BEHRINGER B-1 IN KARACHI

Behringer B-1 - Single Diaphragm Studio Condenser Microphone Overview The B-1 Gold-Sputtered Large-Diaphragm Studio Condenser Microphone from Behringer features a large diaphragm condenser design and can be used for project and professional studio applications. It offers a pressure gradient capsule that delivers a transparent 20 Hz to 20 kHz frequency response while handling an SPL rating of 138 dB (148 dB with pad), resulting in clean transparent audio at transient peak levels. The B-1 features a cardioid polar pattern, minimizing off-axis audio and noise caused by room ambiance and additional instruments. A -10 dB pad switch provides headroom when recording loud signals that can distort on input, and a low-frequency roll-off switch minimizes low-end noise at 75 Hz (6 dB / Octave). The microphone includes a shockmount, windscreen, and carrying case. Cardioid Polar Pattern The B-1 features a cardioid polar pattern, minimizing off-axis signal and noise caused by room ambiance, monitors, noise, and additional instruments. High-Pass Filter Switch A high-pass filter switch eliminates low frequencies at 75 Hz (6 dB / Octave). This is useful when ambient hum or line noise is prevalent. -10 dB Pad Switch The B-1 is capable of handling Sound Pressure Levels of up to 135 dB and a -10 dB pad switch allows for a total of 148 dB of headroom. Behringer B-1 Specs Analog Performance Operating Principle Pressure Gradient Transducer Condenser Diaphragm 1.0" / 25.40 mm Polar Pattern Cardioid Frequency Range 20 Hz to 20 kHz Signal to Noise Ratio 81 dB A-Weighted Equivalent Noise Level 13 dB A-Weighted Maximum SPL 138 dB SPL Pad -10 dB THD 1% Impedance 50 Ohms Load Impedance 1000 Ohms Sensitivity 20 mV/Pa Low-Cut Filter 6 dB/Octave @ 75 Hz General Output Connectors 1 x 3-Pin XLR Operating Current Consumption 3.0 µA Operating Voltage 48 V Length 6.85" / 174.0 mm Diameter 2.28" / 58.0 mm Weight 1.02 lb / 0.461 kg Packaging Info Package Weight 4.9 lb Box Dimensions (LxWxH) 13.2 x 9.6 x 4.5" Views: 6