Generator dual fuel

Aoa wana sale my duel fuel generator 5kva in excellent condition.self start button with ags battery. Working fine both o gas n petrol 227 runing hrs. Installed with automatic switch to run automatically n shut down in load shrdding. Condition: - No Warranty

Aoa! I want to sale my duel fuel generator 5kva in excellent condition.self start button with ags battery. Working fine both o gas n petrol 227 running hrs. Installed with automatic switch to run automatically n shut down in load shedding.new generator price is this is only slightly used in excellent condition can chek with mechanic no issues at all Condition: - No Warranty

Features: 1.One hand use. 2.Genuine condition. 3.Rope start system. 4.Low noise. 5.Duel fuel i.e GAS and Petrol both. Load: IT can run 5 fans + 5 tube lights or 8 savers + 1TV. Or 3 fans + 3 savers + 1 fridge. Engine with genuine parts. Repaired only head with genuine parts of standard quality.Now it is working perfectly with gas and petrol both. Reason for selling: I want to sale because i bought Ups and loadsheding is less in my area only 1 hour i.e cover able easily with my Ups. contact timings: 1pm to 10pm for mobile phone.

FG-AGS GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service. Box Pack- Warranty: 1 Year

FG-AGS GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service.

  FG-AGS 1000 GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service.

20 KVA & 30 KVA ENGINE - TOYOTA UK STAMFORD RPM 3 PHASE OPEN & CANOPY 6 months Warranty RPM 3 PHASE

20 KVA & 30 KVA ENGINE - TOYOTA (3S) PETROL & GAS UK STAMFORD RPM 3 PHASE OPEN & CANOPY 6 months Warranty RPM 3 PHASE

Generator is in total Genuine condition,only 50hrs used.. looks like a new one.. This generator easily run a load of 40 amps on natural gas fuel Futher detail:- Continuouly runs a load of:- 3 split units of 1.5 ton 4 fans 2 televisions Brand Name:-Generac Guardian(U.S.A) Canopi:-weather proof(AMERICAN STANDARD) Phase:single phase(220v) Fuel type:-Natural Gas,lpg Waranty:-6 months service waranty If u want some further detail feel free to call me.. This is the last piece s price is little negotiable.. thanks.

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis