ELECTRONIC HALOGEN GAS LEAK DETECTOR WJL - 6000 AIR IN LAHORE

Performance indicators:   Working temperature: 0  ~ 52    Maximum sensitivity: the halogen refrigerants, 6 gr/yr   About 50 hours of battery life: under normal use   Response time: the instantaneous   Approach: unlimited   Sheath maerial length: 20 cm   Feet inches, 22.9 cm x 6.5 cm x 6.5 cm   Preheat time: about 6 seconds   Reset time: 2 to 10 seconds   Power source: 6 volt dc, no. 4 pcs7 high quality batteries  Test all contain halogen refrigerants;   Sensitivity adjustment at any time, the instrument can automatically adjust to the best testing status; Built-in high    precision voltage regulator IC, and USES the ultra low power design, make the work more stable, more durable    battery;   Battery voltage three color instructions;   High quality sensors, the work is high sensitivity, longer service life   The battery voltage indicator:   The light on the front panel is used for leakage warning instructions and battery voltage.   Green - the battery voltage is normal, suitable for the job   Orange - the battery voltage is close to the limit work, need to be replaced as soon as possible     Boot automatically reset/follow the circuit:   WJL - 6000 is a boot) and automatic reset function, halogen gas levels can ignore the environment.   Boot reset: the instrument after startup, can automatically adjust circuit within 6 s to ignore probe existing   Refrigerant concentration level, the state of detection, users such as beside the leakage source boot, party   Seeking higher concentration of leakage source. Instrument can also be moved to clean up in the air, with    adjustable   Whole to maximum sensitivity, the above zero concentration level of leakage can be detected.   Automatic follow circuit: when the instrument is in a state detection, automatic circuit will follow halide in the    environment   The change of gas concentration, to prevent false alarm.   Sensitivity to adjust:   This product has the function of stepless adjusting sensitivity can be adjusted at any time when testing.   Leakage warning:   When the leaking gas is found out, "di di" sound will become urgent, leakage, the more "click" sound, the more    urgent. Indicator lights flash at the same time.