Denon surround system amplifier

Assalam Alaikum I want to sale this amplifier AVR-3200, 110V volts, Made in Japan, Awesome Bass and Sound Quality, original pics Attached Price is Reduced and Dead Final with 220 to 110v Spply No Bargain Location is G-9/4 Islamabad

Denon AVR-900 Amplifier 220Volts 5.1 Channel 4 Front Speaker Output 2 Rear Speaker Output 1 Center Speaker Output works like 7.1 Channel Dolby, ProLogic and dynamic surround Circuit Excellent Equilizer with Remote Control Built-in FM Radio Excellent condition Made in Japan purchased from USA Condition: 9/10 - No Warranty

Specifications Power output: 80 watts per channel into 8? (stereo) Surround output: 80W (front), 80W (center), 80W (rear) and 80w surround back Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.08% Input sensitivity: 200mV (line) Signal to noise ratio: 98dB (line) Speaker load impedance: 6? to 16? Digital inputs: coaxial, optical Condition= 9/10 Weight: 11.3kg Note =price is lil bit negotiable for serious bauyr's u can check this in shamsabad rawalpindi

golden in colour Form Integrated Amplifier Output power 100W+100W (4 ohms, 1kHz, EIAJ) THD 0.02% (25W, 1kHz, 8ohms) Line-in frequency response 5Hz-100kHz+0 -3 dB (outputs 1W and 8ohm) Output terminal Speaker AorB: 4ohms - 16ohms Speaker A+B: 8ohm-16ohm Input sensitivity/impedance Phono MM: 2.5mV/47kohm Line: 150mV/47kohm (at the time of sauce direct-on) Output power Pre out:1V(1kHz) Phono RIAA deflection 20Hz-20kHz±0.5dB Signal to noise ratio (the auditory sensation weighting A, input short circuit) Phono MM: 86dB (at the time of a 5mV input) Line: 107dB (at the time of sauce direct-on) Tone control Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) Loudness + 6dB (100Hz), +6dB (40kHz) Power supply voltage AC100V, 50Hz/60Hz Power consumption 135W Dimensions (a base, a knob, a terminal included) Width 434x height 120x depth of 338mm Weight 7.3kg Attachment: System remote control Dimensions Width 54x height 155x depth of 29mm Weight About 100g

Ability to play 10inches speaker heavy base bosted system (technics USA company)..mic,phones etc options and a resistance box (110 volt)

Very powerful amplifier working perfectly. Original aiwa, made in Japan. You can see in pics above. Room shaking base. Selling it because I want an upgrade. Condition from out side is good (pics m flash ki waja se thori kharab lag rahi hai). And overall 9.5/10.

Denon Home Theater Amplifier with reasonably good condition with following specs Specifications. Power output: 75 watts per channel into 8Ω (stereo). Surround output: 75W (front), 75W (center), 75W (rear). Frequency response: 20Hz to 20kHz. Input sensitivity: 200mV (line). Signal to noise ratio: 90dB (DIN). Speaker load impedance: 6Ω to 16Ω. Dimensions: 434 x 147 x 417mm. Weight: 10.8kg Operating Voltage is 110 V DTS, Dolby Prologic I and II,Stereo, Matrix, and many other modes No remote available Price Final and no exchange offers

Denon Dolby sound system 220watt amplifier and speakers in good condition... outclass sound Condition: 9/10 - No Warranty

Its available in mind condition, sealed and 100% genuine. Made In Japan Only calls will be answered. Price is final DTS-ES (Extended Surround) decoder that realizes 6.1 channel surround playback Dolby Pro Logic II for superior sound field playback Equipped with an AAC decoder corresponding to BS digital voice All channels Same power Discrete configuration with the same response 6ch power amplifier Equipped with D terminal (compatible with D4 video), supporting higher quality video Various surround modes that can be selected to suit your source and preference Subwoofer's crossover frequency can be switched (80 Hz, 100 Hz, 120 Hz) Equipped with a 6-channel extension input terminal aiming for future potential and development MAIN SPECIFICATIONS - AVC-2850 Audio section Power Amplifier Rated output / Front: 90W + 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W + 135W (6Ω, 1kHz) THD0.7% Center: 90W (20Hz ~ 20kHz, 8Ω, THD0.05%), 135W THD 0.7% THD 0.7% Surround back: 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.) THD 0.7% Surround: 90 W + 90 W (20 Hz to 20 kHz, 8 ohm, THD 0.05%), 135 W + 135 W (6 ohm, 1 kHz) 05%), 135 W (6 Ω, 1 kHz) THD 0.7% Practical maximum output / Front: 150W + 150W (6Ω, EIAJ) Center: 150W (6Ω, EIAJ) surround: 150W + 150W (6Ω, EIAJ) surround back: 150W (6Ω, EIAJ) Output terminal / Front: [A or B] 6 to 16 Ω, [A + B] 8 to 16 Ω, center, surround, surround back: 6 to 16 Ω Analog section Input sensitivity / impedance / 200mV / 47kΩ frequency characteristic / 10Hz ~ 100kHz: + 0dB, -3dB (direct mode) SN ratio / 102dB (direct mode) strain rate /0.005% (20Hz ~ 20kHz) (direct mode) rated Output / 1.2V [Digital part (D / A output)] Rated output / 2 V (at 0 dB playback) Total harmonic distortion ratio / 0.008% (0 dB at 1 kHz) SN ratio / 102 dB dynamic range / 96 dB [Phono Equalizer part (PHONO input REC OUT)] Input sensitivity / 2.5 mV RIAA deviation / ± 1 dB (20 Hz to 20 kHz) SN ratio / 74 dB (at JIS-A, 5 mV input) Distortion rate / 0.03% (at 1 kHz, 3 V output) Rated output / maximum output / 150 mV / 7 V Video section [Standard video terminal] Input level / impedance / 1 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz z: + 0 dB, -3 dB S video terminal Input level / impedance / Y (luminance) signal: 1 Vp - p / 75 Ω, C (color) signal: 0.286 Vp - p / 75 Ω frequency characteristics / 5 Hz to 10 MHz: +0, -3 dB Component video terminal P / C (blue) signal: 0.7 Vp - p / 75 Ω, PR / CR (red) signal: 0.7 Vp - p / 75 Ω Frequency response / input level / impedance / Y (luminance) signal: 1 Vp - 5 Hz to 27 MHz: +0, -3 dB Overall Power supply / AC 100 V · 50/60 Hz Power consumption / 235 W (less than 2 W at standby)　 Maximum external dimensions / W 434 × H 171 × D 416 mm mass / 11.5 kg

Price: Seller Type: An Individual Condition: Used SALAM i watn to sale my amlifier its org denon modle no avc ormAV control amplifier Output power At the time of the Dolby prologicFront: 100W 100W Center: 50W 50W Rear: 50W 50WMain input frequency response5Hz- u can play 4 main speaker 2 center 2 surround At a time U can chek in my home totaly org piece not any falut never reapiar cond 10/9 org pic attached cheap price

Specifications Power output: 80 watts per channel into 8? (stereo) Surround output: 80W (front), 80W (center), 80W (rear) and 80w surround back Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.08% Input sensitivity: 200mV (line) Signal to noise ratio: 98dB (line) Speaker load impedance: 6? to 16? Digital inputs: coaxial, optical Condition= 9/10 Weight: 11.3kg Note =price is lil bit negotiable for serious bauyr's u can check this in shamsabad rawalpindi Views: 182

Hifi dts amplifier 80 watts per chanel 7 speaker play at a time 4 main 2 surround 1 center Org pic attached Address samnabad nadeem shahead road

410 watts power consumption 110 watts front channel 6 ohm 110 watts center channel 6 ohm 110 watts surround channel 6 ohm The amplifier is in relatively good condition.

best amplifier for movies and music gave all clear effect in movies and music 150 watts in 6 ohm center and surround also 150 watts power consumption 310 watts amp is in very good condiion never repair first chek sound quality then buy org pics attached Views: 2

AVR-X6200W 9.2 Channel Full 4K Ultra HD AV Receiver with 11.2 channel processing, Wi-Fi, Bluetooth®, Dolby Atmos, DTS:X, HDCP2.2/HDR, MultEQ XT32, 8/3 HDMI In/Out, AL24 plus, Monolithi DTS HD Master / DTS:X / (update) DTS Neo:X / DTS Neural:X /  (11ch) (update) Dolby TrueHD / Dolby Atmos /  Dolby ProLogic Ilz / Dolby Surround /  Auro 3D (upgrade) Audyssey DSX Multichannel Stereo Max Number of Processing (Preamp) Channels