Display lcd keypad shield

The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys select, up, right, down and left. FAIZAN MUNIR Mobile0 3002785860 Email sales matrixelectronic. com w w w.matrixelectronic. com Address Shop2, Hassan Centre Near Passport Office Saddar karachi

Product Description 2.4 inch TFT touch Screen LCD Module For Arduino. The LCD has excellent vivid color contrast. Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit different shades)! pixels with individual pixel control. It has way more resolution than a black and white display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. Technical Details: 2.4″ diagonal LCD TFT display resolution, 18-bit () color SPFD controller with built in video RAM buffer 8 bit digital interface, plus 4 control lines Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD Works with any Arduino ‘328 or Mega (Leonardo not supported yet) 5V compatible! Use with 3.3V or 5V logic Onboard 3.3V 300mA LDO regulator 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control 4-wire resistive touchscreen

This dfrobot lcd keypad shield male pin connector for arduino comprises a 1 6x2 blue lcd display and 6 momentary push buttons, from left to right, select, left, up, down, right and reset. the shield can be directly plugged onto an arduino duemilanove board, making soldering or fly wiring for connection unnecessary. pins 5,6, 7, 8 and 9 are used as the interface to the lcd. the shield operates at 5v Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 3002785860 Email sales matrixelectronic. com w w w.matrixelectronic. com Address Shop2, Hassan Centre Near Passport Office Saddar karachi

Product Description The LCD Keypad shield (DFRobot Compatible) is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

This is a Shield that plugs directly on Arduino for lots of functionality with no additional wiring. It has a Parallel LCD display that works with the standard Arduino LCD Library (with correct pin definitions). It has 5 pushbuttons that use only one Analog pin, with a supplied library to return button presses.

F8-T Black & White LCD Fingerprint Access Control Device Introduction: One touch, that’s all it takes for access control with ZK Software’s F8-T biometric reader that offer the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. Fast, reliable performance combined with affordability gives ZK readers the competitive edge. Each reader has the capacity to store up to fingerprint templates and transactions. Enrolling users is fast and easy, since most of our readers have a user-friendly keypad and display. Managing our readers is also simple. All our readers are easily accessed through a TCP/IP or serial port, with the ability to automatically update and synchronize when networked together. Features: ．Fingerprint reader with durable and highly accurate ZK optical sensor ．1-touch 1-second employee recognition ．Capacity to store template and transactions ．No need to enter PINs ．Supports 50 time zones, 5 groups and 10 unlock combinations ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Operates stand-alone without a computer ．TCP/IP, serial and Wiegand interfaces ．Real-time 1-touch data export to 3rd party hosted & non-hosted applications ．Audio-Visual indications for acceptance & rejection of valid and invalid fingerprints ．SDK available for OEM customers and software developers Specifications: Fingerprint Capacity templates Transaction Capacity Hardware Platform ZEM500 Sensor ZK Optical Sensor Keypad Touch keypad Algorithm Version ZK Finger v9.0 Communication RS, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm, Door Bell Wiegand Signal Input & Output Optional Function ID, Mifare Display B&W LCD Screen Power Supply 12V DC Operating Temperature 0 ℃- 45 ℃ Operating Humidity % Dimension(W*H*D)mm Gross Weight 0.95kg Connection Diagram: Catalogue Download: Hussain Ashok Khemani www.fingerpak.com Sales Office # 197, Mezzanine Floor, Ferozpurwala Centre, Jeswani Street, Serai Road, Karachi. Tell: . Web: www.fingerpak.com E-Mail: Box Pack- Warranty: 1 Year

F8-T Black & White LCD Fingerprint Access Control Device Introduction: One touch, that’s all it takes for access control with ZK Software’s F8-T biometric reader that offer the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. Fast, reliable performance combined with affordability gives ZK readers the competitive edge. Each reader has the capacity to store up to fingerprint templates and transactions. Enrolling users is fast and easy, since most of our readers have a user-friendly keypad and display. Managing our readers is also simple. All our readers are easily accessed through a TCP/IP or serial port, with the ability to automatically update and synchronize when networked together. Features: ．Fingerprint reader with durable and highly accurate ZK optical sensor ．1-touch 1-second employee recognition ．Capacity to store template and transactions ．No need to enter PINs ．Supports 50 time zones, 5 groups and 10 unlock combinations ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Operates stand-alone without a computer ．TCP/IP, serial and Wiegand interfaces ．Real-time 1-touch data export to 3rd party hosted & non-hosted applications ．Audio-Visual indications for acceptance & rejection of valid and invalid fingerprints ．SDK available for OEM customers and software developers Specifications: Fingerprint Capacity templates Transaction Capacity Hardware Platform ZEM500 Sensor ZK Optical Sensor Keypad Touch keypad Algorithm Version ZK Finger v9.0 Communication RS, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm, Door Bell Wiegand Signal Input & Output Optional Function ID, Mifare Display B&W LCD Screen Power Supply 12V DC Operating Temperature 0 ℃- 45 ℃ Operating Humidity % Dimension(W*H*D)mm Gross Weight 0.95kg Connection Diagram: Catalogue Download: Fingerpak www.fingerpak.com Box Pack- Warranty: 1 Year

2.4 inch LCD TFT display Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control Colorful, 18-bit different shades 4-wire resistive touchscreen 240 x 320 resolution

Brand: Accessories & Gadgets Price: 700 Seller Type: An Individual Condition: New "with the limited pin resources, your project may be out of resources using normal lcd shield. with this i2c interface lcd module, you only need 2 lines i2c to display the information. if you already has i2c devices in your project, this lcd module actually cost no more resources at all. fantastic for arduino based project. specification i2c address: 0x27 back lit blue with white char color supply voltage: 5v size:82x35x18 mm weight:40 gram"

Price: 250 Seller Type: An Individual Condition: New "Features: This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project. I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself) Supply voltage: 5V the backlight and contrast is adjusted by potentiometer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable I2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself) Compatible for LCD Weight:5g Size:5.5x2.3x1.4cm Package Contents: 1x IIC/I2C/TWI/SPI Serial Interface Module Port" Call me at: .

MA300 Black & White LCD Fingerprint Access Control Device Introduction: MA300 is an innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The MA300 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The device offers the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. The user can be enrolled by administrator card when the device works as a standalone access control. TCP/IP and RS485 are available that the device can be used in different network. TCP/IP communication makes sure the data transition between the device and the PC can be easily done within several seconds. MA300 can be used in tough environment because of the IP54 protection index and the wide range of operating temperature. Features: ．Fingerprint reader with durable and highly accurate ZK optical sensor ．1 touch a-second user recognition ．Stores templates, cards and transactions ．Reads Fingerprint and/or Card ．Optional integrated smart card reader ．Built-in Serial and Ethernet ports ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Real-time 1-touch data export 3rd party hosted & non-hosted applications ．Audio-Visual indications for acceptance and rejection of valid/invalid fingers Specifications: Fingerprint Capacity templates ID card Capacity Transaction Capacity Hardware Platform ZEM710 Sensor ZK Optical Sensor Algorithm Version ZK Finger v10.0 Communication RS485, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm Wiegand Signal Input & Output Stardard Access Control Function Time Zone, Group, Multi-identification, Duress mode, Anti-passback Optional Functions Mifare, external USB keypad Display N/A Power Supply 12V DC Operating Temperature - ℃ Operating Humidity % Index of Protection IP54 Connection Diagram: Catalogue Download: www.fingerpak.com Box Pack- Warranty: 1 Year

ZkTeco F8-t Time Attendance Machine. MSI Price:…………………………/- MSI Delivery:………………….….Free(in city) MSI warranty:…………………...One Year International.. F8-T RFID & FP F8-T is a Time & Attendance and Access Control terminal, characterized for its great flexibility and modern design with touch sensitive keypad. Specification: Capacity Fingerprint Capacity:....... Logs Capacity:................. Hardware Platform:....................ZEM500 CPU:...........................32bit ZK Microprocessor 400MHz Memory:....................8M RAM, 32M Flash Sensor:......................ZK Optical Sensor Relay contact:…......Electric lock, door sensor, exit button, alarm, Door Bell Display LCD:........................122x32 dots LED Indicator:…....Green / Red MINOLTA SYSTEMS INTERNATIONAL (Office Solutions & Communication services) Zafar Ali Road, Gulberg, Lahore. Box Pack- Warranty: 1 Year

ZkTeco F8-t Time Attendance Machine. MSI Price:……………………………/- MSI Delivery:……………………….Free(in city) MSI warranty:……………………..One Year International.. F8-T RFID & FP F8-T is a Time & Attendance and Access Control terminal, characterized for its great flexibility and modern design with touch sensitive keypad. Specification: Capacity Fingerprint Capacity:.......... Logs Capacity:...................... Hardware Platform:....................ZEM500 CPU:.............................32bit ZK Microprocessor 400MHz Memory:....................8M RAM, 32M Flash Sensor:.......................ZK Optical Sensor Relay contact:…......Electric lock, door sensor, exit button, alarm, Door Bell Display LCD:..........................122x32 dots LED Indicator:…....Green / Red MINOLTA SYSTEMS INTERNATIONAL (Office Solutions & Communication services) 042-....Fax. Zafar Ali Road, Gulberg, Lahore. Box Pack- Warranty: 1 Year

F8-T Black & White LCD Fingerprint Access Control Device Introduction: One touch, that’s all it takes for access control with ZK Software’s F8-T biometric reader that offer the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. Fast, reliable performance combined with affordability gives ZK readers the competitive edge. Each reader has the capacity to store up to fingerprint templates and transactions. Enrolling users is fast and easy, since most of our readers have a user-friendly keypad and display. Managing our readers is also simple. All our readers are easily accessed through a TCP/IP or serial port, with the ability to automatically update and synchronize when networked together. Features: ．Fingerprint reader with durable and highly accurate ZK optical sensor ．1-touch 1-second employee recognition ．Capacity to store template and transactions ．No need to enter PINs ．Supports 50 time zones, 5 groups and 10 unlock combinations ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Operates stand-alone without a computer ．TCP/IP, serial and Wiegand interfaces ．Real-time 1-touch data export to 3rd party hosted & non-hosted applications ．Audio-Visual indications for acceptance & rejection of valid and invalid fingerprints ．SDK available for OEM customers and software developers Specifications: Fingerprint Capacity templates Transaction Capacity Hardware Platform ZEM500 Sensor ZK Optical Sensor Keypad Touch keypad Algorithm Version ZK Finger v9.0 Communication RS, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm, Door Bell Wiegand Signal Input & Output Optional Function ID, Mifare Display B&W LCD Screen Power Supply 12V DC Operating Temperature 0 ℃- 45 ℃ Operating Humidity % Dimension(W*H*D)mm Gross Weight 0.95kg Connection Diagram: Catalogue Download: www.fingerpak.com Box Pack- Warranty: 1 Year

F8-T Access Control Fingerprint Standalone Introduction: One touch, that’s all it takes for access control with ZK Software’s F8-T biometric reader that offer the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. Fast, reliable performance combined with affordability gives ZK readers the competitive edge. Each reader has the capacity to store up to fingerprint templates and transactions. Enrolling users is fast and easy, since most of our readers have a user-friendly keypad and display. Managing our readers is also simple. All our readers are easily accessed through a TCP/IP or serial port, with the ability to automatically update and synchronize when networked together. Features: ．Fingerprint reader with durable and highly accurate ZK optical sensor ．1-touch 1-second employee recognition ．Capacity to store template and transactions ．No need to enter PINs ．Supports 50 time zones, 5 groups and 10 unlock combinations ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Operates stand-alone without a computer ．TCP/IP, serial and Wiegand interfaces ．Real-time 1-touch data export to 3rd party hosted & non-hosted applications ．Audio-Visual indications for acceptance & rejection of valid and invalid fingerprints ．SDK available for OEM customers and software developers Specifications: Fingerprint Capacity templates Transaction Capacity Hardware Platform ZEM500 Sensor ZK Optical Sensor Keypad Touch keypad Algorithm Version ZK Finger v9.0 Communication RS, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm, Door Bell Wiegand Signal Input & Output Optional Function ID, Mifare Display B&W LCD Screen Power Supply 12V DC Operating Temperature 0 ℃- 45 ℃ Operating Humidity % Dimension(W*H*D)mm Gross Weight 0.95kg For more info www.askhitech.com FOR MORE INFO Y NEW PRODUCTS & PRICE Visit www.fingerpak.com karachi Pakistan Box Pack- Warranty: 1 Year