consisting of magnetic sensing circuit, Works with input magnetic induction and the output is a digital voltage signal. Product Features small size, high sensitivity, fast response and good temperature performance, high accuracy, high reliability. Typical Applications Non-contact switch, auto ignition, brake circuit, position, speed detection and control, security alarm devices, textiles control systems etc.

Product Description A3144E Hall sensor element 44E OH44E principle of Hall effect switch IC, the use of magnetic semiconductor integrated circuit manufacturing technology, which is determined by the voltage regulator, Hall-voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit and open-collector output stage consisting of magnetic sensing circuit, Works with input magnetic induction and the output is a digital voltage signal. Product Features small size, high sensitivity, fast response and good temperature performance, high accuracy, high reliability. Typical Applications Non-contact switch, auto ignition, brake circuit, position, speed detection and control, security alarm devices, textiles control sy...

Features 3.5V to 24V DC operation voltage Low current consumption Temperature compensation Wide operating voltage range Open-Collector pre-driver 50mA maximum sinking output current Reverse polarity protection Lead Free Package TO-92 Box Pack - No Warranty

The lowest rated working voltage: DC4.5 5V-24V. Maximum operating current: 15 mA (DC 5V). Working voltage range: DC 5~18 v. Load capacity:, Work temperature: Work humidity range: 35%~90%RH (no frost) Allowing pressure: pressure 1.75Mpa Storage temperature: -25~+80’C Save humidity: 25%~95%RH Flow Range:1-30L / min Delivery charges RS:200 on all over pakistan

Condition: New Analogue reading value Price is per piece. Other types of sensors are also available on our website with delivery to any city in Pakistan. Website http://electronicspanga.com

description: if you re looking for a base for your next robot, look no further than the rover 5. the rover 5 uses 4 independent motors, each with a hall effect quadrature encoder and gearbox. the entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. you can even replace the tank treads with traditional wheels. this isn t a wimpy or flimsy robot base. weighing in at over 2.5 pounds without batteries, this base is heavy duty and can drive over quite a bit. features: adjustable gear box angles 4 independent dc motors 4 independent hall effect encoders thick rubber tank treads 6x aa battery holder 10kg cm stall torque per motor" Box Pack - No Warranty

BOB- SparkFun Description: This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions. The ACS712 outputs an analog voltage output signal that varies linearly with sensed current. The device requires 5VDC for VCC and a couple of filter capacitors. Please keep in mind that though the ACS712 is rated for 2.1kV isolation, the PCB it is on is not designed for that type of voltage. Please keep that in mind if you are using this breakout in high voltage applications. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile: www.matrixelectronic.com Email: Email: Box Pack - No Warranty

Voltage Input 12 VDC 24 VDC Current Draw 12V 500mA 24V 250mA 5 Holding Force Up to lbs 545 kg Hall Effect Contact SPDT rated 2A at 24 VDC Operating Temperature 055 C F Operating Humidity 095 non condensing Weight Magnet 2.5 kg 1 Dimensions Magnet L266xW67xT39 mm Armature L185xW61xT16.5 mm

Features & Compatibility Atmosphere Light Sunset Lamp is creative and simple design floor lamp brighten your Surroundings with pretty color, enhance the family atmosphere. Any photographer or videographer can create truly unique photos and video with this Special Projector Lamp Amazing for Photography: This piece is specifically designed to achieve a amazing projection of colors and shades. brings new metaphysical galaxies of colors. It projects a stunning and colorful circle, creating a unique atmosphere in every space. allowing the viewer to immerse oneself. Atmosphere Light Sunset Lamp Features: Lights to illuminate homes and hearts Featuring Sunset and Rainbow projection effect, dreamlike visual experience. The light projects a striking colored circular light on the walls, ceiling and floor, Suitable for home, hall, living room, bedroom, dining room, etc. Great Installation Effect: Tips: The thread insert can be rotate through pipe. Specifications: Product Dimensions: 39cm Weight: 0.9lb Color: rainbow,sunset Package included:1* Sunset Lamp & Remote Controller Package case come with pearl cotton which prevent shock and knock lamp in transit Notice: the lamp is too dim for reading