Usb input

Deliver all over Pakistan This Conversion Box Turns The USB Port Of Your Pc Into An HDMI Output. It Can Be Used To Extent Your Display Using Your Computer’s USB Port Instead Of The Graphic Card’s HDMI Port. It Maintains The Transmitted Resolution Rate. Key Features: 1) Supports HD/HQ Resolution Of Up To 1080p 2) Sleek Compact Designed Box Specifications: 1x USB Input 1x HDMI Output Package Includes: 1x USB To HDMI Conversion BOX Views: 5

USB Easy Capture Device in Pakistan USB Easy Capture Device in Pakistan Description EasyCAP02 USB2.0 DVR is the safety system of ideal design for homeofficeshop guard or baby care purpose users can do their own security by easy installation. It is the costeffective solution to replace commercial VCR tape recorder, which also supports stable digitize video record and easy manages the recorded data viaindex of date and time. Thats it, make your life more safety and easier. - 4 channels video input in one card, the maximum displayrecording rate is 25fps under PAL format, and 30fps under NTSC format. - 4 screen display modes are available.

USB 5V 5050 RGB LED Flexible Strip Light Kit for TV PC Laptop +USB 24Key Remote USB 5V 5050 RGB LED Flexible Strip Light Kit for TV PC Laptop +USB 24Key Remote Specifications: 1. LED Type: 5050 SMD 2. Color: RGB 3. LED quantity: 60leds / Meter 4. Protection class ：Non-Waterproof 5. Operating voltage: DC 5V 6. Viewing Angle: 120 ° 7. Operating temperature: -20 to 50 ° 24key IR Remote Controller: 1. Type: 24Key Remote Controller 2. Connection mode: Common Anode(+) 3. Input: 5-24V 4. Output: 5-24V (3x2A) 5. Working Temperature: -20°C-60°C 6. Remote controller battery 3V: 1xCR2025(Battery not included) Cash on Delivery available

T1eNlMXkxCXXaNg2jb_.jpgT2YDlqXf4aXXXXXXXX_!!.jpgT2QTlqXgpaXXXXXXXX_!!.jpgT2bnpqXfhaXXXXXXXX_.jpgT26_lqXfxaXXXXXXXX_.jpg 1.jpg Product Name: USB Warmer Material: Body solid ABS, plastic body 1 Products, beautifully designed, compact and easy to meet the modern home and office multi-faceted needs 2. Connected to the computer USB port, no other power, easy to install, no drivers, hot plug 3. A single on / off control, when the heater starts, a red LED indicator light 4. Room temperature can be coffee, tea, milk and other beverages to keep 35, limit of flat metal cup to prevent the pummeling 5. Base is ABS plastic, coasters for the alloy material, modern fashion, the appearance of new Technical parameters: 1. Rated Power: 2.5W 2. Standard USB interfaces, 5V input voltage 3. ABS base material for high temperature 4. Product temperature maintained at degrees 5. With switch and LED indicator USB Cup Heater in Pakistan Usb Cup Warmer in Pakistan Coffee Tea Warmer in Pakistan USB Cup Heater Usb Cup Warmer Keep Coffee Tea Warmer in Pakistan Bigbrand.pk offers a best Usb Cup Warmer price in Pakistan with free shipping in all the major cities of Pakistan, Usb Cup Warmer Price in Karachi, Lahore, Islamabad, Sialkot, Faisalabad, Peshawar, Hyderabad, Azad Kashmir, Quetta, Multan, Rawalpindi and many more cities. Order Now!! - Enjoy Online Shopping & Free Delivery Anywhere in pakistan erally finer & stubble free

T1eNlMXkxCXXaNg2jb_.jpgT2YDlqXf4aXXXXXXXX_!!.jpgT2QTlqXgpaXXXXXXXX_!!.jpgT2bnpqXfhaXXXXXXXX_.jpgT26_lqXfxaXXXXXXXX_.jpg 1.jpg Product Name: USB Warmer Material: Body solid ABS, plastic body 1 Products, beautifully designed, compact and easy to meet the modern home and office multi-faceted needs 2. Connected to the computer USB port, no other power, easy to install, no drivers, hot plug 3. A single on / off control, when the heater starts, a red LED indicator light 4. Room temperature can be coffee, tea, milk and other beverages to keep 35, limit of flat metal cup to prevent the pummeling 5. Base is ABS plastic, coasters for the alloy material, modern fashion, the appearance of new Technical parameters: 1. Rated Power: 2.5W 2. Standard USB interfaces, 5V input voltage 3. ABS base material for high temperature 4. Product temperature maintained at degrees 5. With switch and LED indicator USB Cup Heater in Pakistan Usb Cup Warmer in Pakistan Coffee Tea Warmer in Pakistan USB Cup Heater Usb Cup Warmer Keep Coffee Tea Warmer in Pakistan

1. 100% New. 2. LED indicators: Microphone-Mute Status, Activity 3. USB2.0 Full-Speed (12Mbps) Specification 4. USB Class Specification 1.1 5. USB Audio Device Class Specification 1.0. USB bus-powered, no external power required. 6. The USB 2.0 External 7.1-Channel Audio Sound Card Adapter. It can work with either desktop or laptop. And with the Xear 3D Sound Simulation 7.software, it extends stereo speaker or earphone to 7.1 channel environment, giving high-quality sound enjoyment. 8. Connectors: USB Type A, Stereo output jack, mono microphone input jack 9. Xear 3D virtual 7.1 channel sound simulation software for Windows XP / Vista is included 10.Functions keys: Microphone-Mute, Speaker-Mute, Volume-Up, and Volume-Down 11.Size: 57 x 25 x 12mm 12.Weight: 12g 13.System: Windows 2000/X P/Server 2003/ Vista, Linux, for Mac OS Package List: 1 x 7.1 Channel USB Sound Card Views: 2

Operations: 1.Press A,blue and red lights brighten in one time and blue light will be off after 3seconds, and thedevice will be standby mode. 2.Press B to take photo and store one photo 3.Press C, the red light will flash 3times and begin to record, press C again to stop recording and store the file. 4.Press D, the blue light and red light will flash 3 times and motion detection function is on. The blue ligh turns off after the bright, begin to record. Please press D to stop recording and the red light will be on at the same time. 5.Press A to turn off the device, the red light will be off after one time flash fastly. 6.When the power low, the device will be off automaticlly. The red light will flash slowly when the device is working with low power, store the files automaticlly and turn off. 7.Connect the device with PC via USB cable, preaa A to read files. 8.The device can be powered by power source, the battery will be full about 3hours later. The red light is on when the device is charging and off after full power. 9.Reset: Because of the wrong operation or any other unknown reasons,the device go die,please push the button to OFF and push it to ON again, to reset. 10.Open the device from computer, and create a new text file named "time. txt" in the root directory. Opening text file, according to the following format to input current date and time, such as: (Year. Month. Day.Hour. Minute.Seconds),save the file to finish setting. Store and play files: After recording, turn off the device, connect it with computer via USB,copy of delete the files into the computer to play. Or take off the TF card,read files by card-reader. Recommend: Media player/KM player Specifications: Pixels 5.0 Mega CMOS OV Video Resolution Video Format AVI FPS 30fps Video coding M-JEPG View Angle 120° Motion Detection Distance Direct 6 meters Low Illumination 1LUX Battery Capacity 280MA Recording Time About 80 mins Remote Control Distance 18m Recording Audio Area 40 square meters Power Consumption 150MA/3.7V Memory TF Card Max. 32GB Software Operation system comes with or mainstream video player software Data Transfer Interface USB Operation System /XP/Visat32 Charge Time About 4 hours Box Pack- Warranty: 6 Months

✅ EASY to OPERATE ✅ Simply connect your speaker with our device, immediately transform your speakers into a fashionable wireless Bluetooth speaker. Powered via USB port, no battery is needed. ✅ WIRELESS PLAY ✅ Removing troubles of wired connection, through the wireless connection and transmission, the user can enjoy a high fidelity music at any place indoor by wireless control. Turn your wired stereo system to wireless,perfect for home stereo and car stereo systems. ✅ PERFECTLY COMPATIBLE ✅ This product can be compatible with nearly 95% of mobile phone or computer on market. Support all iPhone, iPad, iTouch, Samsung, LG, and all kind of smart phones. Updated Bluetooth tech features high quality audio transmission,Transmit up to 33 feet away with line of sight; Better build quality than the generic ones, much tougher and last longer. ✅ WORKING MODE ✅ 3.5mm male to male auxiliary output, streaming music to your speaker wirelessly. Please note the USB is used for power supply only. To make it work, you need to connect the receiver with your speaker via 3.5mm aux cable. ✅ PORTABLE DESIGN ✅ Simply connect this Bluetooth audio receiver to the line or auxiliary input on the speaker and pair it with your Bluetooth device to enjoy the wireless music revolution. Mini size, the feature of portable can let you carry them to anywhere you want.

credit card accepted few days used for emergency we sell this 2usb 2hdmi vga FHD pc input home theater supported

Behringer C-1U USB Studio Condenser Mic A professional large-diaphragm condenser microphone with a built-in USB interface so you can record faster than ever in both live and studio applications. The Behringer C-1U USB mic is a digital home recording or podcasting enthusiast's dream. This professional quality condenser microphone is identical to the acclaimed Behringer C-1 mic with one awesome difference: it's has a built-in USB interface so you can be ready to record faster than ever and with minimal preparation and equipment. Just plug it into your computer and start recording. What is a USB Condenser Microphone? As the primary type of microphone used in recording studios and radio stations, condenser microphones are the ideal choice for capturing vocals and acoustic instruments. Unlike a dynamic microphone, a condenser microphone collects sound from throughout an environment such as a room, rather than only picking up what's happening directly in front of it. It is capable of capturing much more detail with a wider, flatter frequency response. Trouble is, conventional condenser microphones aren't made to interface with a computer—you have to provide a microphone preamplifier and an analog to a USB interface. The C-1U has a built-in USB interface that derives the needed power directly from your computer's USB input and requires no special drivers. Just plug in and start recording your music. Unlike most other USB microphones, you won't need to download any additional drivers to begin using the Behringer C-1U right out of the box—it even works with Vista. You also get an extensive software package that includes: Audacity for recording, Kristal Audio Engine for editing and multitracking, plus Podifier uploading software and PodNova downloading software. It works like this: Connect the mic to your PC or Mac. Load Audacity and save your recording onto your hard drive. Now load the included Kristal software and you can edit your recording or add tracks. Now you're ready to upload your work onto the Web via Podifier. Getting started with the USB mic may seem like child's play, but this pro-caliber microphone is anything but a toy. It has an exceptionally flat frequency response and pristine sonic resolution that ensures content-rich audio that is as natural sounding as the original source. The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. The Behringer C-1U's ultra low-noise, transformerless field-effect transistor (FET) input circuitry can handle extreme dynamics, all the way up to 136 dB, with ruler-flat frequency response from 40 Hz to 20 kHz. That means that even if the special guest on your next podcast happens to be a revved-up jet engine, this workhorse mic will not distort. Why You Need a Behringer C-1U USB Microphone: •Far better sound quality than the dynamic microphones you may be using •With its built-in USB interface and comprehensive software package, just plug it in and start laying down tracks •You don't have to download any new drivers, and it's perfectly compatible with Windows XP/Vista and Mac Features Professional large-diaphragm condenser microphone with a built-in 48 kHz USB Interface for unsurpassed audio quality Gets phantom power directly from PC USB output Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software Maximum SPL (sound pressure level) of 136 dB Ideal as main and support microphone for studio and live applications Exceptionally flat frequency response and ultra-high sound resolution Cardioid pickup pattern for outstanding sound source separation and feedback rejection Ultra low-noise transformerless FET input circuitry LED indicates phantom power operation C-1U USB Studio Condenser Mic Specifications: Transducer type: condenser, 0.63'' Polar pattern: cardioid Frequency response: 40 Hz - 20 kHz Max. SPL (1 % THD 1 kHz): 136dB Connector: USB connector type B Power supply: 5 V, max. 50 mA (via USB) Dimensions: shaft diameter: 2.1", length: 6.7" Weight (net): approx

Size: 32inch black cabinet with sliver bezel and plastic stand base,light logo Chassis Solution:Mstar(TSUMV59) ATV System:PAL B/G D/K I, NTSC Comb Filter:3D Brightness:220cd/m2±10% Contrast:3000:1 Response time:6.5ms View angle:176°(H) X 176°(V) CR?10 HDTV Compatible(YPBPR):480p,720p,1080i,1080p OSD Language:English/French/Arabic/Russia/FARSI/Chinese Build In Tuner VGA Input: x 1 HDMI(DVI Video) Input: x 1 USB Input: x 1 Stereo Audio Input(RCA):x1(RCA), x 1(Headphone for VGA/DVI Audio) Antenna Input: (DIN Type) x 1

The Xbee mini-USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter. USB Input Voltage: +5V Current: 50mA Dimensions: mm Weight: 20g Features: Used for the XBee module configuration parameters Easily connected to a PC via mini USB cable XBee-setting support software X-CTU Also used as a USB-TTL adapter Voltage: +5V(USB Power) Package Include: - 1*Xbee mini-USB adapter - 1*USB cable

Put The Original Dynamic USB Mic In Your Hands. Samson presents the Q1U, the very first dynamic handheld USB microphone, which remains the most affordable choice for simple, versatile handheld dynamic miking capabilities. Features: Plugs directly into any computer with a USB input, no drivers required Compatible with most computer-based digital audio workstation software High SPL neodymium element Supercardioid pickup pattern 16-bit, kHz resolution Smooth, flat frequency response of 50Hz–16kHz Includes desktop mic stand, mic clip, USB cable and carry pouch Samson Sound Deck Noise Cancellation Software (Mac OS X/Windows) available for purchase

USB charger output to 5V/500ma,suitable for cellphone,gps,ipod and PDA Triple socket with 12V output A fuse is included with the product DC 12V using only Performance explanation: Input Voltage: DC12-DC16V Output current: Max.DC5A(except USB) USB Output voltage/current: DC5V-Max 5.4V/500MA Total output power: 60W(except USB) Working conditions: Temperature: 0-60 C Ralative humidity: 5%-70% Color: White and Black for optional! Packing: Quantity: 120pcs/Carton G.W: 17KG N.W: 15KG Measure: CM For More Detail Plz Vist Now, www.bigbrand.pk Contact:- Muhammad Azeem - Email:- FaceBook:- https://www.facebook.com/Bigbrand.pakistan FREE DELIVERY ALL OVER IN PAKISTAN muhammad azeem -

Input Voltage: DC 5 V Audio Out: L R G (it must be connected to amplifier) Receive audio signals from mobile Extraordinary Range 10 meters. Smallest and Powerful Best for any kind of amplifier. Dimensions: 24mm x 15mm x 1mm

Type Audio Midi Interfaces Product Description A 24-bit USB recording interface. The compact Alesis iO2 EXPRESS audio-recording interface is ideal for home studios and portable recording setups. The 2-channel USB interface for Mac and PC-based systems enables you to record at up to 24-bit resolution for input into virtually all DAW, recording, and performance software. The Alesis i02 EXPRESS recording interface is small enough to comfortably fit into your mobile recording rig, laptop bag, or backpack, yet it contains high-quality components and circuitry suitable for the studio. Flexible recording and playback The i02 EXPRESS interface's discrete-design preamplifiers and true 48-volt phantom power ensure that you capture microphones' complete signal. High quality analog-to-digital and digital-to-analog converters ensure that every detail of your session or performance gets recorded – and played back on your monitoring system. It's class compliant, so you can use the plug-and-play Alesis iO2 EXPRESS with virtually any computer. The iO2 EXPRESS is USB bus powered so you won't need to carry a bulky power supply, and its performance is optimized for minimal laptop battery drain so you'll be able to track long sessions and gigs remotely. Complete iO The iO2 EXPRESS has 2 input channels. Each channel has an XLR microphone input, a 1/4" TRS insert for external effects units, and a 1/4" TS jack that works with line-level sources and can accommodate direct connection of guitars. The Alesis iO2 EXPRESS sends and receives 2 audio channels on a single USB cable for simple, universal interface. You can monitor your sessions on any studio monitoring or other loudspeaker system via dual 1/4" balanced outputs. For remote tracking and alternative playback, the iO2 EXPRESS has a 1/4" TRS headphone output. The iO2 EXPRESS features traditional MIDI In and Out jacks for playing and controlling software with keyboard and pad controllers, workstations, and other MIDI-compatible instruments. Level management Each channel has a gain trim control, and there's a master level control for optimal gain staging. When monitoring on headphones, you'll appreciate the dedicated volume control. You can also visually monitor levels and operation using the tricolor, stereo metering tree and lighted status indicators. Complete the package The Alesis iO2 EXPRESS comes complete with a copy of Steinberg Cubase LE digital audio workstation (DAW) software. Cubase is one of the most popular DAWs in the world thanks to its intuitive approach to composing, recording, editing, and mixing. In addition to the included software, the Alesis iO2 EXPRESS is compatible with virtually all audio and MIDI software. Features 2-channel computer audio recording interface Record up to 24-bit/48kHz audio into virtually any software Monitor sessions with balanced studio monitor and headphone outputs High-quality A/D and D/A converters, discrete-design preamps, 48V phantom power Inputs for microphones, line-level sources, and instruments including guitars Tricolor stereo level meter and lighted status indicators for visual monitoring MIDI Input and Output jacks for playing and controlling software instruments USB bus powered – no external power supply needed Includes: iO2 EXPRESS interface USB cable iO2 Express Audio Interface Specifications: SYSTEM REQUIREMENTS Mac: OS X 10.2+ Windows: XP, Vista, or 7 USB port FREQUENCY RESPONSE MIC/LINE IN to USB OUT: ±0.1dB MIC/LINE IN to MAIN OUT (through ADC/DAC) ±0.35dB SIGNAL-TO-NOISE RATIO (SNR) MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 ohms GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 ohms GUITAR IN (unbalanced) to USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 ohms TOTAL HARMONIC DISTORTION + NOISE (THD+N) MIC/LINE IN (balanced) to INSERT OUT: GUITAR IN (unbalanced) to INSERT OUT: % Input Gain = minimum, 1KHz input signal, INSERT OUT = 5.3dBV MIC/LINE IN (balanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.3dBFS GUITAR IN (unbalanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.7dBFS MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV

Type Audio Midi Interfaces Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. You can record into the DAW in real time, whilst hearing a zero latency monitor feed from their input sources, controlled by a single knob for easy blending between direct monitoring and DAW playback. In common with other interfaces in the Scarlett series, input level controls feature a novel LED “signal halo” around the knob that indicates signal presence (green) and input overload (red), while a large-diameter silver volume knob gives you full and accurate control over monitor levels at all times, so whether you are mixing your music, or listening back to the track, the levels will always be in your control.Alongside the two Focusrite preamps are four RCA phono outputs, two of which are also available on balanced TRS sockets. These, coupled with the high-level headphone output and flexible monitoring capability make Scarlett 2i4 ideal for digital DJs. Send outputs 1 & 2 to the main PA and use 3 & 4 for cueing, or send all four to a mixer. The converter performance ensures that the quality of the audio streamed from the computer is sonically superb. An A/B source switch for monitoring either of two stereo output pairs via the high-level headphone output provide everything that’s required from a DJ interface.MIDI input and output are included in Scarlett 2i4, allowing capture of performances with MIDI keyboards and controllers and the ability to play parts out to instruments and sound modules, recording their audio via 2i4’s TRS inputs.Scarlett 2i4 comes complete with an excellent package of software tools to help you get your music down straight away. The latest version of the Focusrite Scarlett Plug-in Suite includes Compressor, Reverb, Gate and EQ in the form of VST/AU/RTAS plug-ins. Focusrite’s established Xcite+ bundle is also included, which features Ableton Live Lite (for all your production, performance and compositional needs), Novation’s Bass Station soft synth and over 1GB of royalty-free samples from Loopmasters.Scarlett 2i4 delivers high quality, 24-bit 96kHz audio to and from both Macintosh and Windows computers with USB 2.0 capability – and it’s bus powered so you only need to plug in the included USB cable to start making music. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Type Audio Interfaces Product Description Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Unique halo signal indicators, also found on Scarlett 2i2, let you know that you’ve got a good volume for recording. Red means that your signal is clipping, and that you should reduce the gain. The halo will momentarily turn amber as the signal returns to a healthy level, at which point the halo will turn green again. A large monitor dial provides a tactile control for the volume of your speakers and headphones, whilst a high-quality headphone amp provides a clean yet loud signal to headphones connected to the front panel socket. The direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs. This allows you to hear the incoming signal with no latency, which can be distracting and affect your performance. On the rear panel you will find phono outputs allowing you to connect iTrack Solo to a pair of powered speakers, or to your home Hi-Fi system. The speaker volume can then be controlled using the large dial on the front of iTrack Solo meaning everything you need is within reach. iTrack Solo will also work with Mac and PC allowing you to record with your desktop or laptop. There is an included version of Ableton Live Lite and Focusrite’s Scarlett Plug-In Suite, which provides essential effects for recording – Reverb, Compression, Gate and EQ. *Please note that at current, GarageBand for iOS will record two simultaneous inputs to a single stereo track, which cannot be separated using iPad. The two separate signals can be separated by transferring your session to a Mac. Other apps are available which allow recording to two separate tracks simultaneously. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu Instrument Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N %: (measured with -1dBFS input and 22Hz/22kHz bandpass filter) Noise: -87dBu (22Hz/22kHz bandpass filter) Gain Range: -10dB to +55dB Max Input Level: -3dBu Analogue Output Performance Nominal Output Level: 0dBFS = +9dBu, unbalanced Frequency Response: 20Hz - 20kHz +/- 0.2dB Noise: -87dBu (22Hz/22kHz bandpass filter) Gain Range: +10dB to +55dB Max Input Level: -3dBu Analogue Output Performance Nominal Output Level: 0dBFS = 10dBu, balanced Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Digital Performance Clock sources: Internal clock only A-D Dynamic Range: 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range: 114dB D-A Dynamic Range: 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range: 114dB Supported sample rates: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz – Mac and PC 44.1kHz, 48kHz – iPad Crosstalk Input to Input: Better than 90dB Output to Output: Better than 90dB Input to Output: Better than 85dB Input Metering Ring LED lit Green: Signal present (-24 dBFS) Ring LED lit Red: Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height: 45mm / 1-3/4“ Width: 150mm / 6” Depth: 100mm / 4” Weight 500g / 1lb.

Type Audio Midi Interfaces Product Description Two-channel USB audio/MIDI interface. The M-Track interface from M-Audio® transforms your computer into a digital recording studio with plug-and-play simplicity. A single USB cable provides both power and a data connection to and from your laptop or desktop computer. M-Track offers the right connections for any instrument, from an electric guitar to a professional condenser mic—phantom power is provided. The low-profile format delivers professional control in a portable package. M-Track includes both Ignite by AIR and Ableton™ Live Lite music software programs. Accommodating Inputs M-Track is equipped with a versatile array of inputs to provide the best results with any type of audio source. Each channel offers an XLR input and a balanced 1/4" input. The XLR input is designed to work with microphones or other Lo-Z sources. The phantom power switch delivers 48V to the XLR inputs for use with professional condenser microphones. The 1/4" input can be set to receive line level signal, or switched to allow an electric guitar or bass to be plugged directly into the M-Track. The gain knob ensures the proper input level. Inserts Each input channel is also equipped with an insert jack, a professional addition not often found in this class of interface. The insert jack allows studio-grade effects to be used with any input source as you record. Improved Monitoring for Better Recordings M-Track offers ultra-low latency monitoring of the input signal—either through the speakers or via headphones. The monitor mix knob adjusts the balance between the direct inputs and the playback from your computer software. In addition, the input signal(s) can be monitored in stereo or mono using the convenient Stereo/Mono switch. This makes it easy to record new parts or add parts to an existing composition. The Headphone output offers its own level control. MIDI Matters In addition to the two audio channels, M-Track also support 16 channels of MIDI data and timing information. The MIDI In and MIDI out jack are compatible with all MIDI equipment. LED Metering Multi-color LED metering provides instant visual feedback of the main output levels, as well as the status of various M-Track settings. Ignite Ignite provides a refreshingly original and musician-centric way to quickly capture, combine, and arrange your musical ideas. The intuitive graphic interface encourages you to experiment and explore new directions. Smart MIDI Chord and Phrase Players empower your ideas and bring them to life through over 275 superior instruments sounds created by AIR Music Technology. When you’re ready to collaborate with other musicians or take your ideas to the next level, you can share them through SoundCloud, or export your WAV and MIDI files and import them into Pro Tools—or any DAW software. Best of all, Ignite offers seamless integration with your M-Audio keyboard controller, with no set-up chores to perform. Features Audio and MIDI unites your computer-based music studio USB power provides convenience and mobility Phantom power plus guitar-level switching accommodates any audio source Insert jack on each channel easily incorporate your favorite effects M-Track with Ignite Specifications: Minimum System Requirements (PC) Ignite Minimum System Requirements Windows 7 Home Premium, Professional, Ultimate (Service Pack 1), Windows 8, or Windows 8 Pro Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: ASIO or WASAPI (Windows) Minimum System Requirements (Mac) Ignite Minimum System Requirements Mac OS X or 10.8 Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: Core Audio (Mac)

Two-channel USB audio/MIDI interface. The M-Track interface from M-Audio® transforms your computer into a digital recording studio with plug-and-play simplicity. A single USB cable provides both power and a data connection to and from your laptop or desktop computer. M-Track offers the right connections for any instrument, from an electric guitar to a professional condenser mic—phantom power is provided. The low-profile format delivers professional control in a portable package. M-Track includes both Ignite by AIR and Ableton™ Live Lite music software programs. Accommodating Inputs M-Track is equipped with a versatile array of inputs to provide the best results with any type of audio source. Each channel offers an XLR input and a balanced 1/4" input. The XLR input is designed to work with microphones or other Lo-Z sources. The phantom power switch delivers 48V to the XLR inputs for use with professional condenser microphones. The 1/4" input can be set to receive line level signal, or switched to allow an electric guitar or bass to be plugged directly into the M-Track. The gain knob ensures the proper input level. Inserts Each input channel is also equipped with an insert jack, a professional addition not often found in this class of interface. The insert jack allows studio-grade effects to be used with any input source as you record. Improved Monitoring for Better Recordings M-Track offers ultra-low latency monitoring of the input signal—either through the speakers or via headphones. The monitor mix knob adjusts the balance between the direct inputs and the playback from your computer software. In addition, the input signal(s) can be monitored in stereo or mono using the convenient Stereo/Mono switch. This makes it easy to record new parts or add parts to an existing composition. The Headphone output offers its own level control. MIDI Matters In addition to the two audio channels, M-Track also support 16 channels of MIDI data and timing information. The MIDI In and MIDI out jack are compatible with all MIDI equipment. Features Audio and MIDI unites your computer-based music studio USB power provides convenience and mobility Phantom power plus guitar-level switching accommodates any audio source Insert jack on each channel easily incorporate your favorite effects M-Track with Ignite Specifications: Minimum System Requirements (PC) Ignite Minimum System Requirements Windows 7 Home Premium, Professional, Ultimate (Service Pack 1), Windows 8, or Windows 8 Pro Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: ASIO or WASAPI (Windows) Minimum System Requirements (Mac) Ignite Minimum System Requirements Mac OS X or 10.8 Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: Core Audio (Mac) Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Type Audio Interfaces Recording Package Product Description A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Studio-quality microphone and headphones Scarlett Studio really does give you everything you need to start recording. There’s a studio condenser microphone, the CM25, that’s specially designed to catch the life and soul of your vocals and acoustic instruments. Clean, smooth and sensitive, it captures every nuance. If you can hear it, you can record it. There’s even a high-quality, low-noise microphone cable included, to connect the CM25 to the Scarlett 2i2. The included HP60 studio monitor headphones tell it like it is. Accuracy is number one when it comes to monitoring. Unlike many headphones that flatter the sound, making it sound better than it really is, the HP60s give you a clear and accurate impression of exactly how your music sounds, so you can get it just the way you want it. And when you play it back elsewhere, it’ll sound great. Professional recording software Scarlett Studio includes all the software you need to get you going straight away. Cubase LE 6 is powerful music production software for recording and mixing. Focusrite Scarlett plug-ins are a set of essential tools for polishing your mix, like compression to tighten up that bass or keep your vocals smooth and even; equalisers to bring out the character in your sound, gating to help remove noises, and reverb to give your music the space it needs. The Novation Bass Station is a software synthesizer that you can use to add additional bass or melody sounds to your music. Because it is a synth you can create totally new sounds that no one has ever heard before, or recreate classic sounds. There is also a sample pack from Loopmasters to add drum loops or sound effects to your track. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into 32O 24mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu

A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since 1985, Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Views: 174

Plug and play, plug directly into your devices with USB port, no needed drivers.With the USB terminal to supply power, the condenser microphone needs no 48V phantom power, battery, or other assistive devices.Cardioid pick-up pattern minimizes background noise and isolates the main sound source.2m long leather cord extends your music space freely and meets your need of all aspects of enjoyment.Wide frequency response (30Hz-20kHz) makes vocal performances sound clear, natural and vibrant. How to setting it?Plug the USB cable to your computer at the same time. Ready for use.If the microphone cannot be used to your device, please check if your device has set itself correctly with the microphone. If not, please follow the step to setting it. Step 1: Open your control panel, and click on /"sound/", a window pops up.Step 2: Select the recording, you will see the microphone is set up or on default.Step 3: Double click the microphone if it is already connected., and then setting yourmicrophone properties. 1.Unplug the USB cable to check whether the pins at the bottom of the mic are loosened.2.Restart computer and re-plug the mic to other USB port.3.If the /"USB PnP Audio Device/" appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work.(Windows: Right click speaker icon on right corner of computer→/"Recording Device/"Mac: Click /"System Preferences/"→/"Sound/"→/"Input/") If the mic disconnects itself without warning, what can I do?Answer: There are two reasons for this situation. One is that the poor connection. The other is that the USB cable is broken. If you have tried to replug the USB cable into the mic, and plug the mic to other USB port, then it will be the problem of the cable. If the mic has hissing what can I do? 1.Re-plug the USB cable into the microphone. If the cable gets loose, noiseis easily generated or transmission of signal may run into problem. 2.Reset computer and re-plug microphone into other USB port. 3.Place it not too close to any power source or computer host. Check whether there's smart-phone near by the USB cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computer→/"Recording Device/"//"Playback Device/"→right click /"USB PnP Device/"/default speaker→/"Properties/"→/"Levels/". If there's /"/"Microphone Boost/"/", turn it to 0-10dB. Mac: /"System Preferences/"→/"Sound/"→/"Input/"//"Output/"→/"Input Volume/"//"Output Volume/") 5.(If using Windows computer,) disable all sound effects. (Right click speaker icon on right corner of computer→/"Playback Device/"→right click the default loudspeaker→/"Enhancements/"→click /"Disable all sound effects/".) Hope these methods could help eliminate noise and make the mic sound better. Colour:black Material:Zinc alloy + plastic Size:14.5*4.8cm Package Contents: 1* microphone 1* USB cable 1* foam cover 1* manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

An Easy-to-Use, Affordable USB Interface for Mobile Musicians You won't be exaggerating when you tell your friends that you've experienced U-PHORIA in your personal studio. The Behringer UM2 U-PHORIA USB audio interface offers plenty of punch, power, and value to recording enthusiasts, project studio owners, mobile musicians, and more. As a 2-in/2-out interface, the UM2 U-PHORIA is portable and streamlined, providing essential features for recording microphones and instruments: low-latency streaming of 2 inputs and 2 outputs, a phantom-power-supporting mic preamp with an XLR-1/4" combination input, USB for connectivity and power, and a second 1/4-inch instrument input for your guitar or bass. Compatibile across the board with both Mac- and Windows-based DAWs, the UM2 U-PHORIA is great for musicians on a budget. One Solid Mic Pre for Your Home Studio Work with all the microphones in your closet -- this 2-channel interface sports one of Behringer's MIDAS-designed XENYX XLR preamp with switchable +48V phantom power, allowing you to use professional-grade studio condenser mics, plus record an 1/4" instrument at the same time through the dedicated instrument input. With the UM2 as your DAW's front end, you can capture two channels at a 48 kHz sample rate. Direct Monitoring Button: Hear Yourself with Zero Latency This audio interface's Phones output provides a handy monitoring solution complete with its own Level control and Direct Monitor select. Likewise, Status, Signal, and Clip LEDs give you at-a-glance visual confirmation of where you stand with your audio. With this straight-forward interface, you can create killer mixes no matter where you work. USB Powered for Easy On-The-Go Recording When connected to a computer, every part of the UM2 U-PHORIA is powered by your computer's USB port, eliminating the need to carry around a power supply when you take your interface on the go. Tracktion Software Included: You Bring the Music, UM2 Brings the DAW Open up Behringer's UM2 U-PHORIA and get to work! The USB audio interface includes Tracktion 4 DAW software, which packs powerful tools for composing, editing, recording, mixing, and sharing original tracks. Bundled Native FX plug-ins, plus support for available third party AU, VST, and VSTi plug-ins allows you to expand Tracktion's capabilities with as many additional sounds, effects, and instruments as you like. Features: - 2x2 USB audio interface for recording microphones and instruments - 48 kHz resolution audio quality - Streams 2 inputs/2 outputs with low latency to your computer, supporting Mac OS X and Windows XP or higher - Built-in +48V-powered XENYX Mic Preamp - 1/4" instrument input - Phones output with Level control and Direct Monitor select - Status, Signal, and Clip indications for at-a-glance overview - USB port for connection and power - Compatible with major DAW software, such as Avid Pro Tools, Ableton Live, and Steinberg Cubase - Includes Tracktion 4 software plus 150 downloadable instrument/effect plug-ins - Rugged construction