Cisco access

Cisco access points air-Lap1142n-c-k9 air-ap1242ag-n-k9 air-ap1242g-a-k9 air-ap1231g-a-k9

The Cisco 9124AX Access points Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy.

Linksys Cisco Access Point with SES Real Pictures Attcahed 5dbi+5dbi Detachable antenna Perfect Working 100% ok Access Point & Adapter With Cable Only Price Final No SMS Only Call Contact - Usman Ali Condition: - No Warranty

Linksys Cisco Access Point with SES Real Pictures Attcahed 5dbi+5dbi Detachable antenna Perfect Working 100% ok Access Point & Adapter With Cable Only Price Final No SMS Only Call Contact - Usman Ali

Cisco Switches-48PS; Cisco /K9 router; GLC-SX-MM;GLC-T; Cisco port switches; NM-16ESW-1GIG; Cisco Access Points Box Pack - No Warranty

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

Cisco ASA The Cisco ASA is a full-featured firewall for small business, branch, and enterprise teleworker environments. The Cisco ASA delivers high-performance firewall, SSL and IPsec VPN, and rich networking services in a modular, “plug-and-play” appliance. Using the integrated graphical Cisco Adaptive Security Device Manager (ASDM), the Cisco ASA can be rapidly deployed and easily managed, enabling businesses to minimize operations costs. The Cisco ASA features a flexible 8-port Fast Ethernet switch whose ports can be dynamically grouped to create up to three separate VLANs for home, business, and Internet traffic for improved network segmentation and security. The Cisco ASA provides two Power over Ethernet (PoE) ports, simplifying the deployment of Cisco IP phones with zero-touch secure voice over IP (VoIP) capabilities, as well as the deployment of external wireless access points for extended network mobility. A high-performance intrusion prevention and worm mitigation service is available with the addition of the Advanced Inspection and Prevention Security Services Card (AIP SSC). Multiple USB ports can be used to enable additional services and capabilities as they are needed. As business needs grow, customers can install a Security Plus upgrade license, enabling the Cisco ASA to scale to support a higher connection capacity and up to 25 IPsec VPN users, add full DMZ support, and integrate into switched network environments through VLAN trunking support. Furthermore, this upgrade license maximizes business continuity by enabling support for redundant ISP connections and stateless Active/Standby high-availability services. Businesses can also extend the Cisco ASA firewall’s VPN service by enabling Cisco AnyConnect client and clientless VPN remote access to support various mobile workers and business partners. Cisco Secure Remote Access Solution deployments can scale to serve up to 25 AnyConnect and/or clientless VPN concurrent users on each Cisco ASA by installing an Essential or a Premium AnyConnect VPN license. This combination of market-leading security and VPN services, advanced networking features, flexible remote management capabilities, and future extensibility makes the Cisco ASA an excellent choice for businesses requiring a best-in-class small business, branch, or enterprise teleworker security solution. DHA Phasse 1 karachi

Cisco 7912 Unified Voip Phone Large Pixel-based display - gives access to features. 4 dynamic soft keys - Changeable calling options for the user to scroll through. Menu key - This key allows users to quickly access information such as call logs and phone settings. Hold key - visual indicatior that a call was placed on hold. Support of a single line or directory number Support of Extension Mobility Call monitor (speaker only, no microphone) Messages key - access to voicemail messages Four speed dials configurable at the Cisco Unified CallManager Cisco Discovery Protocol Differentiated Services Code Point (DSCP) tagging G.711a, G.711u, and G.729ab audiocompression coders-decoders (codecs) Integrated Ethernet switch 10/100BASE-T Ethernet connection through an RJ-45 interface for LAN connectivity Software upgrade supported using a Trivial File Transfer Protocol (TFTP) server Provisioning of network parameters through Dynamic Host Configuration Protocol (DHCP) Voice activity detection, silence suppression, comfort-noise generation, and error concealment Compatible with Cisco Unified CallManager Version 3.3(2) and later, using the Skinny Client Control Protocol (SCCP) protocol as well as SIP (RFC 2543)

Cisco Catalyst TT WS-CTT-L Cisco Catalyst -C and -S switches support voice, video, data, and highly secure access. They also deliver scalable management as your business needs change. The Common Features are included Enhanced security including Cisco TrustSec for providing authentication, access control, and security policy administration, Multiple Fast or Gigabit Ethernet performance options, Cisco EnergyWise for power management, Scalable network management. Forty-eight Ethernet ports and two TX uplinks 1 RU, fixed-configuration switch Entry-level enterprise class intelligent services LAN Base image installed Box Pack- Warranty: 1 Year

Cisco Catalyst TC WS-CTC-L Cisco Catalyst -C and -S switches support voice, video, data, and highly secure access. They also deliver scalable management as your business needs change. The Common Features are included Enhanced security including Cisco TrustSec for providing authentication, access control, and security policy administration, Multiple Fast or Gigabit Ethernet performance options, Cisco EnergyWise for power management, Scalable network management. Twenty-four Ethernet ports and two dual-purpose uplinks BASE-T or Small Form-Factor Pluggable SFP 1 RU, fixed-configuration switch Entry-level enterprise-class intelligent services LAN Base Image Installed Box Pack- Warranty: 1 Year

Cisco Aironet 5500 Managed Gigabit Ethernet Wireless LAN Controller 8 Port AIR-CT5508-100-K9 KEY FEATURES- Cisco 8-Port Aironet 5508 wireless controller provides uninterrupted network access when roaming and supports all Cisco unified communications wireless IP phones. 8-ports 101001000Base-T gigabit Ethernet Managed switch Connectivity technology Wired Capacity Manageable access points 100, Status indicators link activity, power, system Data link protocol Gigabit Ethernet, switching protocol Ethernet Networktransport protocol TCPIP, UDPIP, ICMPIP, ARP, BOOTP, DHCP, remote management protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH

Cisco Catalyst 3560 V2 Series switch WS-C3560V2-48PS-S is the next-generation energy-efficient Layer 3 fast Ethernet switches. This 3560V2 switch supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560V2 Series switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.  The main feature of these switches are Layer 3 switching, auto-sensing per device, DHCP support, auto-negotiation, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), MAC address filtering, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR). Website http://www.itlink.pk/

Cisco WAPN Wireless-N Access Point - PoE/Advanced Security Advanced security capabilities like support for WEP and WPA protocols, rogue AP detection, MAC-based access control, and x authentication

Cisco Aironet AG-NK9 Wireless Access Point - 54Mbps-(4 Antenas) - Australian Imported Specifications: Device Type: Wireless access point Network Port: 1 x (RJ-45) Fast Ethernet Data Transfer Rate: 54 Mbps Data Link Protocol: IEEE b, IEEE a, IEEE g Features: HTTP, EAP, TKIP, PEAP, TFTP, FTP, SNMP Antenas: 2 x 5GHz + 2 x 2.4GHz Pick up/Delivery: We can ship by cargo next day delivery. Please call for bank details, upon verifying payment we will ship via a cargo for next day traceable delivery. Delivery charges you will pay at your end. (Delivery Cost around Rs in case you are not in Lahore or you don't like to come to pick up the item). Contact Us:

Cisco AIR-AP1832I-E-K9C Aironet Wireless Access Point  Specifications Device Type Radio access point Form Factor External - indoor Localisation Belgium, Bahrain, Lebanon, Oman, Saudi Arabia, United Arab Emirates, Bulgaria, Czech Republic, Estonia, Lithuania, South Africa, Iceland, Romania, Sri Lanka, Luxembourg, Hungary, Cyprus, Iraq, Ghana, Kenya, Nigeria, Liechtenstein, Gibraltar, Malta, Monaco, Croatia, Slovakia, Slovenia, Latvia, Libya, Austria, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, United Kingdom, Greece, Turkey, Ireland, Serbia, Montenegro, Bosnia and Herzegovina RAM GB 1 Flash Memory 256 MB Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0) Frequency Band 2.4 GHz, 5 GHz Power Over Ethernet (PoE) Supported PoE+ Power AC 120/230 V (50 - 60 Hz) Dimensions (WxDxH) 21.08 cm x 21.08 cm x 50.8 cm Weight 1.41 kg

Cisco Modular Access Router, Rs. Key feature Port Speed Connectivity Wired Remote Management Protocols SNMP, Telnet Condition: - No Warranty

Access point imported from USA Brand new orignal snaps are attached. only serious buyer contact no sms just call

Overview: The WS-CG-24-EI Cisco Catalyst G-24 is a member of the Catalyst Series Intelligent Ethernet Switches, and is a fixed-configuration, stackable switch that provides wire-speed Fast Ethernet and Gigabit Ethernet connectivity for midsized networks and the metro access edge. The Catalyst Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), to the network edgewhile maintaining the simplicity of traditional LAN switching. When a Catalyst Switch is combined with a Catalyst Series Switch, the solution can enable IP routing from the edge to the core of the network. Embedded in Catalyst Series switches is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Catalyst desktop switches using a standard Web browser. In addition, Cisco CMS Software provides new configuration wizards that greatly simplify the implementation of converged applications and network-wide services. Specifications: Benefits: ports and two fixed GBIC-based BASE-X uplink ports 1 rack unit (RU) stackable switch Delivers intelligent services to the network edge Enhanced Software Image (EI) installed Ideal for advanced desktop access layer connectivity and residential metro access Cisco Catalyst® G-24 is a member of the Catalyst Series Intelligent Ethernet Switches, and is a fixed-configuration, stackable switch that provides wire-speed Fast Ethernet and Gigabit Ethernet connectivity for midsized networks and the metro access edge. The Catalyst Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), to the network edge while maintaining the simplicity of traditional LAN switching. When a Catalyst Switch is combined with a Catalyst Series Switch, the solution can enable IP routing from the edge to the core of the network. Available for the Catalyst Series, the is a free centralized management application that simplifies the administration task of Cisco switches, routers, and wireless access point. Cisco Network Assistant offers user-friendly GUI interface to easily configure, troubleshoot, and enable and monitor the network Contact: SA Computer SHOP# ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell: Ptcl# (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region........... Pray For Us.... Condition: - Warranty: 1 Months

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash

  Description The Cisco Catalyst 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video. Product Features Redundant power system The Cisco Catalyst 3560 v2 Series access switches support the generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. Ease of use and deployment The Cisco Catalyst 3560 v2 series offers several ease of use features, which enable fast and easy configuration of advanced Cisco Catalyst capabilities. Enhanced security With the wide range of security features, such as ACLs, authentication, port-level security, and identity based network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. switch. Product Details Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable 1U Interfaces Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH) 44.3 cm x 29.5 cm x 4.4 cm Weight 3.7 kg Manufacturer Warranty Limited lifetime warranty Show Detailed Specification Show Detailed Specification General Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable - 1U Subtype Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption Algorithm SSL Authentication Method Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) Features Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), Per-VLAN Spanning Tree Plus (PVST+) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Flash Memory 32 MB Flash Status Indicators Link activity, port duplex mode, bandwidth utilization %, power, link OK, system Expansion / Connectivity Interfaces 24 x 100Base-TX - RJ-45 1 x console - RJ-45 - management 2 x Ethernet 1000 - SFP (mini-GBIC) Power Contact: SA Computer SHOP# 61,62,73,74,77 1ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell:03454113314 Ptcl# 04237353809 (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region........... Remember Us In Ur Pray....

The Cisco Catalyst Series switches is a line of fixed configuration, enterprise-class, IEEE af and Cisco prestandard Power over Ethernet (PoE) switches that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. Cisco WS-CG-24TS-S Catalyst Switch, 24 Ethernet ports & 4 SFP-based Gigabit Ethernet ports Manufacturer: Cisco Price: /- Contact: Condition: - No Warranty

The Cisco Catalyst Series switches is a line of fixed configuration, enterprise-class, IEEE af and Cisco prestandard Power over Ethernet (PoE) switches that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. Cisco WS-CG-24TS-S Catalyst Switch, 24 Ethernet ports & 4 SFP-based Gigabit Ethernet ports Manufacturer: Cisco Price: /- Contact:

Description: Details iShopping.pk brings you the best price for Cisco Wireless-N Access Point With Single Point Setup (WAP121-E-K9-G5) with 1 year official warranty and express shipping all over Pakistan   Features: • Compatible with Cisco Small Business Gigabit Power over Ethernet Injector •  Provides affordable, high-bandwidth wireless-N connectivity for demanding applications •  Features Fast Ethernet LAN ports to help enable quicker downloads for large files •  Offers flexible installation options and attractive design with internal antennas •  Makes configuration simple with Single Point Setup controllerless multi-access point deployment and management technology   Specifications: Interfaces 10/100 BASE-T autosensing (RJ45) Powering Options 802.3af Ethernet Switch, Cisco SB-PWR-INJ-12V-xx power Injector or Local Power Supply (SB-PWR-12V-xx) Frequency Single-band 2.4GHz Wireless 802.11n, 2x2 multiple input multiple output (MIMO) Operating modes Access Point mode, WDS bridging, Client Bridge mode VLAN support Yes Number of VLANs 1 management VLAN plus 4 VLANs for SSID Multiple SSIDs 4 802.1X supplicant Yes SSID to VLAN mapping Yes Auto channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes Layer 2 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN Access control Yes, management access control list (ACL) plus MAC ACL Rogue access point detection Yes Quality of service (QoS) Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) Maximum AP’s per cluster 4 Active clients per cluster 40 Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour HTTP redirect Yes Wireless isolation Wireless isolation between clients Roaming Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save

The Cisco Catalyst Series switches is a line of fixed configuration, enterprise-class, IEEE af and Cisco prestandard Power over Ethernet (PoE) switches that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. Catalyst Switch, 24 Ethernet ports & 2 SFP-based Gigabit ports Manufacturer: Cisco Condition: 9/10 - No Warranty

The Cisco Catalyst Series switches is a line of fixed configuration, enterprise-class, IEEE af and Cisco prestandard Power over Ethernet (PoE) switches that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. Catalyst Switch, 24 Ethernet ports & 2 SFP-based Gigabit ports Manufacturer: Cisco Condition: - No Warranty

CiscoWorks Wireless LAN Solution Engine WLSE manages Cisco Aironet access points operating autonomously and Cisco wireless bridges. CiscoWorks WLSE can centrally manage hundreds to thousands of Cisco Aironet access points for medium-sized to large enterprises and wireless vertical markets. CiscoWorks WLSE helps to simplify and automate the deployment and security of WLANs, to ensure their smooth operation and dependability. CiscoWorks WLSE also provides WLAN Intrusion Detection System IDS capabilities for detecting WLAN intrusions such as rogue access points, ad-hoc networks, and excess management frames on the air that typically signal a WLAN attack. Condition: - Warranty: 1 Year

CiscoWorks Wireless LAN Solution Engine WLSE manages Cisco Aironet access points operating autonomously and Cisco wireless bridges. CiscoWorks WLSE can centrally manage hundreds to thousands of Cisco Aironet access points for medium-sized to large enterprises and wireless vertical markets. CiscoWorks WLSE helps to simplify and automate the deployment and security of WLANs, to ensure their smooth operation and dependability. CiscoWorks WLSE also provides WLAN Intrusion Detection System IDS capabilities for detecting WLAN intrusions such as rogue access points, ad-hoc networks, and excess management frames on the air that typically signal a WLAN attack.

WS- C2960-24TT-L is one of the Cisco Catalyst 2960 Series switches. Cisco Catalyst 2960 Series switches support voice, video, data, and highly secure access. They also deliver scalable management as your business needs change. The Common Features are enhanced security including Cisco TrustSec for providing authentication, access control, and security policy administration, Multiple Fast or Gigabit Ethernet performance options, Cisco EnergyWise for power management, Scalable network management. It provide efficient and cost-effective network connectivity for branch offices or small and medium-sized businesses. These secure entry-level enterprise-class Fast Ethernet switches support basic Cisco Borderless Networks services. Website http://www.itlink.pk/

Features and Benefits: Reduces deployment and operating expenses Simplifies daily operation and management of small to large-scale autonomous Cisco Aironet WLANs Enhances network security: Detects, locates, and mitigates rogue access points and unauthorized ad-hoc networks Helps ensure the consistent application of security policies Improves WLAN performance and availability: Detects RF interference Optimizes radio coverage and settings Monitors performance and faults Saves time and resources: Automating the configuration of Cisco Aironet access points and bridges Assisted site survey to determine optimal antenna selection and access point settings such as transmit power and channel selection Condition: - No Warranty

Features and Benefits: Reduces deployment and operating expenses Simplifies daily operation and management of small to large-scale autonomous Cisco Aironet WLANs Enhances network security: Detects, locates, and mitigates rogue access points and unauthorized ad-hoc networks Helps ensure the consistent application of security policies Improves WLAN performance and availability: Detects RF interference Optimizes radio coverage and settings Monitors performance and faults Saves time and resources: Automating the configuration of Cisco Aironet access points and bridges Assisted site survey to determine optimal antenna selection and access point settings such as transmit power and channel selection