9v battery

9 Volt Battery Clip Red Wire: +Ve Black Wire: -Ve Wire Length 6 inch

Battery Features: Backup: 10 hrs Output Voltage Main: 3V, 5V, 6V, 9V, 12V, 16V, 19V Output Voltage USB port: 5V Output Current (Max): 6A Charging Time: 6-6.5 Hours Dimensions: 8.93x4.84x.87(in) Weight: 610 gram Compatibility: Mac, Sony, IBM, Dell etc. as well as all devices which require a 3V~28V power supply. iPod, PSP, MP3, MP4, DC, DV, PDA, Cell Phone, Digital Camera, CPAP device, Laptop, etc.. Box Pack- Warranty: 6 Months

Manage the constant current to constant voltage charging of a connected lithium battery Over-discharge protection - keeps your battery from being discharged below 2.4V, a healthy minimum voltage level for your batteryIf a connected battery has been discharged below 2.4V the module will cut output power from the battery until the battery voltage has been re-charged above 3.0V (the over-discharge release voltage), which at that time the module will again allow discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows charging of the battery to occur through the parasitic diode of the discharge control MOSFET (FS8205A Dual MOSFET). Overcharge protection - the module will safely charge your battery to 4.2V Overcurrent and short-circuit protection - the module will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs Soft-start protection limits inrush current Trickle charge (battery reconditioning) - if the voltage level of the connected battery is less than 2.9V, the module will use a trickle charge current of 130mA until the battery voltage reaches 2.9V, at which point the charge current will be linearly increased to the configured charge current.

12v 7.2A dry battery with two stage charger, constant volts & constant current which will protect your battery from damage hence long battery life. You can run 12v DSL router & 9v DSL router 4-5 hours in loadshedding & you can attach this charger with battery for 24 hours so your DSL internet connection will not lost. Yes u can use your battery for other purposes like LEDs, fans etc.... u can also SMS to ask, If u need only charger then I can provide without battery Rs. Box Open - Never Used- Warranty: 2 Months

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address: Box Pack- Warranty: 1 Year

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address:

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Box Pack- Warranty: 1 Year

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

  Brand: fangpusun Product Code: PR 3030 Availability: In Stock Price: Rs.8,000/- The Fangpusun PR 10-30 series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR 1010 PR1515 PR2020 PR3030 Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞50%/12.6V(25.2V) Deep discharge protection(SOC/LVD) ＜30%/11.1V(22.2V) Operating conditions Ambient temperature -10℃…+50℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

Hello Friends, Qi-infinity 35,000mAh multi-Function External Battery COLOUR: Black Rs.20,000 Fixed The sleek, stylish aesthetic matches the current generation of portable electronic devices, making it a natural accessory to your tablet. This package includes everything you need to keep your devices fully powered when you’re on-the-go. Charge your Surface Pro 3, 4, Surface Book & other electronic devices on long flights, trains, road trips and more! This external battery is specially designed with 12V and 15V DC output for the MS Windows Surface Pro 3, Pro 4, and Surface Book. It also features 3 USB ports that support 5V, 3A and 1 Quick Charging USB port 9V/12V. The Qi-infinity external power bank features a modern, stylish design that is compact for easy portability.  Have the kids play their favorite games, read your favorite e-books, work online on your business, communicate, stay updated in social media, and basically do anything anywhere. CONTACT: Hussain Abbas ADDRESS: Shop No - F10/3, Opp Punjab Chowrangi, Near Dental Altamash Medical Institute, Clifton, Karachi NOTE: 1) Goods once sold will not be returned or changed. 2) Our rate fluctuates as it depends on shipment rate.

Enjoy Internet during load shedding Wifi UPS can power broadband modems & PTC wifi routers up to 8 hours when fully charged. 1-No disconnection on switching (Live Backup) 2-Dry Battery Included 3-Can operate up to 2 devices ( mA each) 4-Compact & Simple device. Easy to install 5-No power adapter required. 12V & 9V options installed. Backup Time Price 5 Hours PKR Hours PKR Delivery Charges Rs 200 anywhere in LAHORE Rs 600 anywhere in PAKISTAN Buy 2 & Get 5% Discount لوڈ شیڈنگ کے دوران انٹرنیٹ استعمال کرنے کے لیے وائی فائی یو پی ایس کم قیمت میں اعلٰی قوالٹی پراڈکٹ ہے۔ ہہ آپ کے پی ٹی سی ایل یا کسی بھی دوسرے راوٗٹر کے ساتھ اٹیچ ہو جاتا ہے۔ اعلٰی قوالٹی کی بیٹری پیکج کا حصہ ہے۔ Box Pack - No Warranty

Enjoy Internet during load shedding Wifi UPS can power broadband modems & PTC wifi routers up to 8 hours when fully charged. 1-No disconnection on switching (Live Backup) 2-Dry Battery Included 3-Can operate up to 2 devices ( mA each) 4-Compact & Simple device. Easy to install 5-No power adapter required. 12V & 9V options installed. Backup Time Price 5 Hours PKR Hours PKR Delivery Charges Rs 200 anywhere in LAHORE Rs 600 anywhere in PAKISTAN Buy 2 & Get 5% Discount Box Pack - No Warranty

WE DEAL IN ALL ENERGIZER BATTERY CELLS. SUCH AS C,D,9V,AA,AAA,AAA,N2,RECHARGEABLE,CHARGERS Box Pack - No Warranty

Material: ABS housing - Frequency: - Full control: forward / backward / turn left / turn right / stop - Control range: 15 meters - Speed: 7 kilometer/hour - Car: Powered by 4 x AA batteries (not included) - Controller: Powered by 1 x 9V/6F22 batteries (not included) - Great gift for children Dimensions: 8.50 in x 3.94 in x 2.48 in (21.6 cm x 10.0 cm x 6.3 cm) Weight: 8.11 oz (230 g)" Box Pack - No Warranty

Material: ABS housing - Frequency: - Full control: forward / backward / turn left / turn right / stop - Control range: 15 meters - Speed: 7 kilometer/hour - Car: Powered by 4 x AA batteries (not included) - Controller: Powered by 1 x 9V/6F22 batteries (not included) - Great gift for children Dimensions: 8.50 in x 3.94 in x 2.48 in (21.6 cm x 10.0 cm x 6.3 cm) Weight: 8.11 oz (230 g) Box Open - Never Used - No Warranty

Material: ABS housing Frequency: Full control: forward / backward / turn left / turn right / stop Control range: 15 meters Speed: 7 kilometer/hour Car: Powered by 4 x AA batteries not included Controller: Powered by 1 x 9V/6F22 batteries not included Great gift for children Dimensions: 8.50 in x 3.94 in x 2.48 in Weight: 8.11 oz 230 g" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Material: ABS housing Frequency: Full control: forward / backward / turn left / turn right / stop Control range: 15 meters Speed: 7 kilometer/hour Car: Powered by 4 x AA batteries not included Controller: Powered by 1 x 9V/6F22 batteries not included Great gift for children Dimensions: 8.50 in x 3.94 in x 2.48 in Weight: 8.11 oz 230 g" Facebook page;ElectronicsArena.com

Material: ABS housing Frequency: Full control: forward / backward / turn left / turn right / stop Control range: 15 meters Speed: 7 kilometer/hour Car: Powered by 4 x AA batteries not included Controller: Powered by 1 x 9V/6F22 batteries not included Great gift for children Dimensions: 8.50 in x 3.94 in x 2.48 in Weight: 8.11 oz 230 g" Box Pack - No Warranty

material: abs housing frequency: full control: forward backward turn left turn right stop control range: 15 meters speed: 7 kilometer hour car: powered by 4 x aa batteries not included controller: powered by 1 x 9v 6f22 batteries not included great gift for children dimensions: 8.50 in x 3.94 in x 2.48 in 21.6 cm x 10.0 cm x 6.3 cm weight: 8.11 oz 230 g " Box Pack - No Warranty

  Enjoy Internet during load shedding Wifi UPS can power broadband modems & PTC wifi routers up to 8 hours when fully charged. 1-No disconnection on switching (Live Backup) 2-Battery Included 3-Can operate up to 2 devices (1000 mA each) 4-Compact & Simple device. Easy to install 5-No power adapter required. 12V & 9V options installed. Backup Time Price 5 Hours PKR 2950 7 Hours PKR 3450 Delivery Charges Rs 200 anywhere in LAHORE

Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121g. Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121gWith just two parts your Arduino goes portable, powered by a 9V battery. Note that these connections are the same ones you'd use to make a plug to connect to a solar cell array, a car lighter plug or a larger battery. You'll need a 9V battery clip (snap connector), a 2.1mm power plug, a soldering iron and some solder, and optionally a small piece of heat shrink tubing." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121g. Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121gWith just two parts your Arduino goes portable, powered by a 9V battery. Note that these connections are the same ones you'd use to make a plug to connect to a solar cell array, a car lighter plug or a larger battery. You'll need a 9V battery clip (snap connector), a 2.1mm power plug, a soldering iron and some solder, and optionally a small piece of heat shrink tubing." Facebook page;ElectronicsArena.com

Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121g. Input: 100V - 240V AC, Hz 0.5A Output: 9V DC mA Weight: 121gWith just two parts your Arduino goes portable, powered by a 9V battery. Note that these connections are the same ones you'd use to make a plug to connect to a solar cell array, a car lighter plug or a larger battery. You'll need a 9V battery clip (snap connector), a 2.1mm power plug, a soldering iron and some solder, and optionally a small piece of heat shrink tubing." Box Pack - No Warranty

AMPLIFIER PROBE (180 CB-A) -The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation -Works with any Tone Generator to identify wires -Volume control for increased sensitivity and adjustable to suit work enviornment -Recessed ON/OFF button prevents battery drain -Power supply is from any 9V battery with a life of approximately 100 hours -A plug receptacle is designed for head set or hand set -AMPLIFIER PROBE (180 CB-G) -Tone Generator is a great tool for locating and identifying cable pairs or individual conductors -Besides providing tone generator, tone generator serves as a continuity and polarity tester -Test results are displayed by a three-colored led Box Pack- Warranty: 1 Year

This a solderless breadboard with two dual power rails and 830 points in total. There are 630 points and 200 for the power rails. Theres two rows of power rails on each side that allows you to have different voltages on each rail. For example, 5v and ground on one side and 3.3v and ground on the other side. The breadboard has a sticky pad on the back, to stick to any surface so the board does not move. You can connect multiple breadboards horizontally. Our power supply module with this breadboard is perfect to add extra power to your projects. You can also connect a 9v battery into the power supply with our battery clip not included. Specifications Points 830 630 200 4 independent power rails two each side

Lovibond CW Pocket Colorimeter SPECIFICATIONS Measuring range 0 - 6mg/l free and total Resolution 0.01mg/l Optics Temperature compensated LED (528nm) Data collection 10 point internal memory with real time clock Display Backlit LCD Environmental conditions 0 - 40°C, % RH Dimensions 45 x 65 x 160mm(hxwxd) Housing Waterproof Power supply 9V battery Supplied with reagents for 20 Total Chlorine Tests and 10 Free Chlorine Tests (DPD Tablets)

This Mega learning kit includes many items, details of the each part is given bellow. Package Included 1 X UNO Board 1 X USB Cable 1 X Jump Cable 1 X Breadboard 5 X LED Light 1 Pack Resistor 1 X Female to male dupond line 1 X Potentiometer 1 X Buzzer 1 X 74HC595 1 X Infrared receiver 1 X LM35 1 X Flame Sensor 1 X Ball Switch 1 X Photoresistor 1 X Key button 1 X Remote control 1 X 4-digit display tube 1 X 88 Dot matrix module 1 X 1-digit display tube 1 X Stepper motor driver board 1 X Stepper motor 1 X 9g Servo 1 X IIC 1602 LCD 1 X XY joystick module 1 X Temperature module 1 X Water test module 1 X RFID Module 1 X RFID keychain 1 X RFID White card 1 X Sound Module 1 X Relay Module 1 X Clock Module 1 X 44 Key board 1 X RGB 3 color module 1 X 9V battery Snap

PowerCore Select 20000mAH Ultra High-Capacity Portable Battery   From Anker, America’s Leading Charging Brand • Faster and safer charging with our advanced technology • 30 million+ happy users and counting 2 USB-A Ports Dual charging ports with Anker’s PowerIQ high-speed charging technology charge two devices at the same time Light and Portable Weighing less than a pound, PowerCore Select 20000 is designed for on-the-go. Worry-Free Warranty At Anker, we believe in our products. That’s why we back them all with an 18-month warranty and provide friendly, easy-to-reach support. Specs Recharging time: 6.5 hours (with USB-A to Micro-USB cable, and 9V/2A AC charger) Micro-USB Input: 5V = 2.2A, 9V = 2A Single Port Output: 5V = 3A, 9V = 2A, 12V = 1.5A Dual Port Output: 5V = 3A Max Total Power Output:  18W Notes – USB-C cable, Lightning cable, and AC adapter not included. – Compatible with most USB-charged devices, including iPhone 8 / X / XS / XS Max / XR (Lightning cable required), Android smartphones and tablets (including the Nexus 7)