Gps module

Product Description GPS APM2.5 NEO-6M Module With EEPROM To Save Data With Active Antenna The GPS module, 3V-5V power supply universal Ublox NEO-6M module with ceramic margin with antenna, signal strength With data backup battery With power failure data storage EEPROM The size of the antenna mm Box Pack - No Warranty

Description GPS modules NEO-7M, 3V-5V power supply GM, Using imported u-blox NEO-7M-0-000 GPS module Module with ceramic destined antenna, signal super EEPROM power down to save the configuration parameter data With data backup battery There are LED lights High quality Immersion Gold PCB Antenna size 25 25mm Module Size 25mm 35mm Installation diameter 3mm Weight 19g Supply voltage 3v-5v The default baud rate 9600 Package Included 1 X Ublox NEO-7M-000 GPS Module

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com SKM53 Gps module Description: Ultra high sensitivity: -165dBm 22 tracking/66 acquisition-channel receiver WAAS/EGNOS/MSAS/GAGAN support NMEA protocols (default speed: 9600bps) Internal back-up battery and 1PPS output One serial port and USB port (option) Embedded patch antenna 18.2 x 18.2 x 4.0 mm Operating temperature range: -40 to 85 RoHS compliant (Lead-free) Tiny form factor 30mm x20mm x 11.4mm

High integrated, small size GPS module with built-in antenna, NMEA output, TTL level serial interface, connect to any MPU easily. high sensitivity is achieved by utilizing SiRF III chip. PPS LED is light after power on, became flash after located. Performance Tracking sensitivity-159dBm Acquisition sensitivity-153dBm Cold start time 42s average Warm start time 38s average Hot start time 1s average. Recapture time 0.1s average 2D plane 5m average Tracking channel 20 Operating temperature-30c to 80 c Box Pack - No Warranty

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com Neo 6M GPS Module Features u-blox NEO-6M onboard, with high-gain active antenna IPX interface, for connecting different active antennas Chargeable backup battery, keeps the ephemeris data when power down, supports hot starts Onboard EEPROM for storing config information Specifications TTL level, compatible with 3.3V/5V systems Default baud rate 9600, configurable via u-center

Plz CONTACT ME, MEET ME PERSONALLY. I am confident that you will not find price lower than this anywhere in Pakistan, for this ultra modern Quadcopter. It has camera stand, (this item do not include camera), but has frame to mount camera. Ideal for areal photography and video making. (it is on par with dji phantom). Spare parts like propellers, landing gears, frame cover etc... will be available. Description: Product Name: CX-20 Auto-Path Finder Size: (CM) Battery: Li-po battery Mah Flight Time: Approx 15 Minutes Radio Control Distance: 300meters Built in 5.8G Antenna GPS One Key Auto Pilot Return To Home and Land GPS Lost Signal Auto Pilot Return To Home and Land GPS One Key Altitude Height Position Hold IOC Head Lock Function Low Voltage Protection ATTRACTIVE AND HIGHLY INTEGRATED DESIGN A compact and highly integrated design means that it is easier for you to pack it into your backpack. The streamlined design brilliantly reflects the aesthetics of its futuristic design and the fantastic visual effects allows you to become the focus of the crowd. Moreover, you can mount a Go Pro or other light and handy cameras on your Auto-Path finder to shoot some footage from the air which will bring you a brand new flying experience. READY TO FLY DESIGN The hardware mounting and software tuning are all done prior to delivery. The Auto-Path finder is ready to fly the moment you unpack it, you just need to attach propellers, charge the Li-Po and install the transmitter batteries before use. REMOTE CONTROL UNIT Auto-Path finder contains a remote controller and receiver, which help the user to completely avoid the inconvenience of purchasing such things. The only thing you need to do is to add TX batteries (4x AA). The 2.4 G ISM frequency makes the effective control distance up to 1.5km. The frequency hopping anti-interference design allows multiple remote controllers to work at the same time, and provides a reliable remote communications link. STABLE, YET AGILE PERFORMANCE, EASY TO FLY Auto-Path finder has an integrated flight dynamics system, the MX + GPS multi-rotor autopilot system, as well as the dedicated remote controller and receiver. Flight parameters and functions have been set up before delivery, so you can fly your Auto-Path finder the moment you receive it. The proven stability of the MX autopilot system allows you to easily achieve great flight performance. TWO FLIGHT CONTROL MODES, INCLUDING POSITION HOLD With the built-in MX autopilot system plus a GPS module, the Auto-Pathfinder has GPS Attitude and Attitude Control Mode. Pilots can switch between the two modes to achieve a particular flight experience. INTELLIGENT ORIENTATION CONTROL (IOC) Auto-Path finder also has the Intelligent Orientation Control (IOC) function of the MX autopilot system. Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor FAIL SAFE & AUTO GO HOME/LANDING Auto-Path finder also has the fail safe function of the MX autopilot system. This means when the communication between the Mx Controller and the transmitter is disconnected, the out puts of all command sticks from controller will go to the centre position, the GPS system will automatically trigger Return To Home and will land safely.

As the title suggests, I am selling a BackView mirror which has a built in screen on left with Android! (touch screen) Backview mirror + LCD + Android + Front Camera with IR built in! + Waterproof back camera (for reverse) Includes GPS Navigaton (with GPS Module), Touch Screen Android 4.3+, Car Charger, USB Cable etc Amazing! PKR 16,000/- (without installation) Location: Karachi (can be shipped on buyers risk/expense) For more pics n details u can chck (n pls like) my FaceBook page by name of Gadgtecs

All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilotautomatic control. DJI Naza-M Lite Features All-in-One Design Advanced attitude stabilize Algorithm Multiple flight control modeintelligent switching GPS Module AvailableAccurate Position hold Intelligent Orientation Control IOC Failsafe mode Low voltage protection Motor Arm and Motor Dis-arm Support Futaba S-Bus and PPM receiver Supported multi-rotor types Built-In Gimbal Stabilization Function Remote Adjustment

All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilotautomatic control. DJI Naza-M Lite Features All-in-One Design Advanced attitude stabilize Algorithm Multiple flight control modeintelligent switching GPS Module AvailableAccurate Position hold Intelligent Orientation Control I...

Product Description Description HC-06 wireless Bluetooth serial pass through transceiver module can be used for replacing RS232 cable between a microcontroller and PC. The module also can be used for connecting the Cell Phones with Bluetooth Peripheral to Embedded Boards or Machines using standard Bluetooth SPP Profile. Usage Default serial port setting: , N, 8, 1 Pairing code: Running in slave role: Pair with BT dongle and master module Applications Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices GPS receiver Industrial control MCU projects Pinout KEY: according to the data sheet, pull-up this pin while power-on-reset of the module to enforce AT mode. VCC is indicated in the range of 3.6V-6V. GND: Ground TXD: serial output of the module, to be connected to RX of the microcontroller. Note that this signal is using 3.3V logic level RXD: serial input of the module, to be connected to the TX of the microcontroller. Note that this signal is using 3.3V logic levels. STATE: connected to LED2 (Pin32) of the module, Related Information: Supported Android Apps The HC-06 although supports several android applications but following is a list of applications that were tested to work with this module: microController Arduino Bluetooth Please visit our website for more details.

S10 GNSS Receiver The New Generation GNSS Receiver Stonex S10, the most advanced integrated GNSS Receiver ever appeared on the geomatic scene, leads to a new generation of smart and open GPS, where the User has the ability to install customized applications directly on the receiver. The advanced features of Stonesx S10, such as automatic leveling with electronic bubble, make surveying much faster and accurate. The sophisticated internal structure design guarantees a compact housing: GNSS antenna, GPS board, power board, RX/TX radio, smart battery, 3.5G module, BT module and Wi-Fi module all take place in a well organized space, optimizing performances and power consumption. Stonex S10 is based on CORTEX-A8 platform with on board LINUX smart system combined with an excellent networking system. With the provision of a special SDK package it is possible to develop and install special applications that run inside S10 ecosystem, enabling an unlimited range of advanced applications.

BMP280 Replacement/Alternative to BMP180 and BMP085 Temperature Barometric Pressure Sensor Module For Arduino  with 3.3V Load Digital Module Features: Enhancement of GPS navigation e.g.time-to-first-fix improvement, dead-reckoning, slope detection Indoor navigation (floor detection,elevator detection) Outdoor navigation,leisure and sports applications Weather forecast Health care application(e.g. sirometry) Vertical velocity indication(e.g. risk/sink speed) Target devices Handsets such as mobile phones, table PCs, GPS devices Navigation systems Portable health care devices Home weather stations Flying toys Watches PCB size:(L*W)1.52* 1.20cm/0.60"*0.47" Website http://electronicspanga.com

The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints with Mission Planner software which is an open source software. It is used in DIY drones for Final year projects to convert an rc quadcopter to autonomous. Features: Arduino Compatible! -Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally -Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer -Onboard 4 MegaByte Dataflash chip for automatic datalogging Optional off-board GPS, uBlox LEA-6M module with Compass. -One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. -Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively. Package include: - APM 2.6 main board - Plastic case for APM - Ublox LEA-6M GPS built-in compass - GPS Case - GPS Bracket

Get the targets latitude and longitude by SMS or GPRS, and check position on google earth/maps. Support GPRS data transmission. Support sending commands by computer Remote sending commands by GPRS server and SMS Support GSM Sim cards, the unit works with the other card automatically when one card has no GSM signal or no phone charge. Support storing data in SD card, the GPS data will be stored into the SD card automatically when there no GPRS signal. Remote Monitoring and SOS function, and Two-way communication. Send a Geofence alert to the user when it breaches the restricted area. Send SMS to the unit to cut off the vehicle engine and circuit when someone startup the vehicle illegally in anywhere and anytime. monitor fuel without sensor(OPTIONAL) Specifications: Size :80(L)x60(W)x25(H) mm Weight :100g Network GSM/GPRS Band : : 850/900/1800/1900Mhz GSM module SIMCOM GPS chipset SirF III chipset GPS sensitivity -159dBm GPS accuracy 5m Cold/ Hot T TFF 35/2s Car charger : 12-24V input, 5V ouput Battery Power 3.7V DC Li-Ion Battery,1100mA Battery Life : About 48hours Operating Temperature -10°C to +65°C Storage Temperature -20°C to +70°C More Info : https://www.letstrak.com/device.html

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6~​​6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. Box Open - Never Used - No Warranty

Features: - TF Card Reader and Writer Module for Arduino, adopts easy plug SPI connector - The module can program the corresponding program to achieve the Sensors & IMU (temperature and humidity sensor, light sensor, GPS etc.) data record and other functions via the Dupont Line, Arduino main control board or other singlechip connection. The data can be analyzed and used via TF card reader to read the TF card data - Module with 2 LEDs indicator IF card status Specification: - Working voltage: 3~5V; - Communication mode: SPI; - TF card holder is automatic pop-out - Size: mm Pin configuration: - CD: card insert detection - CS: card selection - MOSI: SPI data input port - MISO: SPI data output port - SCK: SPI clock Box Pack - No Warranty

Features: TF Card Reader and Writer Module for Arduino, adopts easy plug SPI connector The module can program the corresponding program to achieve the Sensors & IMU temperature and humidity sensor, light sensor, GPS etc. data record and other functions via the Dupont Line, Arduino main control board or other singlechip connection. The data can be analyzed and used via TF card reader to read the TF card data Module with 2 LEDs indicator IF card status Specification: Working voltage: 3 to 5V; Communication mode: SPI; TF card holder is automatic pop-out Size: 25x35mm Pin configuration: CD: card insert detection CS: card selection MOSI: SPI data input port MISO: SPI data output port SCK: SPI clock" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features: TF Card Reader and Writer Module for Arduino, adopts easy plug SPI connector The module can program the corresponding program to achieve the Sensors & IMU temperature and humidity sensor, light sensor, GPS etc. data record and other functions via the Dupont Line, Arduino main control board or other singlechip connection. The data can be analyzed and used via TF card reader to read the TF card data Module with 2 LEDs indicator IF card status Specification: Working voltage: 3 to 5V; Communication mode: SPI; TF card holder is automatic pop-out Size: 25x35mm Pin configuration: CD: card insert detection CS: card selection MOSI: SPI data input port MISO: SPI data output port SCK: SPI clock" Facebook page;ElectronicsArena.com

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com

Features: TF Card Reader and Writer Module for Arduino, adopts easy plug SPI connector The module can program the corresponding program to achieve the Sensors & IMU temperature and humidity sensor, light sensor, GPS etc. data record and other functions via the Dupont Line, Arduino main control board or other singlechip connection. The data can be analyzed and used via TF card reader to read the TF card data Module with 2 LEDs indicator IF card status Specification: Working voltage: 3 to 5V; Communication mode: SPI; TF card holder is automatic pop-out Size: 25x35mm Pin configuration: CD: card insert detection CS: card selection MOSI: SPI data input port MISO: SPI data output port SCK: SPI clock" Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. "

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3 3V LDO, input voltage: 3 6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3 3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc " Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage: 3.6 6v, unpaired current: about 30 ma, paired: about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance: 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just search and key passcode. running in slave role: pair with bt dongle and master module,simply establish connection between device with bluetooth function gps, pc,pda,psp phone,industrial control,etc. " Box Pack - No Warranty

features: tf card reader and writer module for arduino, adopts easy plug spi connector the module can program the corresponding program to achieve the sensors and imu temperature and humidity sensor, light sensor, gps etc. data record and other functions via the dupont line, arduino main control board or other singlechip connection. the data can be analyzed and used via tf card reader to read the tf card data module with 2 leds indicator if card status specification: working voltage: 3 5v communication mode: spi tf card holder is automatic pop out size: 25x35mm pin configuration: cd: card insert detection cs: card selection mosi: spi data input port miso: spi data output port sck: spi clock" Box Pack - No Warranty

Features - TF Card Reader and Writer Module for Arduino, adopts easy plug SPI connector - The module can program the corresponding program to achieve the Sensors IMU temperature and humidity sensor, light sensor, GPS etc. data record and other functions via the Dupont Line, Arduino main control board or other singlechip connection. The data can be analyzed and used via TF card reader to read the TF card data - Module with 2 LEDs indicator IF card status Specification - Working voltage 35V - Communication mode SPI - TF card holder is automatic pop-out - Size mm Pin configuration - CD card insert detection - CS card selection - MOSI SPI data input port - MISO SPI data output port - SCK SPI clock Box Pack - No Warranty

Free Cash On Delivery in all cities Of Pakistan Specification： Item Type: Children Smart Watch Material: Plastic Touch Screen: No Screen Size: 0.96in Suitable For: Kids Memory: 128kb Have Camera: No Have Microphone: Yes Wearing Mode: Wrist Wearing Communication Function: Support Compatible OS: Android/IOS Operating Mode: Button GSM Frequency Band: 850/900/1800/1900MHz GPRS: Class 12, TCP/IP Build In GSM Module GPS Sensitivity: -159dbm GPS Locating Accuracy: 10m(2D RM) GSM Locating Accuracy: 50-200m Speed Accuracy: 0.1m/s Battery: 3.7V 400mA Standby Time: 2-3days Size(Watch Case): 45*32*13mm/1.8*1.3*0.5in(L*W*H) Weight: 35.2g Color: Green, Blue, Pink Notes: App system required android (os 3.0 or above), ios phone (ios 6.0 or above) The App's language support English, Chinese, Portuguese, Spanish, German, Turkish, Vietnamese, Russian, French, Indonesian, Malay, Dutch, Danish, Polish etc. Package Included: 1Children Smart Watch 1Charging Cable 1 Manual

Features: MediaTek MT solution 5Hz output bps TTL serial interface 3.3V with 41mA 66 Channel GPS Fast TTFF at low signal level Up to 10Hz update rate Capable of SBAS WAAS, EGNOS, MSAS Built-in micro battery to preserve system data for rapid satellite acquisition LED indicator for fix or no fix" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features: MediaTek MT solution 5Hz output bps TTL serial interface 3.3V with 41mA 66 Channel GPS Fast TTFF at low signal level Up to 10Hz update rate Capable of SBAS WAAS, EGNOS, MSAS Built-in micro battery to preserve system data for rapid satellite acquisition LED indicator for fix or no fix" Facebook page;ElectronicsArena.com

Features: MediaTek MT solution 5Hz output bps TTL serial interface 3.3V with 41mA 66 Channel GPS Fast TTFF at low signal level Up to 10Hz update rate Capable of SBAS WAAS, EGNOS, MSAS Built-in micro battery to preserve system data for rapid satellite acquisition LED indicator for fix or no fix"