Generator control system

FG-AGS GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service. Box Pack- Warranty: 1 Year

FG-AGS GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service.

  FG-AGS 1000 GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service.

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis Box Pack- Warranty: 1 Year

Manufacturer: Ebox Systems It supports MPU Sensor. It will display reading on lcd: 3 phase voltages genset/wapda, 3 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It is ats without any display, it is designed for small home generators. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Manufacturer: Ebox Systems It will display reading on lcd: 1 phase voltages genset/wapda, 1 phase current, Battery volts, Engine temperature, Winding temp, Oil pressure in bars, Engine run hours. It has alarms of winding temp,engine temp,over/under volts/current, low battery volts, start fail. Features: Specially designed graphical user interface. Digital display. Display all the parameters related to generator and main’s supply. Microprocessor based efficient design. Automatically ignite the engine. Automatically stops the engine It can read multiple analogue inputs from sensor. Configurable timers, auxiliary inputs, digital inputs, digital outputs. Emergency stop function Engine history event log. Engine warm up mode. Engine monitoring through sensors. Front panel mounting. Front panel programming. Generator operating status warning. LCD alarm indicator. Manual start. Pc programmable. Password protected programming. RS232 and RS485 remote connection. Advantages ·Full integration into new & existing genset systems PC software for configuration and monitoring Remote module control and monitoring using KEMSYS PC software Module improves the life cycle of engine and attached accessories On-site and remote module configuration (Optional on demand) RPM Sensing Through MPU Sensor. Ethernet module for remotely command and control (Optional on demand) Fuel monitoring and temper protection (Optional on demand) User-friendly set-up and button layout Product Specifications ·DC Supply: 8 V to 30 V continuous. Cranking Dropouts: Able to survive 0V for 70mS, providing the supply was at least 10V before dropout and supply recovers to 7V. Auxiliary Outputs a DC at supply voltage. Maximum Operating Current: Standby Current: 350mA at 12V. Module Dimensions(Lxw) And H: 176mm x 138mm and 40mm (7”x5.4” and 1.5”) Panel Cut-Out (Lxw): H: 158mm x 118mm (6.2” x 4.7”). Maximum Panel Thickness: 8mm. Discount will be provided on quantity basis

Promote Your UPS & Generator,Solar System Business With SMS Marketing In UPS & Generator Solar System Companies All Pakistan. Lahore, Karachi, Islamabad, Gujarat, Gujranwala, Sialkot. Multan, Faisalabad. & All Pakistan Any City Any Area. To Much Discount Rates. Very Cheap Rates. Contact Details: Whats App / Viber - Web Site: www.MarketingPk.Com Email: Skype ID: (MarketingPK) Box Pack- Warranty: 1 Year

Advanced Software Based access control systems go beyond the conventional security tools that businesses use to provide access to authorized persons. Access control systems can deliver highly detailed audit trail reporting which can come extremely handy in knowing the presence of individuals at specific times within the business premises. Access control system can be customized to protect employees, valuable data, equipment and property from unauthorized individuals. for more information please feel free just contact us With Complete Installation Indoor Outdoor Fingerprint Reader System

Biometric[Attendance] Control System with Software only Rs. VWC has successfully installed Biometric Systems across all industries and all types of environments. These include Industrial Factories + Offices, Retail Outlets, Supermarkets, Office Blocks, Shopping Centers, etc. All the surveillance systems installed & maintained by VIRTUAL WORLD COMMUNICATIONS are Digital. We also provide: • Access Control (TMACC) • Onsite Maintenance Contracts • Analogue CCTV Upgrades to Digital • Project Management and Consultancy • Site Surveys with Total Security Analysis • Rental Schemes on all Digital Equipment • Supply, Installation & Commissioning of Embedded and PC-Based Digital Video Recorders" Contact: Virtual World Communications Office # 14, Mezzanine Floor, Wind Song Place, Block 7/8, K.C.H.S.U, Shahrah-e-Faisal, Karachi - Pakistan Tel: 021-/ Mob: - Skype: vwcpakistan Email: vwcpakistan(a)gmail. Com Web: www.virtualworldcommunications. com" Box Pack- Warranty: 1 Year

100% Brand new in original box packing Brand new and high quality Traditional apperance with useful function Professional design Great for home and office high security Come with user manual Operating voltage: DC 12V Memory: 500 standard users Card reading distance: 0 - 15 meters Support EM card Ambient humidity: 40 to 90 % RH 3 options to open your door (admin user selectable): Card (Key Tag) & Password / Card (Key Tag) Only / Password Only ++Package included++ 1 X RFID Access control system 10 X Keyfobs 1 X English user manual

We deals in biometric time attendance and door access control system with complete hr time attendance management software free installaion 1 year replacement warranty sales services and maintanance

assalam o alaikum we deals in all types access control system 1 access lock device 1 lock electric 1 power supply 10 rfid card 1 year warrianty