Dc boost

Rectification: non-synchronous rectification Module Properties: non-isolated constant current and voltage module. This linear module has a constant voltage and constant current function (CC-CV). and it has a good performance. Adjustable output voltage, can up to 40V max Wide input voltage, can up to 35V max Suitable for boost power supply within 35W Specifications: Module Properties: Non-isolated step-up module (BOOST) Input Voltage: DC 3-40V Output Voltage: DC 5-45 V (adjustable) Input Current: 0-5A  Efficiency:94 % Output ripple: less than 100mV Website http://electronicspanga.com

features: modules nature: non isolated step up boost rectification: non synchronous rectification input voltage: 3.5v 35v output voltage: 5v 56v must ensure that set the output voltage is higher than the input voltage input current: 3a max,rated current:2a conversion efficiency: 90 percent dimension: 4.3cm x 3.0cm x 1.2cm applications: diy a mobile power supply boost charger power supply for electronic equipment

features: modules nature: non isolated step up boost rectification: non synchronous rectification input voltage: 3.5v 35v output voltage: 5v 56v must ensure that set the output voltage is higher than the input voltage input current: 3a max,rated current:2a conversion efficiency: 90 percent dimension: 4.3cm x 3.0cm x 1.2cm applications: diy a mobile power supply boost charger power supply for electronic equipment" Box Pack - No Warranty

Features Input voltage: V, Output voltage: adjustable V, Output Current: 10A MAX, Conversion efficiency: 94 percent; load regulation: +/-0.5percent; voltage regulation: +/-0.5percent Other DIY an output adjustable power inverters, boost charger, etc. Packing List 1 x Step-up mobile power supply module Dimensions: 2.56 in x 1.85 in x 0.87 in (6.5 cm x 4.7 cm x 2.2 cm Weight: 2.29 oz 65 g" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features Input voltage: V, Output voltage: adjustable V, Output Current: 10A MAX, Conversion efficiency: 94 percent; load regulation: +/-0.5percent; voltage regulation: +/-0.5percent Other DIY an output adjustable power inverters, boost charger, etc. Packing List 1 x Step-up mobile power supply module Dimensions: 2.56 in x 1.85 in x 0.87 in (6.5 cm x 4.7 cm x 2.2 cm Weight: 2.29 oz 65 g" Facebook page;ElectronicsArena.com

Features Input voltage: V, Output voltage: adjustable V, Output Current: 10A MAX, Conversion efficiency: 94 percent; load regulation: +/-0.5percent; voltage regulation: +/-0.5percent Other DIY an output adjustable power inverters, boost charger, etc. Packing List 1 x Step-up mobile power supply module Dimensions: 2.56 in x 1.85 in x 0.87 in (6.5 cm x 4.7 cm x 2.2 cm Weight: 2.29 oz 65 g" Box Pack - No Warranty

features input voltage: v, output voltage: adjustable v, output current: 10a max, conversion efficiency: 94 percent load regulation: plus 0.5 percent voltage regulation: plus 0.5 percent other diy an output adjustable power inverters, boost charger, etc. packing list 1 x step up mobile power supply module dimensions: 2.56 in x 1.85 in x 0.87 in 6.5 cm x 4.7 cm x 2.2 cm weight: 2.29 oz 65 g

features input voltage: v, output voltage: adjustable v, output current: 10a max, conversion efficiency: 94 percent load regulation: plus 0.5 percent voltage regulation: plus 0.5 percent other diy an output adjustable power inverters, boost charger, etc. packing list 1 x step up mobile power supply module dimensions: 2.56 in x 1.85 in x 0.87 in 6.5 cm x 4.7 cm x 2.2 cm weight: 2.29 oz 65 g " Box Pack - No Warranty

DIY a power supply, 12V can input and output can 12-50V adjustable. 2. the power supply for your electronic device, according to your system can set the output voltage value. 3. as the car power supply for your laptop, PDA or a variety of digital products supply.

Module based on:TP4056 The module can manage battery charging and discharging, and also has built in boost converter to boost the voltage to match load conditions Charging voltage: 4.2V DC Charging current: Max. 1A Discharging current: Max. 2A Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC (Continuously adjustable) Size: 3.3x2.3cm/1.3x0.91"

features: 7.0 tft lcd module, resolution 800x480, ssd controller lcd type: tft transmissive normal white interface: 8 16bit parallel bus interface pcb color: blue on board 400ma dc dc boost regulator to provide power supply to lcd backlight lcd specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. we have test the provided code, it gives the best display performanace module dimension: 186mmx106mmx23mm including pin header extrusion active area: 154mmx86mm pixel pitch: mmxmm standard 2xmm pin header for connection to mcu development board module weight: 410grams" Box Pack - No Warranty

Manufacturer: Emerson Emerson Liebert PSA ITON 850VA 230V AVR UPS PSA850-ID Specification: Start Function DC Start Function Power Function Green Power Function for energy saving Boost and Buck AVR Equipped with Boost and Buck AVR to stabilize the input voltage. Auto restart Auto restart while AC recovers. High reliability Microprocessor control guarantees high reliability. Compact size Compact size, Light weight. Protection Provides Modem and Phone line Surge Protection, Power Factor 0.6 Volts Ampere 850VA Dimension 181 x 51 x 241 mm Battery Bank 1 x 10 Ah Load 510 watts Back-up Time 5-10 Mins Provide AC Overload Protection Yes

Manufacturer: Emerson Emerson Liebert PSA ITON 850VA 230V AVR UPS PSA850-ID Specification: Start Function DC Start Function Power Function Green Power Function for energy saving Boost and Buck AVR Equipped with Boost and Buck AVR to stabilize the input voltage. Auto restart Auto restart while AC recovers. High reliability Microprocessor control guarantees high reliability. Compact size Compact size, Light weight. Protection Provides Modem and Phone line Surge Protection, Power Factor 0.6 Volts Ampere 850VA Dimension 181 x 51 x 241 mm Battery Bank 1 x 10 Ah Load 510 watts Back-up Time 5-10 Mins Provide AC Overload Protection Yes Box Pack- Warranty: 1 Year

Manufacturer: Emerson Emerson Liebert PSA ITON 600VA 230V AVR Serial UPS No Software PS600-BX Specification: Back-up Time Mins Volts Ampere 600VA Battery Bank 1 x 7 Ah Auto restart Auto restart while AC recovers. Compact size Compact size, Light weight. Protection Provides Modem and Phone line Surge Protection, Dimension 330 x 100 x 140 mm Load 360 watts Power Factor 0.6 High reliability Microprocessor control guarantees high reliability. Boost and Buck AVR Equipped with Boost and Buck AVR to stabilize the input voltage. Power Function Green Power Function for energy saving Start Function DC Start Functio Port Built-in RS-232 Communication Port. Provide AC Overload Protection Yes Box Pack- Warranty: 1 Year

Manufacturer: Emerson Emerson Liebert PSA ITON 600VA 230V AVR Serial UPS No Software PS600-BX Specification: Back-up Time Mins Volts Ampere 600VA Battery Bank 1 x 7 Ah Auto restart Auto restart while AC recovers. Compact size Compact size, Light weight. Protection Provides Modem and Phone line Surge Protection, Dimension 330 x 100 x 140 mm Load 360 watts Power Factor 0.6 High reliability Microprocessor control guarantees high reliability. Boost and Buck AVR Equipped with Boost and Buck AVR to stabilize the input voltage. Power Function Green Power Function for energy saving Start Function DC Start Functio Port Built-in RS-232 Communication Port. Provide AC Overload Protection Yes

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address: Box Pack- Warranty: 1 Year

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address:

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Box Pack- Warranty: 1 Year

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

  Brand: fangpusun Product Code: PR 3030 Availability: In Stock Price: Rs.8,000/- The Fangpusun PR 10-30 series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR 1010 PR1515 PR2020 PR3030 Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞50%/12.6V(25.2V) Deep discharge protection(SOC/LVD) ＜30%/11.1V(22.2V) Operating conditions Ambient temperature -10℃…+50℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

Brand: CyberPower Product Code: CPSE Availability: In Stock Price: Rs. ModelCPSE Capacity (VA / Watts)VA / 700W InputVoltage Range140Vac – 300Vac Frequency Range45Hz - 65Hz (Auto Sensing)DC Input Voltage12V Battery Pack Expansion-Output Number of PhaseSingle Phase UPS Outlets (Numbers)(2) Schuko or (2) FR or (2) UKOn Battery Output VoltagePure SineWave* at 220Vac /- 5%On Battery Output Frequency Hz /- 1% Over Voltage Protection Surge to 400V Transfer Time Overload ProtectionOn Utility: Circuit Breaker On Battery: Internal Current Limiting AVR Double Boost & Single Buck Charging Current15Amps Manual Switch mode-Surge Protection and FilteringLightning / Surge Protection Physical Dimensions(H x W x D)(mm)241 x 208 x 153 LOAD Trapezoidal Wave Contact: Solutions Inn www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn

SMC 2.4 GHz 1 Watt Power Over Ethernet Amplifier Losing signal strength across long lengths of cable is a common problem among networks. Instead of running costly lengths of low-loss RF coaxial cable, simply install SMC's SMCAMP-GHz 1 Watt Power over Ethernet Amplifier, and boost signal strength while remotely powering your antenna through common Category-5 cable. The POE (Power OverEthernet) Bi-Directional Amplifier uses the power coming through the Cat-5 cable tooperate itself and provide DC power to an external antenna, giving you the freedom of placing your antenna's where they need to be. Available Ex-stock - Quantity Pair. Delivery anywhere in Pakistan - Free Payment upon delivery in Islamabad/Rawalpindi/Lahore. Price mentioned is per piece & net cash.. Box Open - Never Used - No Warranty

Brand: CyberPower Product Code: CPSE Availability: In Stock Price: Rs. ModelCPSE Capacity (VA / Watts)VA / 700W InputVoltage Range140Vac – 300Vac Frequency Range45Hz - 65Hz (Auto Sensing)DC Input Voltage12V Battery Pack Expansion-Output Number of PhaseSingle Phase UPS Outlets (Numbers)(2) Schuko or (2) FR or (2) UKOn Battery Output VoltagePure SineWave* at 220Vac /- 5%On Battery Output Frequency Hz /- 1% Over Voltage Protection Surge to 400V Transfer Time Overload ProtectionOn Utility: Circuit Breaker On Battery: Internal Current Limiting AVR Double Boost & Single Buck Charging Current15Amps Manual Switch mode-Surge Protection and FilteringLightning / Surge Protection Physical Dimensions(H x W x D)(mm)241 x 208 x 153 LOAD Trapezoidal Wave Contact: Solutions Inn - www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn Box Pack- Warranty: 1 Year

LIBRA L-7080i The LIBRA L-7080i is an omni-directional presentation area imager bar code scanner, it uses digital imaging technology to provide intuitive and blazing reading of 1D and 2D bar codes without sacrificing scanning quality or performance. The L-7080i reader provides great performance and reliability along with a rich feature set to provide excellent value in virtually any desktop presentation bar code scanning system. With the L-7080i, not only can identify product pricing barcode label, furthermore, it is able to scan virtually mobile bar code on various types of display to enhance service levels. When space is limited but high performance is required, its compact size and footprint make it the ideal solution for space-constrained environments. Its precise imaging scan volume is perfect for hands-free scanning in confined spaces and helps reduce accidental misreads of items, improving productivity and customer satisfaction. The L-7080i reader includes a powerful configuration tool which allows easy integration into existing or new host systems, allows management to manage maintenance. General Lightweight and ergonomic design Read the most common 1D, 2D, composite and stacked codes, reduce your investment cost. Boost customer services with good ability to scan virtually mobile bar code on various types of display. With the most compact footprint can fit in the most space constrained areas. IP42 sealing protection design withstands for use in tough environments. Wallmount hanging for easy installation. Scanner head can be forward and backward adjusted in a total 102° range to accommodate to your application need. EAS compatible Best cost-effective investment. Specifications Performance Light Source 625± 5nm Red LED Depth of Field Up to 300mm@20 mil/0.5mm, PCS90% Scan Pattern Field of View 40° horizontal, 25° vertical Scan Rate 120 scans per second in 1D mode , 60 images per second in 2D mode Resolution 1D 4mil/0.1mm, 2D 5mil/0.127mm Print contrast ratio 30% Indicator Beeper and LED (Stand by Blue, Good read Orange) Interface USB, RS232 Physical Color Available Black(Scanner and Base)or Beige(scanner)and Dark Gray(base) Dimensions (WxHxL) 94 x 161.51 x 97.71mm Weight 325g Electronic Input Voltage DC +5V @2A Power Consumption 1.35W Operating Current 270mA Standby current 250mA Environmental Ambient light Up to 100,000 Lux Operating temperature 0°C ~ 40°C (32°F ~ 104°F) Storage temperature -10°C ~ 60°C (14°F ~ 140°F) Sealing IP42 EAS EAS compatible (standard) Symbologies Automatically discriminates major standard 1D and 2D bar codes, include GS1 databar - Omnidirectional, Expanded and Limited codes

Brand: CyberPower Product Code: CPSE Availability: In Stock ModelCPSE Capacity (VA / Watts)VA / 700W InputVoltage Range140Vac – 300Vac Frequency Range45Hz - 65Hz (Auto Sensing)DC Input Voltage12V Battery Pack Expansion-Output Number of PhaseSingle Phase UPS Outlets (Numbers)(2) Schuko or (2) FR or (2) UKOn Battery Output VoltagePure SineWave* at 220Vac /- 5%On Battery Output Frequency Hz /- 1% Over Voltage Protection Surge to 400V Transfer Time Overload ProtectionOn Utility: Circuit Breaker On Battery: Internal Current Limiting AVR Double Boost & Single Buck Charging Current15Amps Manual Switch mode-Surge Protection and FilteringLightning / Surge Protection Physical Dimensions(H x W x D)(mm)241 x 208 x 153 LOAD Trapezoidal Wave Contact: Solutions Inn - www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn Box Pack- Warranty: 1 Year

Description: Details Cloud Controller Delivered all over Pakistan   iShopping.pk brings you the best price for TP-Link Omada Cloud Controller (OC200) with express shipping all over Pakistan.   Details: Dedicated In Network Centralized Management The OC200 Omada Cloud Controller dedicate to provide centralized management for the whole Omada network. Monitor statistics in real-time, view a graphical analysis of network traffic, create a captive portal, upgrade and reboot your system, and easily scale your network to boost your business. Free Cloud Management – Anywhere, Anytime Omada offers free cloud access to its centralized management platform. Take your network with you, wherever you go. Industry Leading Hardware Design Equipped with an advanced hardware design and the latest chipset, OC200 has the impressive processing power to support the massive management of your business network. Guest Network with Facebook Wi-Fi and SMS Login Visitors have access to secure Wi-Fi with captive portal and wireless isolation technology. Newly added SMS authentication simplifies the connection process, while Facebook authentication raises the social media profile of your business. Even More Convenient with Omada App Remotely access and configure the OC200 from the convenience of your smartphone, wherever you are in the world.   Specification: HARDWARE FEATURES Interface 2 × 10/100Mbps Ethernet Port 1 × USB 2.0 Port for configuration backup 1 × Micro USB Port for power Power Supply 802.3af/at PoE or Micro USB（DC 5V/1A） Power Consumption 5 W Dimensions 3.9 × 3.9 × 1.0in. (100 × 98 × 25mm) FEATURES Management Scale 50 EAPs Wireless Fuction L3 Management Multi-SSID Load Balance Band Steering Airtime Fairness Beamforming Rate Limit Wireless Schedule QoS Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection AP Management Automatic Discovery  Unified Configuration Reboot Schedule Batch Firmware Upgrade LED ON/OFF Authentication WPA Personal and Enterprose Captive Portal Facebook login SMS authentication Voucher authentication OTHERS Certification FCC, RoHS Package Contents Omada Cloud Controller OC200 Quick Installation Guide Ethernet Cable System Requirements Internet Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description: Details iShopping.pk brings you the best price for TP-Link Omada Cloud Controller (OC200) with official warranty and express shipping all over Pakistan.   Dedicated In Network Centralized Management The OC200 Omada Cloud Controller dedicate to provide centralized management for the whole Omada network. Monitor statistics in real-time, view a graphical analysis of network traffic, create a captive portal, upgrade and reboot your system, and easily scale your network to boost your business. Free Cloud Management – Anywhere, Anytime Omada offers free cloud access to its centralized management platform. Take your network with you, wherever you go. Industry Leading Hardware Design Equipped with an advanced hardware design and the latest chipset, OC200 has the impressive processing power to support the massive management of your business network. Guest Network with Facebook Wi-Fi and SMS Login Visitors have access to secure Wi-Fi with captive portal and wireless isolation technology. Newly added SMS authentication simplifies the connection process, while Facebook authentication raises the social media profile of your business. Even More Convenient with Omada App Remotely access and configure the OC200 from the convenience of your smartphone, wherever you are in the world.   Specification: HARDWARE FEATURES Interface 2 × 10/100Mbps Ethernet Port 1 × USB 2.0 Port for configuration backup 1 × Micro USB Port for power Power Supply 802.3af/at PoE or Micro USB（DC 5V/1A） Power Consumption 5 W Dimensions 3.9 × 3.9 × 1.0in. (100 × 98 × 25mm) FEATURES Management Scale 50 EAPs Wireless Fuction L3 Management Multi-SSID Load Balance Band Steering Airtime Fairness Beamforming Rate Limit Wireless Schedule QoS Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection AP Management Automatic Discovery  Unified Configuration Reboot Schedule Batch Firmware Upgrade LED ON/OFF Authentication WPA Personal and Enterprose Captive Portal Facebook login SMS authentication Voucher authentication OTHERS Certification FCC, RoHS Package Contents Omada Cloud Controller OC200 Quick Installation Guide Ethernet Cable System Requirements Internet Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing