12v battery charging circuit control board

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address: Box Pack- Warranty: 1 Year

fangpusun Charge Controller 30A For UPS & Battery Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Websites: www.solutionsinn.com.pk www.solutionsinn.net www.facebook.com/solutionsinn E-mail Address:

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan. Box Pack- Warranty: 1 Year

Brand: fangpusun Product Code: PR Availability: In Stock Price: Rs./- The Fangpusun PR series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR PR PR PR Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞V(25.2V) Deep discharge protection(SOC/LVD) ＜V(22.2V) Operating conditions Ambient temperature -℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

  Brand: fangpusun Product Code: PR 3030 Availability: In Stock Price: Rs.8,000/- The Fangpusun PR 10-30 series of charge controllers is the highlight in the range. The lates charging technologies, combined with a Fangpusun AtonIC state of charge determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user. Product features: Hybrid controller State of charge determination with Fangpusun AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive grounding or negative grounding on one terminal Integrated self test Night light function Integrated self test Monthly maintenance charge Electronic protection functions: Electronic protection functions Over charge protection Deep discharge protection Reverse polarity protection of load, module and battery Automatic electronic fuse Short circuit protection at module input Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Over temperature and overload protection Battery overvoltage shutdown Displays Graphical LCD display For operating parameters, fault messages, self test Operation Simple menu-driven operation Programming by buttons Manual load switch Options Prepayment interface External temperature sensor Alarm contact Certificates Approved by the World Bank for Nepal Compliant with European Standards (CE) ROHS compliant Made in china PR 1010 PR1515 PR2020 PR3030 Characterisation of the operating performance System voltage 12V(24V) Own consumption 12mA DC input side Open circuit voltage solar module ＜47V Module current 10A 15A 20A 30A DC output side Load current 10A 15A 20A 30A End of charge voltage liquid 13.9V(27.8V) gel 14.1V(28.2V) Boost charge voltage 14.4V(28.8V) Equalisation charge 14.7v(29.4v) Reconnection voltage(SOC/LVR) ＞50%/12.6V(25.2V) Deep discharge protection(SOC/LVD) ＜30%/11.1V(22.2V) Operating conditions Ambient temperature -10℃…+50℃ Fitting and construction Terminal(fine/single wire) 16m㎡/25m㎡-AWG6/4 Degree of protection IP 32 Dimension(X x Y x Z) 187X95X44mm Weight 350g Company Name: Solutions Inn Regards, Engr. Ali Shan Head Office: 85-B, Lalazar, Judicial Colony (Near Cakes & Bakes), Raiwind Road, Lahore, Pakistan.

20A 12V 24V EP MPPT Solar Charge Controller Remote Meter is optional. Features of product: V auto recognition, 10A rated charging current. 2. Advanced maximum power point tracking technology to optimize using the solar system. 3. Widely used, automatic recognize day/night. 4. Timer function with 1-15 hours option for street light 5. Two load outputs. Each load can be individually controlled, and enhance the flexibility of the system. 6. Sealed, Gel and Flooded battery option. 7. Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime. 8. Electronic protection: Over charging, over discharging, overload, short circuit, and reverse polarity of both solar module(s) and battery. 9. RJ45 interface with remote meter MT-2, convenient to check operating parameters of controllers. The TRACER series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm inside that maximizes the energy from the solar PV module and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery damage from battery over discharging. The TRACER controller charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the TRACER controller has a RJ45 interface to allow communication with a meter for remote monitoring. Although the TRACER controller is very simple to configure and use, please take your time to read the operator’s manual and become familiar with the controller. This will help you make full use of all the functions and improve your solar PV system. Box Open - Never Used - No Warranty