Denon integrated stereo

golden in colour Form Integrated Amplifier Output power 100W+100W (4 ohms, 1kHz, EIAJ) THD 0.02% (25W, 1kHz, 8ohms) Line-in frequency response 5Hz-100kHz+0 -3 dB (outputs 1W and 8ohm) Output terminal Speaker AorB: 4ohms - 16ohms Speaker A+B: 8ohm-16ohm Input sensitivity/impedance Phono MM: 2.5mV/47kohm Line: 150mV/47kohm (at the time of sauce direct-on) Output power Pre out:1V(1kHz) Phono RIAA deflection 20Hz-20kHz±0.5dB Signal to noise ratio (the auditory sensation weighting A, input short circuit) Phono MM: 86dB (at the time of a 5mV input) Line: 107dB (at the time of sauce direct-on) Tone control Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) Loudness + 6dB (100Hz), +6dB (40kHz) Power supply voltage AC100V, 50Hz/60Hz Power consumption 135W Dimensions (a base, a knob, a terminal included) Width 434x height 120x depth of 338mm Weight 7.3kg Attachment: System remote control Dimensions Width 54x height 155x depth of 29mm Weight About 100g

Integrated Stereo Audio Amplifier System Bass Treble MID Volume Power: 400 watt AC IN: 220v With 2 Speaker box: 12" Subwoofer 2 MID 2 Tutor Color: Black Best for Home theater

A-9030 Where to buy? Technical Details Product Support Videos & Social Media Technical Details Features FEATURES 65 W/Ch (8 ?, 1 kHz, 0.08% THD, 2 Channels Driven, IEC) Three-Stage Inverted Darlington Circuitry WRAT (Wide Range Amplifier Technology) Phase-Matching Bass Boost High-Current Low-Impedance Drive Thick, Low-Impedance Bus Bar for Perfect Ground Potential Two 8,200 µF Capacitors Optimum Gain Volume Control Direct Mode 1.6 mm Full Flat Chassis Aluminum Front Panel Tone Control (Bass/Treble/Balance) 5 Analog Audio Inputs and 1 Output Phono Input (MM) Subwoofer Pre-Out Speaker A/B Drive Banana Plug-Compatible Speaker Posts Headphone Jack RI (Remote Interactive) Remote Control WRAT (Wide Range Amplifier Technology) for Naturally Vivid Sound Onkyo developed the WRAT suite of technologies to improve the clarity and character of amplified audio. The technologies work to reduce noise across the frequency range, guaranteeing a clear, balanced, and natural sound. It achieves this by employing a low negative feedback amplifier design, preserving the essential energy and life contained within the recording; using closed ground-loops to cancel unwanted noise from individual circuits; and by enabling high current flows to cancel reflex energy from the speakers. Innovative Three-Stage Amplifier Circuit Brings Your Music to Life While some hi-fi makers take a shortcut to amplified audio with the use of cheap all-in-one IC chips, the resulting sound is often compromised once you turn the volume up. Instead, on the A-9030, Onkyo uses the same Three-Stage Inverted Darlington Circuitry technology it uses in its high-end A/V receivers and Reference Series hi-fi separates. This innovative circuit topology facilitates high speaker-driving power, reduces distortion, and preserves the buoyancy and expressiveness of recorded music—a unique characteristic of our low negative feedback amplifiers. Optimal Gain Volume Control Guarantees Cleaner Sound Conventional volume-attenuation methods involve initially dropping a signal close to the amplifier’s natural noise floor at low volumes. The signal can then become tainted with noise, which subsequently gets amplified along with the signal. Onkyo’s Optimum Gain Volume Control Circuitry adjusts the gain so that less than half the typical amount of attenuation is necessary. The signal never comes close to the noise floor, and the result is noticeably clearer sound when compared to conventional amplifier designs. Phase-Matched Bass Boost for Deeper Bass and a Clearer Mid-Range From the warm low notes produced by a cello to the deep frequencies of electronic music, a good amplifier should be able to deliver plenty of bass without distorting. Some amplifiers are prone to the effects of phase shifting, which can overwhelm middle frequencies and muddy the overall sound. Our Phase-Matching Bass Boost technology effectively preserves mid-range clarity—allowing vocals and strings to shine—while maintaining a smooth, natural bass response at all volume levels. Discrete Output Stage Circuitry Means Cooler Running Temperatures A receiver’s ability to deliver high power into low impedances is a vital factor in its performance. If the current flow through the amplification circuit is inconsistent, audio quality will suffer. Onkyo stereo amplifiers feature separate high-quality components at the signal output stage. Discrete transistors help guarantee a consistent, stable supply of current to the speaker system for an open and assured performance, with less chance of distortion and cooler running temperatures. High-Output Power Supply to Drive Your Speakers At the heart of all our amplifiers, you’ll find a power supply that can maintain or increase output power as required. Musically, this means that you have deep, powerful bass; wide-ranging dynamics; musical peaks that sound composed; and correct timbre and sound staging. When paired with a set of quality loudspeakers, Onkyo am Views: 454

His work is good and it has many functions radio CD player and tape stereo system

Price: Seller Type: An Individual Condition: New Continuous power 120 watts 120 watts Two transformers one for each channel. Original genuine condition. Made in Japan. Demand Rs./-

Denon PMA 2000 Loud Clear and power it will drive any speaker Range 150 to 250 rms speaker) with ease and detail very nice machine

Denon Home Theater Amplifier with reasonably good condition with following specs Specifications. Power output: 75 watts per channel into 8Ω (stereo). Surround output: 75W (front), 75W (center), 75W (rear). Frequency response: 20Hz to 20kHz. Input sensitivity: 200mV (line). Signal to noise ratio: 90dB (DIN). Speaker load impedance: 6Ω to 16Ω. Dimensions: 434 x 147 x 417mm. Weight: 10.8kg Operating Voltage is 110 V DTS, Dolby Prologic I and II,Stereo, Matrix, and many other modes No remote available Price Final and no exchange offers

Denon avr 1800 Stereo and DTS amplifier made in japan with Japani supply No repair no hidden fault call and sms any time

Denon AVR 1610 5.1 multi 2 zone Not repairable & not faulty learner remote control 110 watts adopter Price little-bit negotiable not a foolish offer & time waster only call reply (not email & sms reply) specs: 3 hdmi 75 watts x 5 into 8 ohms (20-20,000 Hz) at 0.08% THD Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ Neo X High Resolution Audio.video, Dolby® Digital EX, DTS-ES™, Pro Logic® IIz, and DTS Neo:6 decoding mono stereo, Virtual, matrix, direct, Surround Dolby® 7 Multi channel,Rock Arena, jazz arena, movie, music, Game, pure, front aux 192kHz/24-bit digital-to-analog converters for all channels 1080p-compatible HDMI digital audio/video switching (3 in, 1 out) analog-to-HDMI video conversion (480i to 480p only) HDMI version 1.3a with support for 1080p, Deep Color, and x.v.Color component video switching (2 in, 1 out) digital audio inputs: 2 optical, 2 coaxial 4 audio/video inputs, including: 1 front-panel input with composite video 3 rear-panel inputs (all include composite, 1 includes S-video) 3 audio-only inputs 2 sets of main speaker outputs Views: 32

Stereo Surround Sound + High-Quality Integrated Audio Chip Buttonless + touch Control Improved Battery Performance BassPro i12 Product weight: 4-5g (single earphone). BassPro i12 Working time: 2-3 hours. i12 Standby time: 100/h for one ear and 60/h for both ears. i12 Charging time: 1-1.5 hours. i12 earphone battery capacity: 35mAh. TWS i12 Sensor HIGH QUALITY]-TWS i12 Smart Mini Universal Dual Pair Bluetooth Earbuds Sport Stereo Earphone With Charging Dock for both and android-Touch Sensor Double touch for new upgrade function --- Use 2 Earbuds Together or Separately. 1. The normally paired earbuds and normal connection with the phone. Only 1 led blink fast, and only 1 "i12" signal was found on the phone. 2. How to unpaired 2 earbuds and use them separately to connect with 2 phones. Deleted the pairing with the phone. Double touch to unpair 2 earbuds 2 led blink fast, and find 2 "i12" signals on the phone. Connect one by one to use separately. 3. How to pair 2 earbuds again. Deleted the pairing with the phone. Double touch again to pair 2 earbuds 1 led blink fast again, and find 1 "i12" signal on the phone. Tips: There is a voice prompt when 2 earbuds are connected and disconnected, you can wear 2 earbuds to hear it. If you failed to pair 2 earbuds back, please long touch to turn them off, and take them out to try again. Support Pop Up Function for IOS above 12.1. Please Take the Earbuds Out to Connect with Phone. If you have any other questions after you receive our product, please contact us first, we will try our best to solve them for you. Specifications of i12 Tws Touch Sensor Airpod_ Dual Pair High-quality Earbuds Sport Stereo wireless Earphone With Charging Case for both Ios and android BrandNo BrandSKU261724727_PK-1479750235Wireless TypeBluetoothWearing TypeIn-EarHeadphone FeaturesWater Resistant,Noise Cancellation,Noise Isolating,Built in Microphone,DJ,Studio,NFCBluetoothYesExpress deliveryLahore What’s in the box 1x two i12

Up for sale is Denon Precesion Audio Hi Fi stereo integrated Amplifier PMA-255 in mint original condition, never repaired etc. Its a vintage amplifier in scratchless condition working perfectly. Only for those who understand and like to listen quality sound with proper detail. 110 V made in Japan. Can be seen in Wapda Town. Price is final. Weights around 12 kgs

DTS HD Master / DTS ES / DTS o / o / o Dolby TrueHD / Dolby Digital EX / ProLogic IIx o / o / o Audyssey DSX o Dolby ProLogic IIz o DTS-Neo:X o (7.1) Multichannel Stereo o max. number of processing (preamp) channels 7.1 SOUND ENHANCEMENTS Discrete Power Amplifier o Pure Direct o High Grade Audio Components o Audyssey MultEQ XT (PRO) Audyssey Dynamic EQ / Dynamic Volume o / o Compressed Audio Restorer o NETWORK DLNA Certified o (v1.5) Lossy formats MP3 / WMA / AAC o / o / o Lossless formats FLAC / ALAC / WAV o / o / o FLAC HD o WAV o ALAC o Gapless playback o (FLAC, WAV) Photo streaming (JPEG) o AirPlay audio streaming o Windows PlayTo / Windows8 certified o / o Internet Radio (vTuner) o Spotify* o Compatible with Remote APP for Smart Phones Android/iOS Ethernet o HDMI MULTIROOM / CI OTHERS INPUTS/OUTPUTS Composite In / Out 3 / - Component In / Out 2 / - HDMI In / Out 6+1 / 2 Multi-Room Video Out: Video / HDMI - / o Analogue In / Out 5 / - Digital Optical In / Out 2 / - Digital Coaxial In / Out 2 / - Multi-Room Out: analog / digital 1 / - Multichannel Pre Out / Main In o (7.2) / - Subwoofer Out 2 Speaker Terminal: Gold plated screw / regular screw - / o Number of speaker terminals 7 Speaker A / B assignable Bi-amp drive assignable Multi-Room Speaker Terminal assignable Remote Control In / Out o / o Network: (IP-control / update) o / o RS232C o DC Triggers 1 Front Inputs: Audio / Composite / Digital (Opt) / HDMI / USB - / - / - / o / o USB Audio / Made for iPod / Works with iPhone o / o / o Specifications number of poweramps 7 Power Output (6 ohm, 1 kHz, 1% 1ch Drive) 180 W Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) 135 W Power Output (8 ohm, 20 Hz - 20 kHz, ch Drive) 105 W FM Tuner with RDS

Specifications Power output: 80 watts per channel into 8? (stereo) Surround output: 80W (front), 80W (center), 80W (rear) and 80w surround back Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.08% Input sensitivity: 200mV (line) Signal to noise ratio: 98dB (line) Speaker load impedance: 6? to 16? Digital inputs: coaxial, optical Condition= 9/10 Weight: 11.3kg Note =price is lil bit negotiable for serious bauyr's u can check this in shamsabad rawalpindi

Specifications Power output: 80 watts per channel into 8? (stereo) Surround output: 80W (front), 80W (center), 80W (rear) and 80w surround back Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.08% Input sensitivity: 200mV (line) Signal to noise ratio: 98dB (line) Speaker load impedance: 6? to 16? Digital inputs: coaxial, optical Condition= 9/10 Weight: 11.3kg Note =price is lil bit negotiable for serious bauyr's u can check this in shamsabad rawalpindi Views: 182

Output 105 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio, Dolby® Digital EX, DTS-ES™, Pro Logic® IIz, and DTS Neo:6 decoding Audyssey Laboratories' MultEQ® six-point auto setup and room calibration system (microphone included) Audyssey Dynamic Volume mode to keep listening levels steady Audyssey Dynamic EQ™ for fuller sound at lower listening levels dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room) A/B/A+B speaker switch, Audio Return Channel (ARC), Audyssey Dynamic EQ, Audyssey Dynamic Volume, Audyssey MultEQ, auto sound calibration, dual-zone capability, iPod ready, source direct 6 HDMI input x 1 HDMI monitor/output, dual sub woofer output