Display module max

Module parameters: 1.A single module can drive an 8 * 8 common cathode lattice 2.Module Operating voltage: 5V. 3.Module size: 5 cm long X 3.2 cm wide X 1.5 cm high 4.With four screws hole, aperture 3mm, by using our M3 Tongzhu fixed 5.Module with input and output interfaces, supports multiple modules cascade

Product Description This is MAX Based Serial 8-Digit 7 Segment LED Display Module. Also Called LED Tube Display. It has an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 digit 7-segment digital LED display. A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX also allows the user to select each data encoding or no coding. The display also has a 150µA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data. Technical Specifications No of Digits: 8 Power: 5V. Color: Green Interface Type: SPI, QSPI, MICROWIRE Serial Interface Maximum Clock: 10MHz Digit LED Color: Bright RED Cascading Ability: Can be chained or cascaded to drive unlimited units Display Driver: MAX Material: PCB + Electronic Components Size: mm

0.96? Blue 128X64 OLED LCD LED Display Module For Arduino IIC I2C Communicate DC 3V-5V SPI Serial Module Specifications: High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size: 27.0MM * 27.0MM * 4.1MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306 Views: 5

This is a Shield that plugs directly on Arduino for lots of functionality with no additional wiring. It has a Parallel LCD display that works with the standard Arduino LCD Library (with correct pin definitions). It has 5 pushbuttons that use only one Analog pin, with a supplied library to return button presses.

2.4 inch LCD TFT display Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control Colorful, 18-bit different shades 4-wire resistive touchscreen 240 x 320 resolution

Product Description The matrix kit uses MAX display controller IC. It requires three data lines and two power lines It is easy to use and compatible with Arduino systems. The LED brightness adjustment can be implemented in software. The modules can be chained over serial interface to grow the display dimension according to your needs. Technical Specifications Operating Voltage VDC Typical Voltage 5V Operating Current 320mA Max Operating Current 2A LED Colour: Red Operating Temperature: 0 to 50C PCB Dimensions: 1.26in x 2.0in Overall height: 0.55 in 8×8 LED Matrix Size: 1.25in x 1.25in

Product Description MAXV to 5.5V, Low-Power, True RS-232 Transceivers Module with DB9 Female Connector and Power Indicator LED. Technical Specifications Size: 27mm x 30mm / 1.06″x1.18″(inch) (approx) Weight:16 g Translator IC: MAX TTL Header Pitch: 2.54mm / 0.1in DB9 Connector Type: Female Operating Voltage:3 V ~ 5.5 V Maximum Datarate: 120 kbps Temperature range: -40°C ~ 85°C Operation: Full Duplex Protocol: RS232 Transceiver: 2 (1 TTL -: RS TTL

Product Description MAXV to 5.5V, Low-Power, True RS-232 Transceivers Module. Technical Specifications Size: 10mm x 15mm (0.39” x 0.59”) Operating Voltage:3 V ~ 5.5 V Maximum Datarate: 120 kbps Temperature range: -40°C ~ 85°C Operation: Full Duplex Protocol: RS232 Transceiver: 2 (1 TTL -: RS TTL

Product Description SCMD Dots Graphic White on Blue LCD Display module. Technical Specifications Type: SCMD Controller: KS / KS Display Size: mm Display color: Blue Pixel color: White Operating Voltage: 5V ±0.25V Interface Type: 8-Bit Databus Parallel communication Pin pitch: 2.0mm (Standard 2.54mm / 0.1 inch header will not Install) Backlight LED Current:

Specifications: 20x4 LCD Backlight: Blue White Text Supply voltage: 5V PCB Size: 98mm×60mm Package include: 1 X LCD display module

3.5 inch TFT Touch LCD Screen Display Module For Arduino UNO R3, Resolution 480 x 320 R61509 and ili9327 controller 5V compatible! Use with 3.3V or 5V logic On board 3.3V at 300mA LDO regulator 4 white LED back light. On by default but you can connect the transistor to a digital pin for back light control 4-wire resistive touchscreen. Views: 13

Product Description This 16×2 character LCD module only uses 2 wire I2C interface. The I2C Interface Board is basically an IO expander board that helps minimize microcontroller / Arduino IO usage pin count. With this module, attached to the back of 16×2 character LCD Module, you can use only two pins (SDA and SCL) to write to LCD module. The typical operating voltage for these display modules is 5.0V. (The i2c backpack module can also be purchased separately. Please following this link) Technical Specifications Gross Weight (kg): Connection: Pin Header Display Format: 16×2 Character Outline Dimension: 80.0(W)x36.0(H)x11.5(T)mm Visual Area: mm Active Area: mm Character Size: mm Dot (Pixel) Size: mm Dot Pitch: mm IC Package: COB IC or Equivalent: AIP, HD, KS, SPLC780, ST Interface -bit Parallel, -bit Parallel Display Type: STN-LCD Blue Viewing Direction: 6:00 Appearance: White on Blue Backlight Color: White Color Backlight Current (Typ) 15mA Power Supply(Typ) 5V Supply Current for LCM (Max) uA Operating Temp -℃ Storage Temperature -℃

Product Description HD compatible 16×2 White on Blue LCD Module. The typical operating voltage for these display modules is 5.0V. Technical Specifications Gross Weight (kg): Connection: Pin Header Display Format: 16×2 Character Outline Dimension: 80.0(W)x36.0(H)x11.5(T)mm Visual Area: mm Active Area: mm Character Size: mm Dot (Pixel) Size: mm Dot Pitch: mm IC Package: COB IC or Equivalent: AIP, HD, KS, SPLC780, ST Interface -bit Parallel, -bit Parallel Display Type: STN-LCD Blue Viewing Direction: 6:00 Appearance: White on Blue Backlight Color: White Color Backlight Current (Typ) 15mA Power Supply(Typ) 5V Supply Current for LCM (Max) uA Operating Temp -℃ Storage Temperature -℃

Rectification: non-synchronous rectification Module Properties: non-isolated constant current and voltage module. This linear module has a constant voltage and constant current function (CC-CV). and it has a good performance. Adjustable output voltage, can up to 40V max Wide input voltage, can up to 35V max Suitable for boost power supply within 35W Specifications: Module Properties: Non-isolated step-up module (BOOST) Input Voltage: DC 3-40V Output Voltage: DC 5-45 V (adjustable) Input Current: 0-5A Efficiency:94 % Output ripple: less than 100mV Views: 1

A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update does not overwrite all of the display. MAX7219 also allows the user to select each of the data code or not coded. The entire device includes a 150?A low-power shutdown mode, analogue and digital brightness control, a scan-limit register allows the user to 1-8 bits of data, there is a LED light so that all the detection mode. Requires only three IO ports can drive a dot! No flashing dot matrix display! Support cascade! Single module can drive a common cathode 8 * 8 dot matrix Module Operating voltage: 5V Module size: 5 cm X 3.2 cm wide X 1.5 cm high Views: 15