CAB XC4 THE GHS LABEL PRINTERS FOR TWO COLOR PRINTING IN PAKISTAN

Two in-line arranged thermal transfer print units for simultaneous two-color printing in one label. With ribbon saver at one print unit.

The XC series meets the conditions for the classification and labeling inventory according to GHS.
For large label rolls up to 300 mm diameter
The two print units including ribbon holder, operation panel and electronics are adopted from the proven A+ series

Cutter
Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes.

Perforation cutter
For XC4 printers only. Enables the perforation of the material for later manual separation.

Stacker with cutter
For XC4 printers only. Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities.

Functions

1. Wide graphic display
White backlight for optimum readability.

2. Ribbon holder
Simple, centered insertion of the ribbon with three-part tightening axles.

3. Simple adjustment
The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin.

4. Peripheral connection
All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw.

5. Solid metal housing
Die-cast aluminum. All components are mounted on it.

6. Roll holder
For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension.

7. Ribbon saver for printhead 1
The ribbon saver is used for labels to be partially printed. The print head is lifted within the unprinted area and the ribbon stopped during label feeding.

8. Fanfold guide
Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.